Addresses two review threads on this PR:
1. jjmata (PR review): technical_remittance_line?'s date-stamp check required
exactly 2-digit day/month (\d{2}[./]\d{2}), so an un-padded date ("1.07."
instead of "01.07.") wasn't recognized as technical and the line would
resurface as the transaction name -- reproducing the original #2935 bug for
that date shape. Now accepts 1-2 digits for both.
2. john-frandsen (issue #2935 comment): suggested cleaning up the merchant line
further (e.g. "BILLA DANKT 0007114 SIEGENDORF 7011" -> "Billa"). Checked
point 1 (structured remittance fields) against Enable Banking's own API
docs -- no such field exists there, not applicable. Points 2/3/5 already
match current behavior. Point 4 (loyalty-marker cleanup) implemented as two
layers:
- Primary: match the line against merchants the family already knows
(Family#known_merchant_names) -- self-maintaining, no pattern-guessing,
and now also assigns the transaction's merchant when matched (previously
out of scope for blank-counterparty EB transactions). Case-insensitive,
regex-escaped, longest-match-wins, with a minimum length guard against
spurious short-name matches.
- Fallback (no known merchant yet): remove only the "DANKT"/"DANKE"
thank-you marker word itself, not a directional truncation -- the marker
can precede or follow the merchant name depending on phrasing ("X DANKT"
vs. "DANKE ... bei X"), so truncating at it risked deleting the real
merchant name in one of the two phrasings.
Verified against the full test suite, RuboCop, and Brakeman on a test-stack
Rails instance (0 RuboCop offenses, 0 Brakeman warnings; full-suite failures
present on that instance are pre-existing/environmental and unrelated to
these files).
Disclosure: this fix (investigation, implementation, and tests) was written
by Claude Code.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Address CodeRabbit/Codex review feedback on #2968: the POS/ATM+amount
prefix and the trailing date+time suffix were OR'd, so either alone
could misclassify a legitimate line as technical. A line embedding the
merchant right after the amount (e.g. "POS 45,13 BILLA DANKT ...") or
a legitimate descriptor that happens to end in a timestamp (e.g.
"Invoice paid 31.07. 10:27") would have been wrongly skipped.
Both signals are now required together in a single anchored pattern,
matching every real technical line observed in production while no
longer misclassifying either of the scenarios above.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Some ASPSPs (e.g. BankDirekt/Raiffeisen in Austria) return
remittance_information as a multi-element array where the first line is a
generic card terminal descriptor (\"POS 45,13 AT D6 31.07. 10:27\")
and a later line holds the real merchant. EnableBankingEntry::Processor
always used the first array element, so transaction names showed the
terminal string instead of the merchant.
primary_remittance_information now skips lines that look like a technical
terminal booking (POS/ATM + amount, or a trailing date+time stamp) and
prefers the first descriptive line, falling back to the original element
when nothing better is available. It also strips known small-merchant
payment-processor prefixes (SumUp, Square, iZettle, PayPal) from the
selected line.
Fixes#2935
Disclosure: this fix was written by Claude Code, verified against the
reporter's real (decrypted) Enable Banking payload and against test-stack
Rails test / RuboCop / Brakeman runs.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
* Fix 2668
* Fix CodeRabbit nitpick
* Fix Akahu parsing
* Anchor provider transaction date parsing to family timezone
* Coderabbit suggestion for Date/DateTime order
* Remove duplicate condition in wise
* Safe unless column_exists + pass family to date parse to family components
* fix(enable-banking): handle transactions missing transaction_id and entry_reference
Some ASPSPs omit both transaction_id and entry_reference from their transaction payloads, which is valid per the PSD2/Berlin Group spec. Previously, every such transaction raised an ArgumentError and was silently dropped during sync.
compute_external_id now falls back to a deterministic MD5 fingerprint (prefixed enable_banking_content_) derived from date, amount, currency, direction, counterparty, and remittance info. This fingerprint is stable across re-syncs, so duplicate imports are still correctly prevented. An ArgumentError is only raised for truly empty/unidentifiable payloads.
The importer is updated in three places to use compute_external_id
consistently: the pending pre-filter (before combining with booked),
the C4 stored-pending cleanup, and the new_transactions dedup. This means ID-less pending entries are now also removed when their settled booked counterpart arrives.
Tests cover compute_external_id directly (all 5 cases), end-to-end
fingerprint import, idempotency, and importer storage/dedup behaviour for ID-less transactions including the pending→booked settlement path.
* fix(enable-banking): implement dual-strategy matching for transaction settlement
When a stored pending row had only entry_reference (no transaction_id) and
the settled BOOK row arrived with a new transaction_id, compute_external_id
produced different fingerprints for each side (enable_banking_<ref> vs
enable_banking_<txn_id>). The fingerprint-only comparison introduced in the
previous commit never matched, leaving the stale pending entry in
raw_transactions_payload. Both rows were then imported as separate visible
transactions.
Restore a book_entry_refs set alongside book_fingerprints in both the
pending pre-filter and the C4 stored-pending cleanup. A pending entry is
now removed when either its fingerprint or its entry_reference matches a
booked counterpart — covering same-ID settlement, content-fingerprint
settlement, and the entry_reference cross-match settlement path.
Also updates the ArgumentError message in external_id to accurately
reflect that transaction_id, entry_reference, and content fingerprint
are all accepted identifiers, and aligns build_transaction_content_key
to use transaction_date as a fallback (matching compute_external_id).
Adds a regression test that stores a pending-only row and asserts it is removed when the booked counterpart arrives with a new transaction_id.
* feat(enable-banking): safe pending transaction merge with sync re-import prevention
* preserve all merged pending IDs across syncs
* fix(enable-banking): harden merge locking, safe logging, and non-blocking index
* fix(enable-banking): use safe external ID in invalid currency log
* refactor(models): centralize pending transaction SQL logic
Move the SQL fragment used to identify pending transactions from the `Entry` model to a constant in the `Transaction` model. This improves maintainability and ensures that the logic for determining if a transaction is pending is defined in a single location.
* fix(enable-banking): drop dead manual_merge index, use lateral join for excluded IDs
* No net schema changes
---------
Co-authored-by: Juan José Mata <jjmata@jjmata.com>
* EnableBanking: skip CARD-* counterparty in name
# Conflicts:
# test/models/enable_banking_entry/processor_test.rb
# Conflicts:
# test/models/enable_banking_entry/processor_test.rb
* Fix whitespace in remittance_information array
Whitespace added before 'ACME SHOP' in remittance_information.
Signed-off-by: Juan José Mata <jjmata@jjmata.com>
* Fix merchant creation for Wise and prefer remittance for Entry name if counterparty is CARD-XXX
* Fix review
* Handle scalars
* Handle empty strings
* Fix review
* Make truncate not use ellipsis at the end
---------
Signed-off-by: Juan José Mata <jjmata@jjmata.com>
Co-authored-by: quentinreytinas <quentin@reytinas.fr>
Co-authored-by: Juan José Mata <jjmata@jjmata.com>
* Initial enable banking implementation
* Handle multiple connections
* Amount fixes
* Account type mapping
* Add option to skip accounts
* Update schema.rb
* Transaction fixes
* Provider fixes
* FIX account identifier
* FIX support unlinking
* UI style fixes
* FIX safe redirect and brakeman issue
* FIX
- pagination max fix
- wrap crud in transaction logic
* FIX api uid access
- The Enable Banking API expects the UUID (uid from the API response) to fetch balances/transactions, not the identification_hash
* FIX add new connection
* FIX erb code
* Alert/notice box overflow protection
* Give alert/notification boxes room to grow (3 lines max)
* Add "Enable Banking (beta)" to `/settings/bank_sync`
* Make Enable Banking section collapsible like all others
* Add callback hint to error message
---------
Co-authored-by: Juan José Mata <juanjo.mata@gmail.com>
