fix(migration): point down_revision to actual master head (33d7e0e21daa)

Previous commits used a1b2c3d4e5f6 then ce6bd21901ab, both of which are
mid-chain on master. The true head is 33d7e0e21daa (add_semantic_layers).
Branching off mid-chain caused 'Multiple head revisions' in CI.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

.github/SECURITY.md

@@ -33,13 +33,21 @@ We kindly ask you to include the following information in your report to assist
 - Expected vs. Actual Behavior: A clear description of the intended system behavior versus the observed vulnerability.
 - Detailed Reproduction Steps: Clear, manual steps to reproduce the vulnerability.
 
+**Vulnerability Definition**
+
+Apache Superset considers a security vulnerability to be a demonstrable issue that has meaningful impact on confidentiality, integrity, or availability beyond the intended security model. Low-impact boundary variations or technical edge cases in existing access controls may be classified as hardening improvements rather than vulnerabilities, even if exploitable.
+
 **Out of Scope Vulnerabilities**
 
 To prioritize engineering efforts on genuine architectural risks, the following scenarios are explicitly out of scope and will not be issued a CVE:
-- Attacks requiring Admin privileges: (e.g., CSS injection, template manipulation, dashboard ownership overrides, or modifying global system settings). Per the CVE vulnerability definition in CNA Operational Rules 4.1, a qualifying vulnerability must allow violation of a security policy. The Admin role is a fully trusted operational boundary defined by Apache Superset's security policy; actions within this boundary do not violate that policy and are therefore considered intended capabilities 'by design,' not vulnerabilities.
-- Brute Force and Rate Limiting: Reports targeting a lack of resource exhaustion protections, generic rate-limiting, or volumetric Denial of Service (DoS) attempts.
-- Theoretical attack vectors: Issues without a demonstrable, reproducible exploit path.
-- Non-Exploitable Findings: Missing security headers, generic banner disclosures, or descriptive error messages that do not lead to a direct, documented exploit.
+- **Attacks requiring Admin privileges**: (e.g., CSS injection, template manipulation, dashboard ownership overrides, or modifying global system settings). Per the CVE vulnerability definition in CNA Operational Rules 4.1, a qualifying vulnerability must allow violation of a security policy. The Admin role is a fully trusted operational boundary defined by Apache Superset's security policy; actions within this boundary do not violate that policy and are therefore considered intended capabilities 'by design,' not vulnerabilities.
+- **Brute Force and Rate Limiting**: Reports targeting a lack of resource exhaustion protections, generic rate-limiting, or volumetric Denial of Service (DoS) attempts.
+- **Theoretical attack vectors**: Issues without a demonstrable, reproducible exploit path.
+- **Non-Exploitable Findings**: Missing security headers, generic banner disclosures, or descriptive error messages that do not lead to a direct, documented exploit.
+- **User enumeration**: API responses, timing differences, or error messages that reveal whether user accounts, IDs, dashboards, or datasets exist.
+- **Information disclosure (low impact)**: Software version disclosure, generic error messages, stack traces without sensitive data exposure, or system configuration details that don't enable further exploitation.
+- **Resource exhaustion requiring authentication**: Denial of Service attacks that require valid user credentials and don't bypass rate limiting or resource controls.
+- **Missing security headers**: Without demonstration of a concrete exploit scenario that leverages the missing header.
 
 **Outcome of Reports**
 

.github/actions/setup-docker/action.yml

@@ -27,6 +27,15 @@ runs:
     - name: Set up QEMU
       if: ${{ inputs.build == 'true' }}
       uses: docker/setup-qemu-action@29109295f81e9208d7d86ff1c6c12d2833863392 # v3.6.0
+      with:
+        # Pin the binfmt image to a specific QEMU release. The default
+        # (`tonistiigi/binfmt:latest`) is a moving target, and drift across
+        # QEMU's x86_64→aarch64 translator has been the proximate cause of
+        # intermittent `exit code: 132` (SIGILL) failures during the arm64
+        # leg of the multi-platform docker build — newer Node native modules
+        # emit instructions QEMU's user-mode emulation occasionally drops on
+        # the floor. Pinning a known-good release stabilises that path.
+        image: tonistiigi/binfmt:qemu-v8.1.5
 
     - name: Set up Docker Buildx
       if: ${{ inputs.build == 'true' }}

.github/dependabot.yml

@@ -1,7 +1,6 @@
 version: 2
 enable-beta-ecosystems: true
 updates:
-
   - package-ecosystem: "github-actions"
     directory: "/"
     ignore:
@@ -10,6 +9,8 @@ updates:
       - dependency-name: anthropics/claude-code-action
     schedule:
       interval: "daily"
+    cooldown:
+      default-days: 5
 
   - package-ecosystem: "npm"
     ignore:
@@ -57,6 +58,8 @@ updates:
       - dependabot
     open-pull-requests-limit: 30
     versioning-strategy: increase
+    cooldown:
+      default-days: 5
 
 
   - package-ecosystem: "pip"
@@ -72,6 +75,8 @@ updates:
     labels:
       - pip
       - dependabot
+    cooldown:
+      default-days: 5
 
   - package-ecosystem: "npm"
     directory: ".github/actions"
@@ -79,6 +84,8 @@ updates:
       interval: "daily"
     open-pull-requests-limit: 10
     versioning-strategy: increase
+    cooldown:
+      default-days: 5
 
   - package-ecosystem: "npm"
     directory: "/docs/"
@@ -102,6 +109,8 @@ updates:
       interval: "daily"
     open-pull-requests-limit: 10
     versioning-strategy: increase
+    cooldown:
+      default-days: 5
 
   - package-ecosystem: "npm"
     directory: "/superset-websocket/"
@@ -111,6 +120,8 @@ updates:
       - npm
       - dependabot
     versioning-strategy: increase
+    cooldown:
+      default-days: 5
 
   - package-ecosystem: "npm"
     directory: "/superset-websocket/utils/client-ws-app/"
@@ -121,6 +132,8 @@ updates:
       - dependabot
     open-pull-requests-limit: 10
     versioning-strategy: increase
+    cooldown:
+      default-days: 5
 
   # Now for all of our plugins and packages!
 
@@ -133,6 +146,8 @@ updates:
       - dependabot
     open-pull-requests-limit: 5
     versioning-strategy: increase
+    cooldown:
+      default-days: 5
 
   - package-ecosystem: "npm"
     directory: "/superset-frontend/plugins/legacy-plugin-chart-partition/"
@@ -143,6 +158,8 @@ updates:
       - dependabot
     open-pull-requests-limit: 5
     versioning-strategy: increase
+    cooldown:
+      default-days: 5
 
   - package-ecosystem: "npm"
     directory: "/superset-frontend/plugins/legacy-plugin-chart-world-map/"
@@ -153,6 +170,8 @@ updates:
       - dependabot
     open-pull-requests-limit: 5
     versioning-strategy: increase
+    cooldown:
+      default-days: 5
 
   - package-ecosystem: "npm"
     directory: "/superset-frontend/plugins/plugin-chart-pivot-table/"
@@ -166,6 +185,8 @@ updates:
       - dependabot
     open-pull-requests-limit: 5
     versioning-strategy: increase
+    cooldown:
+      default-days: 5
 
   - package-ecosystem: "npm"
     directory: "/superset-frontend/plugins/legacy-plugin-chart-chord/"
@@ -176,6 +197,8 @@ updates:
       - dependabot
     open-pull-requests-limit: 5
     versioning-strategy: increase
+    cooldown:
+      default-days: 5
 
   - package-ecosystem: "npm"
     directory: "/superset-frontend/plugins/legacy-plugin-chart-horizon/"
@@ -186,6 +209,8 @@ updates:
       - dependabot
     open-pull-requests-limit: 5
     versioning-strategy: increase
+    cooldown:
+      default-days: 5
 
   - package-ecosystem: "npm"
     directory: "/superset-frontend/plugins/legacy-plugin-chart-rose/"
@@ -196,6 +221,8 @@ updates:
       - dependabot
     open-pull-requests-limit: 5
     versioning-strategy: increase
+    cooldown:
+      default-days: 5
 
   - package-ecosystem: "npm"
     directory: "/superset-frontend/plugins/legacy-preset-chart-deckgl/"
@@ -206,6 +233,8 @@ updates:
       - dependabot
     open-pull-requests-limit: 5
     versioning-strategy: increase
+    cooldown:
+      default-days: 5
 
   - package-ecosystem: "npm"
     directory: "/superset-frontend/plugins/plugin-chart-table/"
@@ -219,6 +248,8 @@ updates:
       - dependabot
     open-pull-requests-limit: 5
     versioning-strategy: increase
+    cooldown:
+      default-days: 5
 
   - package-ecosystem: "npm"
     directory: "/superset-frontend/plugins/legacy-plugin-chart-country-map/"
@@ -229,6 +260,8 @@ updates:
       - dependabot
     open-pull-requests-limit: 5
     versioning-strategy: increase
+    cooldown:
+      default-days: 5
 
   - package-ecosystem: "npm"
     directory: "/superset-frontend/plugins/legacy-plugin-chart-map-box/"
@@ -239,6 +272,8 @@ updates:
       - dependabot
     open-pull-requests-limit: 5
     versioning-strategy: increase
+    cooldown:
+      default-days: 5
 
   - package-ecosystem: "npm"
     directory: "/superset-frontend/plugins/legacy-preset-chart-nvd3/"
@@ -249,6 +284,8 @@ updates:
       - dependabot
     open-pull-requests-limit: 5
     versioning-strategy: increase
+    cooldown:
+      default-days: 5
 
   - package-ecosystem: "npm"
     directory: "/superset-frontend/plugins/plugin-chart-word-cloud/"
@@ -259,6 +296,8 @@ updates:
       - dependabot
     open-pull-requests-limit: 5
     versioning-strategy: increase
+    cooldown:
+      default-days: 5
 
   - package-ecosystem: "npm"
     directory: "/superset-frontend/plugins/legacy-plugin-chart-paired-t-test/"
@@ -269,6 +308,8 @@ updates:
       - dependabot
     open-pull-requests-limit: 5
     versioning-strategy: increase
+    cooldown:
+      default-days: 5
 
   - package-ecosystem: "npm"
     directory: "/superset-frontend/plugins/plugin-chart-echarts/"
@@ -279,6 +320,8 @@ updates:
       - dependabot
     open-pull-requests-limit: 5
     versioning-strategy: increase
+    cooldown:
+      default-days: 5
 
   - package-ecosystem: "npm"
     directory: "/superset-frontend/plugins/plugin-chart-ag-grid-table/"
@@ -289,6 +332,8 @@ updates:
       - dependabot
     open-pull-requests-limit: 5
     versioning-strategy: increase
+    cooldown:
+      default-days: 5
 
   - package-ecosystem: "npm"
     directory: "/superset-frontend/plugins/plugin-chart-cartodiagram/"
@@ -299,6 +344,8 @@ updates:
       - dependabot
     open-pull-requests-limit: 5
     versioning-strategy: increase
+    cooldown:
+      default-days: 5
 
   - package-ecosystem: "npm"
     directory: "/superset-frontend/plugins/legacy-plugin-chart-parallel-coordinates/"
@@ -309,6 +356,8 @@ updates:
       - dependabot
     open-pull-requests-limit: 5
     versioning-strategy: increase
+    cooldown:
+      default-days: 5
 
   - package-ecosystem: "npm"
     directory: "/superset-frontend/plugins/plugin-chart-handlebars/"
@@ -323,6 +372,8 @@ updates:
       - dependabot
     open-pull-requests-limit: 5
     versioning-strategy: increase
+    cooldown:
+      default-days: 5
 
   - package-ecosystem: "npm"
     directory: "/superset-frontend/packages/generator-superset/"
@@ -333,6 +384,8 @@ updates:
       - dependabot
     open-pull-requests-limit: 5
     versioning-strategy: increase
+    cooldown:
+      default-days: 5
 
   - package-ecosystem: "npm"
     directory: "/superset-frontend/packages/superset-ui-chart-controls/"
@@ -343,6 +396,8 @@ updates:
       - dependabot
     open-pull-requests-limit: 5
     versioning-strategy: increase
+    cooldown:
+      default-days: 5
 
   - package-ecosystem: "npm"
     directory: "/superset-frontend/packages/superset-ui-core/"
@@ -358,6 +413,8 @@ updates:
       - dependabot
     open-pull-requests-limit: 5
     versioning-strategy: increase
+    cooldown:
+      default-days: 5
 
   - package-ecosystem: "npm"
     directory: "/superset-frontend/packages/superset-ui-switchboard/"
@@ -368,3 +425,5 @@ updates:
       - dependabot
     open-pull-requests-limit: 5
     versioning-strategy: increase
+    cooldown:
+      default-days: 5

.github/workflows/bashlib.sh

@@ -175,10 +175,13 @@ cypress-run-all() {
   local APP_ROOT=$2
   cd "$GITHUB_WORKSPACE/superset-frontend/cypress-base"
 
-  # Start Flask and run it in background
-  # --no-debugger means disable the interactive debugger on the 500 page
-  # so errors can print to stderr.
-  local flasklog="${HOME}/flask.log"
+  # Start the Superset backend via gunicorn (not `flask run`). The Flask
+  # development server is single-threaded and has no crash-recovery, so
+  # heavy tests (dashboard import/export, SQL Lab) can knock it offline
+  # for the rest of the run — surfacing as `ECONNREFUSED` / `socket hang up`
+  # / `Missing CSRF token` cascades. Gunicorn gives us multiple workers,
+  # a request timeout, and worker-recycling under load.
+  local serverlog="${HOME}/superset-cypress.log"
   local port=8081
   CYPRESS_BASE_URL="http://localhost:${port}"
   if [ -n "$APP_ROOT" ]; then
@@ -187,8 +190,58 @@ cypress-run-all() {
   fi
   export CYPRESS_BASE_URL
 
-  nohup flask run --no-debugger -p $port >"$flasklog" 2>&1 </dev/null &
-  local flaskProcessId=$!
+  # Mirrors the args in docker/entrypoints/run-server.sh (1 worker × 20
+  # gthread threads) to keep parity with production. Multi-worker
+  # configurations expose timing-sensitive races in the SQL Lab → Explore
+  # navigation flow under E2E. We diverge from the entrypoint on:
+  #   --timeout 120: heavy dashboard import/export specs exceed the 60s
+  #     default
+  #   --max-requests / --max-requests-jitter: recycle the worker under
+  #     test load to avoid leaks accumulating across the run
+  #   superset.app:create_app(): explicit factory so we don't depend on
+  #     FLASK_APP being exported
+  nohup gunicorn \
+    --bind "127.0.0.1:$port" \
+    --workers 1 \
+    --worker-class gthread \
+    --threads 20 \
+    --timeout 120 \
+    --max-requests 500 \
+    --max-requests-jitter 50 \
+    --access-logfile - \
+    --error-logfile - \
+    "superset.app:create_app()" \
+    >"$serverlog" 2>&1 </dev/null &
+  local serverPid=$!
+
+  # Ensure the backend is cleaned up and its log is emitted even when the
+  # test runner fails under `set -e`.
+  trap '
+    echo "::group::gunicorn log for Cypress run"
+    cat "'"$serverlog"'" || true
+    echo "::endgroup::"
+    kill '"$serverPid"' 2>/dev/null || true
+  ' EXIT
+
+  # Wait for the backend to be ready before launching Cypress; otherwise
+  # the first spec can race the server bind and see connection errors.
+  local timeout=60
+  say "Waiting for gunicorn server to start on port $port..."
+  while [ $timeout -gt 0 ]; do
+    if curl -f "http://localhost:${port}${APP_ROOT}/health" >/dev/null 2>&1; then
+      say "gunicorn server is ready"
+      break
+    fi
+    sleep 1
+    timeout=$((timeout - 1))
+  done
+  if [ $timeout -eq 0 ]; then
+    echo "::error::gunicorn server failed to start within 60 seconds"
+    echo "::group::Server startup log"
+    cat "$serverlog"
+    echo "::endgroup::"
+    return 1
+  fi
 
   USE_DASHBOARD_FLAG=''
   if [ "$USE_DASHBOARD" = "true" ]; then
@@ -200,13 +253,6 @@ cypress-run-all() {
   # memoryMonitorPid=$!
   python ../../scripts/cypress_run.py --parallelism $PARALLELISM --parallelism-id $PARALLEL_ID --group $PARALLEL_ID --retries 5 $USE_DASHBOARD_FLAG
   # kill $memoryMonitorPid
-
-  # After job is done, print out Flask log for debugging
-  echo "::group::Flask log for default run"
-  cat "$flasklog"
-  echo "::endgroup::"
-  # make sure the program exits
-  kill $flaskProcessId
 }
 
 playwright-install() {
@@ -224,9 +270,11 @@ playwright-run() {
   local APP_ROOT=$1
   local TEST_PATH=$2
 
-  # Start Flask from the project root (same as Cypress)
+  # Start the Superset backend via gunicorn from the project root.
+  # See cypress-run-all() above for the rationale — the Flask dev server
+  # cannot survive the dashboard import/export tests under load.
   cd "$GITHUB_WORKSPACE"
-  local flasklog="${HOME}/flask-playwright.log"
+  local serverlog="${HOME}/superset-playwright.log"
   local port=8081
   PLAYWRIGHT_BASE_URL="http://localhost:${port}"
   if [ -n "$APP_ROOT" ]; then
@@ -235,18 +283,37 @@ playwright-run() {
   fi
   export PLAYWRIGHT_BASE_URL
 
-  nohup flask run --no-debugger -p $port >"$flasklog" 2>&1 </dev/null &
-  local flaskProcessId=$!
+  # See cypress-run-all() above for the args rationale (1 worker × 20
+  # gthread threads matching docker/entrypoints/run-server.sh, plus a
+  # 120s timeout and request-recycling for heavy E2E load).
+  nohup gunicorn \
+    --bind "127.0.0.1:$port" \
+    --workers 1 \
+    --worker-class gthread \
+    --threads 20 \
+    --timeout 120 \
+    --max-requests 500 \
+    --max-requests-jitter 50 \
+    --access-logfile - \
+    --error-logfile - \
+    "superset.app:create_app()" \
+    >"$serverlog" 2>&1 </dev/null &
+  local serverPid=$!
 
-  # Ensure cleanup on exit
-  trap "kill $flaskProcessId 2>/dev/null || true" EXIT
+  # Ensure cleanup on exit (and emit the server log on failure)
+  trap '
+    echo "::group::gunicorn log for Playwright run"
+    cat "'"$serverlog"'" || true
+    echo "::endgroup::"
+    kill '"$serverPid"' 2>/dev/null || true
+  ' EXIT
 
   # Wait for server to be ready with health check
   local timeout=60
-  say "Waiting for Flask server to start on port $port..."
+  say "Waiting for gunicorn server to start on port $port..."
   while [ $timeout -gt 0 ]; do
     if curl -f ${PLAYWRIGHT_BASE_URL}/health >/dev/null 2>&1; then
-      say "Flask server is ready"
+      say "gunicorn server is ready"
       break
     fi
     sleep 1
@@ -254,9 +321,9 @@ playwright-run() {
   done
 
   if [ $timeout -eq 0 ]; then
-    echo "::error::Flask server failed to start within 60 seconds"
-    echo "::group::Flask startup log"
-    cat "$flasklog"
+    echo "::error::gunicorn server failed to start within 60 seconds"
+    echo "::group::Server startup log"
+    cat "$serverlog"
     echo "::endgroup::"
     return 1
   fi
@@ -271,7 +338,6 @@ playwright-run() {
     if ! find "playwright/tests/${TEST_PATH}" -name "*.spec.ts" -type f 2>/dev/null | grep -q .; then
       echo "No test files found in ${TEST_PATH} - skipping test run"
       say "::endgroup::"
-      kill $flaskProcessId
       return 0
     fi
     echo "Running tests: ${TEST_PATH}"
@@ -288,13 +354,6 @@ playwright-run() {
   fi
   say "::endgroup::"
 
-  # After job is done, print out Flask log for debugging
-  echo "::group::Flask log for Playwright run"
-  cat "$flasklog"
-  echo "::endgroup::"
-  # make sure the program exits
-  kill $flaskProcessId
-
   return $status
 }
 

.github/workflows/codeql-analysis.yml

@@ -41,7 +41,7 @@ jobs:
 
       # Initializes the CodeQL tools for scanning.
       - name: Initialize CodeQL
-        uses: github/codeql-action/init@9e0d7b8d25671d64c341c19c0152d693099fb5ba # v4
+        uses: github/codeql-action/init@7211b7c8077ea37d8641b6271f6a365a22a5fbfa # v4
         with:
           languages: ${{ matrix.language }}
           # If you wish to specify custom queries, you can do so here or in a config file.
@@ -53,6 +53,6 @@ jobs:
 
       - name: Perform CodeQL Analysis
         if: steps.check.outputs.python || steps.check.outputs.frontend
-        uses: github/codeql-action/analyze@9e0d7b8d25671d64c341c19c0152d693099fb5ba # v4
+        uses: github/codeql-action/analyze@7211b7c8077ea37d8641b6271f6a365a22a5fbfa # v4
         with:
           category: "/language:${{matrix.language}}"

.github/workflows/no-hold-label.yml

@@ -7,10 +7,13 @@ on:
 permissions:
   pull-requests: read
 
-# cancel previous workflow jobs for PRs
+# Let each label event run to completion. Cancelling in-progress runs leaves
+# CANCELLED entries in the PR's check-suite rollup, which poisons GitHub's
+# `status:success` search filter even though all real CI passed. The job is
+# a tiny no-op github-script call, so the wasted compute is negligible.
 concurrency:
   group: ${{ github.workflow }}-${{ github.event.pull_request.number || github.run_id }}
-  cancel-in-progress: true
+  cancel-in-progress: false
 
 jobs:
   check-hold-label:

.github/workflows/superset-e2e.yml

@@ -42,7 +42,7 @@ jobs:
       matrix:
         parallel_id: [0, 1, 2, 3, 4, 5]
         browser: ["chrome"]
-        app_root: ["", "/app/prefix"]
+        app_root: ${{ github.event_name == 'push' && fromJSON('["", "/app/prefix"]') || fromJSON('[""]') }}
     env:
       SUPERSET_ENV: development
       SUPERSET_CONFIG: tests.integration_tests.superset_test_config
@@ -161,7 +161,7 @@ jobs:
       fail-fast: false
       matrix:
         browser: ["chromium"]
-        app_root: ["", "/app/prefix"]
+        app_root: ${{ github.event_name == 'push' && fromJSON('["", "/app/prefix"]') || fromJSON('[""]') }}
     env:
       SUPERSET_ENV: development
       SUPERSET_CONFIG: tests.integration_tests.superset_test_config

.github/workflows/superset-translations-comment.yml

@@ -0,0 +1,87 @@
+name: Translation Regression Comment
+
+on:
+  workflow_run:
+    workflows: ["Translations"]
+    types: [completed]
+
+# This workflow posts a PR comment when the Translations workflow detects a
+# regression. It uses the workflow_run trigger so that it always runs in the
+# base-branch context and can safely be granted write permissions, even for
+# PRs from forks.
+#
+# IMPORTANT: This workflow must NEVER check out code from the PR branch.
+# All data comes from the artifact uploaded by the Translations workflow.
+
+permissions:
+  pull-requests: write
+  actions: read
+
+jobs:
+  post-comment:
+    runs-on: ubuntu-24.04
+    # Only act when the Translations workflow failed (which means a regression
+    # was detected — the workflow exits 1 on regression).
+    if: github.event.workflow_run.conclusion == 'failure'
+
+    steps:
+      - name: Download regression artifact
+        id: download
+        continue-on-error: true
+        uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8
+        with:
+          name: translation-regression
+          run-id: ${{ github.event.workflow_run.id }}
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+          path: /tmp/translation-regression
+
+      - name: Post or update PR comment
+        if: steps.download.outcome == 'success'
+        uses: actions/github-script@3a2844b7e9c422d3c10d287c895573f7108da1b3 # v9.0.0
+        with:
+          script: |
+            const fs = require('fs');
+
+            const prNumberFile = '/tmp/translation-regression/pr-number.txt';
+            const reportFile = '/tmp/translation-regression/regression-report.md';
+
+            if (!fs.existsSync(prNumberFile) || !fs.existsSync(reportFile)) {
+              console.log('Artifact files not found, skipping comment.');
+              return;
+            }
+
+            const prNumber = parseInt(fs.readFileSync(prNumberFile, 'utf8').trim(), 10);
+            if (!prNumber) {
+              console.log('Could not parse PR number, skipping comment.');
+              return;
+            }
+
+            const report = fs.readFileSync(reportFile, 'utf8');
+            const marker = '<!-- translation-regression-bot -->';
+            const body = `${marker}\n${report}`;
+
+            const { data: comments } = await github.rest.issues.listComments({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              issue_number: prNumber,
+            });
+
+            const existing = comments.find(c => c.body && c.body.includes(marker));
+
+            if (existing) {
+              await github.rest.issues.updateComment({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                comment_id: existing.id,
+                body,
+              });
+              console.log(`Updated existing comment ${existing.id} on PR #${prNumber}`);
+            } else {
+              await github.rest.issues.createComment({
+                owner: context.repo.owner,
+                repo: context.repo.repo,
+                issue_number: prNumber,
+                body,
+              });
+              console.log(`Created new comment on PR #${prNumber}`);
+            }

.github/workflows/superset-translations.yml

@@ -20,6 +20,9 @@ concurrency:
 jobs:
   frontend-check-translations:
     runs-on: ubuntu-24.04
+    permissions:
+      contents: read
+      pull-requests: read
     steps:
       - name: "Checkout ${{ github.ref }} ( ${{ github.sha }} )"
         uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6
@@ -51,12 +54,16 @@ jobs:
 
   babel-extract:
     runs-on: ubuntu-24.04
+    permissions:
+      contents: read
+      pull-requests: read
     steps:
       - name: "Checkout ${{ github.ref }} ( ${{ github.sha }} )"
         uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6
         with:
           persist-credentials: false
           submodules: recursive
+
       - name: Check for file changes
         id: check
         uses: ./.github/actions/change-detector/
@@ -64,12 +71,85 @@ jobs:
           token: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Setup Python
-        if: steps.check.outputs.python
+        if: steps.check.outputs.python == 'true' || steps.check.outputs.frontend == 'true'
         uses: ./.github/actions/setup-backend/
 
-      - name: Install msgcat
-        run: sudo apt update && sudo apt install gettext
+      - name: Install gettext tools
+        if: steps.check.outputs.python == 'true' || steps.check.outputs.frontend == 'true'
+        run: sudo apt-get update && sudo apt-get install -y gettext
 
-      - name: Test babel extraction
-        if: steps.check.outputs.python
+      # Fetch the base ref so we can compare PR-introduced regressions
+      # against a fair baseline (also runs babel_update against the base
+      # source) — this isolates the PR's contribution from any pre-existing
+      # drift on the base branch.
+      - name: Fetch base ref and create comparison worktree
+        if: steps.check.outputs.python == 'true' || steps.check.outputs.frontend == 'true'
+        run: |
+          # For PRs use the base branch; for direct pushes compare against the previous commit.
+          BASE_REF="${{ github.event.pull_request.base.ref }}"
+          if [ -n "$BASE_REF" ]; then
+            git fetch --depth=1 origin "$BASE_REF"
+          else
+            git fetch --depth=2 origin "${{ github.ref }}"
+          fi
+          git worktree add /tmp/base-worktree FETCH_HEAD
+
+      # Run babel_update against BASE source + BASE translations. Any drift
+      # already present on the base branch (source strings that have changed
+      # without .po updates) shows up here as fuzzies — and will also show
+      # up in the PR run, so it cancels out in the comparison.
+      - name: Baseline — run babel_update against BASE source
+        if: steps.check.outputs.python == 'true' || steps.check.outputs.frontend == 'true'
+        working-directory: /tmp/base-worktree
         run: ./scripts/translations/babel_update.sh
+
+      - name: Record baseline translation counts
+        if: steps.check.outputs.python == 'true' || steps.check.outputs.frontend == 'true'
+        run: |
+          python scripts/translations/check_translation_regression.py \
+            --count \
+            --translations-dir /tmp/base-worktree/superset/translations \
+            > /tmp/before.json
+
+      # Reset the PR worktree's translations to the pristine BASE state so
+      # both babel_update runs start from the same .po files. The only
+      # difference between the runs is the source code.
+      - name: Reset PR worktree translations to pristine BASE
+        if: steps.check.outputs.python == 'true' || steps.check.outputs.frontend == 'true'
+        run: git checkout FETCH_HEAD -- superset/translations/
+
+      - name: Run babel_update against PR source
+        if: steps.check.outputs.python == 'true' || steps.check.outputs.frontend == 'true'
+        run: ./scripts/translations/babel_update.sh
+
+      - name: Check for translation regression
+        id: regression
+        if: steps.check.outputs.python == 'true' || steps.check.outputs.frontend == 'true'
+        continue-on-error: true
+        run: |
+          python scripts/translations/check_translation_regression.py \
+            --compare /tmp/before.json \
+            --report /tmp/regression-report.md
+
+      # Save the PR number so the comment workflow can post the report without
+      # needing write permissions on this pull_request-triggered job.
+      - name: Save PR number for comment workflow
+        if: >-
+          github.event_name == 'pull_request' &&
+          steps.regression.outcome == 'failure'
+        run: echo "${{ github.event.pull_request.number }}" > /tmp/pr-number.txt
+
+      - name: Upload regression artifact
+        if: >-
+          github.event_name == 'pull_request' &&
+          steps.regression.outcome == 'failure'
+        uses: actions/upload-artifact@043fb46d1a93c77aae656e7c1c64a875d1fc6a0a # v7
+        with:
+          name: translation-regression
+          path: |
+            /tmp/regression-report.md
+            /tmp/pr-number.txt
+
+      - name: Fail if regression detected
+        if: steps.regression.outcome == 'failure'
+        run: exit 1

.gitignore

@@ -115,6 +115,8 @@ release.json
 superset/translations/**/messages.json
 # these mo binary files are generated by `pybabel compile`
 superset/translations/**/messages.mo
+# cross-language index generated by scripts/translations/build_translation_index.py
+superset/translations/translation_index.json
 
 docker/requirements-local.txt
 

.pre-commit-config.yaml

@@ -50,7 +50,7 @@ repos:
     hooks:
       - id: check-docstring-first
       - id: check-added-large-files
-        exclude: ^.*\.(geojson)$|^docs/static/img/screenshots/.*|^superset-frontend/CHANGELOG\.md$|^superset/examples/.*/data\.parquet$
+        exclude: ^.*\.(geojson)$|^docs/static/img/screenshots/.*|^superset-frontend/CHANGELOG\.md$|^superset/examples/.*/data\.parquet$|^superset/translations/.*\.po$
       - id: check-yaml
         exclude: ^helm/superset/templates/
       - id: debug-statements

.pylintrc

@@ -53,7 +53,7 @@ extension-pkg-whitelist=pyarrow
 
 [MESSAGES CONTROL]
 disable=all
-enable=json-import,disallowed-sql-import,consider-using-transaction
+enable=disallowed-sql-import,consider-using-transaction
 
 
 [REPORTS]

Dockerfile

@@ -202,6 +202,8 @@ RUN mkdir -p /app/data && chown -R superset:superset /app/data
 
 # Copy compiled things from previous stages
 COPY --from=superset-node /app/superset/static/assets superset/static/assets
+# Copy service.worker.js optionall as it doesn't exist when DEV_MODE=true
+COPY --from=superset-node /app/superset/static/service-worker.j[s] superset/static/service-worker.js
 
 # TODO, when the next version comes out, use --exclude superset/translations
 COPY superset superset

docs/developer_docs/contributing/development-setup.md

@@ -88,7 +88,6 @@ using our `docker compose` constructs to support production-type use-cases. For
 environments, we recommend using [minikube](https://minikube.sigs.k8s.io/docs/start/) along
 our [installing on k8s](https://superset.apache.org/docs/installation/running-on-kubernetes)
 documentation.
-configured to be secure.
 :::
 
 ### Supported environment variables

docs/developer_docs/contributing/howtos.md

@@ -335,6 +335,92 @@ npm run build-translation
 pybabel compile -d superset/translations
 ```
 
+### Backfilling missing translations with AI
+
+For languages with many untranslated strings, the repo includes a script that
+uses Claude AI to generate draft translations for any missing entries. All
+AI-generated strings are marked `#, fuzzy` and tagged with an attribution
+comment so that human reviewers know they need to be checked before merging.
+
+#### Prerequisites
+
+```bash
+pip install -r superset/translations/requirements.txt
+```
+
+Claude Code must be installed and authenticated (`claude --version` should
+work). The script calls `claude -p` internally — no separate API key is needed.
+
+#### Step 1 — Build the translation index
+
+The index captures every already-translated string in every language and
+serves as cross-language context for the AI. Rebuild it whenever `.po` files
+change significantly:
+
+```bash
+python scripts/translations/build_translation_index.py
+# Writes: superset/translations/translation_index.json
+```
+
+#### Step 2 — Preview with a dry run
+
+Check what would be translated without writing anything:
+
+```bash
+python scripts/translations/backfill_po.py --lang fr --limit 20 --dry-run
+```
+
+Output shows each string, its translation, and a context tag:
+- No tag — 3+ reference languages available (high confidence)
+- `[ctx:N]` — only N other languages have this string (lower confidence)
+- `[ctx:0]` — no other language has this string yet; English alone used
+
+#### Step 3 — Run the backfill
+
+```bash
+python scripts/translations/backfill_po.py --lang fr
+```
+
+Options:
+
+| Flag | Default | Description |
+|------|---------|-------------|
+| `--lang LANG` | required | ISO language code (`fr`, `de`, `ja`, …) |
+| `--batch-size N` | 50 | Strings per Claude request |
+| `--limit N` | unlimited | Stop after N entries |
+| `--min-context N` | 0 | Skip entries with fewer than N reference translations |
+| `--model MODEL` | `claude-sonnet-4-6` | Claude model to use |
+| `--dry-run` | off | Print without writing |
+| `--no-fuzzy` | off | Don't mark entries as fuzzy |
+
+Use `--min-context 2` to skip strings that have fewer than 2 reference
+translations in other languages. Those strings are more likely to be ambiguous
+(short labels, UI fragments) where the correct meaning can't be inferred
+without additional context.
+
+#### Step 4 — Review and commit
+
+Open the target `.po` file and search for `fuzzy`. For each generated entry:
+
+1. Verify the translation is correct for the UI context.
+2. Remove the `# Machine-translated via backfill_po.py` comment and the
+   `#, fuzzy` flag line once you are satisfied.
+3. If the translation is wrong, correct the `msgstr` before removing the flag.
+4. Commit the `.po` file — do **not** commit `translation_index.json` (it is
+   gitignored and regenerated locally).
+
+#### Running via npm
+
+From `superset-frontend/`:
+
+```bash
+# Rebuild index
+npm run translations:build-index
+
+# Backfill (pass arguments after --)
+npm run translations:backfill -- --lang fr --dry-run
+```
+
 ## Linting
 
 ### Python

docs/package.json

@@ -110,7 +110,7 @@
     "prettier": "^3.8.3",
     "typescript": "~6.0.3",
     "typescript-eslint": "^8.59.4",
-    "webpack": "^5.107.0"
+    "webpack": "^5.107.1"
   },
   "browserslist": {
     "production": [

docs/yarn.lock

@@ -12270,14 +12270,7 @@ pvutils@^1.1.3, pvutils@^1.1.5:
   resolved "https://registry.yarnpkg.com/pvutils/-/pvutils-1.1.5.tgz#84b0dea4a5d670249aa9800511804ee0b7c2809c"
   integrity sha512-KTqnxsgGiQ6ZAzZCVlJH5eOjSnvlyEgx1m8bkRJfOhmGRqfo5KLvmAlACQkrjEtOQ4B7wF9TdSLIs9O90MX9xA==
 
-qs@^6.12.3:
-  version "6.14.2"
-  resolved "https://registry.yarnpkg.com/qs/-/qs-6.14.2.tgz#b5634cf9d9ad9898e31fba3504e866e8efb6798c"
-  integrity sha512-V/yCWTTF7VJ9hIh18Ugr2zhJMP01MY7c5kh4J870L7imm6/DIzBsNLTXzMwUA3yZ5b/KBqLx8Kp3uRvd7xSe3Q==
-  dependencies:
-    side-channel "^1.1.0"
-
-qs@~6.15.1:
+qs@^6.12.3, qs@~6.15.1:
   version "6.15.2"
   resolved "https://registry.yarnpkg.com/qs/-/qs-6.15.2.tgz#fd55426d710403ddccc45e0f9eab16db7727ece9"
   integrity sha512-Rzq0KEyX/w/tEybncDgdkZrJgVUsUMk3xjh3t5bv3S1HTAtg+uOYt72+ZfwiQwKdysThkTBdL/rTi6HDmX9Ddw==
@@ -14964,10 +14957,10 @@ webpack-virtual-modules@^0.6.2:
   resolved "https://registry.npmjs.org/webpack-virtual-modules/-/webpack-virtual-modules-0.6.2.tgz"
   integrity sha512-66/V2i5hQanC51vBQKPH4aI8NMAcBW59FVBs+rC7eGHupMyfn34q7rZIE+ETlJ+XTevqfUhVVBgSUNSW2flEUQ==
 
-webpack@^5.107.0, webpack@^5.88.1, webpack@^5.95.0:
-  version "5.107.0"
-  resolved "https://registry.yarnpkg.com/webpack/-/webpack-5.107.0.tgz#9e0d8d8baf24e76f058103f4f06ac6bb528b645a"
-  integrity sha512-PSxeHk/dmLYZlnTU+vL1Gej6Evg5RNtl3flhxBresfznFnzxinHMzHKloHnywM/3ouQv7/AlZCswWDIkNSggUA==
+webpack@^5.107.1, webpack@^5.88.1, webpack@^5.95.0:
+  version "5.107.1"
+  resolved "https://registry.yarnpkg.com/webpack/-/webpack-5.107.1.tgz#01ad63131b7c413f607cc00a8136f467c1f10af0"
+  integrity sha512-mvdIWxj/H6QsfgDdH9djne3a5dYcmEmtsXGESkypaGN5jXjF/b+9KDlmTDQ2TKlFUeA2fI9Y65kihD30JOdB+Q==
   dependencies:
     "@types/estree" "^1.0.8"
     "@types/json-schema" "^7.0.15"

pyproject.toml

@@ -39,7 +39,7 @@ dependencies = [
     "apache-superset-core",
     "backoff>=1.8.0",
     "celery>=5.3.6, <6.0.0",
-    "click>=8.0.3",
+    "click>=8.4.0",
     "click-option-group",
     "colorama",
     "flask-cors>=6.0.0, <7.0",
@@ -58,7 +58,7 @@ dependencies = [
     "flask-wtf>=1.1.0, <2.0",
     "geopy",
     "greenlet>=3.0.3, <=3.5.0",
-    "gunicorn>=22.0.0; sys_platform != 'win32'",
+    "gunicorn>=25.3.0, <26; sys_platform != 'win32'",
     "hashids>=1.3.1, <2",
     # holidays>=0.45 required for security fix
     "holidays>=0.45, <1",
@@ -66,7 +66,7 @@ dependencies = [
     "isodate",
     "jsonpath-ng>=1.6.1, <2",
     "Mako>=1.2.2",
-    "markdown>=3.0",
+    "markdown>=3.10.2",
     # marshmallow>=4 has issues: https://github.com/apache/superset/issues/33162
     "marshmallow>=3.0, <4",
     "marshmallow-union>=0.1",
@@ -101,9 +101,9 @@ dependencies = [
     "slack_sdk>=3.19.0, <4",
     "sqlalchemy>=1.4, <2",
     "sqlalchemy-utils>=0.38.0, <0.43", # expanding lowerbound to work with pydoris
-    "sqlglot>=28.10.0, <29",
+    "sqlglot>=30.8.0, <31",
     # newer pandas needs 0.9+
-    "tabulate>=0.9.0, <1.0",
+    "tabulate>=0.10.0, <1.0",
     "typing-extensions>=4, <5",
     "waitress; sys_platform == 'win32'",
     "watchdog>=6.0.0",
@@ -137,9 +137,9 @@ databricks = [
 db2 = ["ibm-db-sa>0.3.8, <=0.4.4"]
 denodo = ["denodo-sqlalchemy>=1.0.6,<2.1.0"]
 dremio = ["sqlalchemy-dremio>=1.2.1, <4"]
-drill = ["sqlalchemy-drill>=1.1.4, <2"]
+drill = ["sqlalchemy-drill>=1.1.10, <2"]
 druid = ["pydruid>=0.6.5,<0.7"]
-duckdb = ["duckdb>=1.4.2,<2", "duckdb-engine>=0.17.0"]
+duckdb = ["duckdb>=1.5.2,<2", "duckdb-engine>=0.17.0"]
 dynamodb = ["pydynamodb>=0.4.2"]
 solr = ["sqlalchemy-solr >= 0.2.0"]
 elasticsearch = ["elasticsearch-dbapi>=0.2.13, <0.3.0"]
@@ -220,6 +220,7 @@ development = [
     "openapi-spec-validator",
     "parameterized",
     "pip",
+    "polib",  # used by scripts/translations/ and their unit tests
     "pre-commit",
     "progress>=1.5,<2",
     "psutil",

requirements/base.txt

@@ -60,7 +60,7 @@ cffi==2.0.0
     #   pynacl
 charset-normalizer==3.4.2
     # via requests
-click==8.2.1
+click==8.4.1
     # via
     #   apache-superset (pyproject.toml)
     #   celery
@@ -166,7 +166,7 @@ greenlet==3.1.1
     #   apache-superset (pyproject.toml)
     #   shillelagh
     #   sqlalchemy
-gunicorn==23.0.0
+gunicorn==25.3.0
     # via apache-superset (pyproject.toml)
 h11==0.16.0
     # via wsproto
@@ -213,7 +213,7 @@ mako==1.3.11
     #   -r requirements/base.in
     #   apache-superset (pyproject.toml)
     #   alembic
-markdown==3.8.1
+markdown==3.10.2
     # via apache-superset (pyproject.toml)
 markdown-it-py==3.0.0
     # via rich
@@ -415,13 +415,13 @@ sqlalchemy-utils==0.42.0
     #   apache-superset (pyproject.toml)
     #   apache-superset-core
     #   flask-appbuilder
-sqlglot==28.10.0
+sqlglot==30.8.0
     # via
     #   apache-superset (pyproject.toml)
     #   apache-superset-core
 sshtunnel==0.4.0
     # via apache-superset (pyproject.toml)
-tabulate==0.9.0
+tabulate==0.10.0
     # via apache-superset (pyproject.toml)
 trio==0.30.0
     # via

requirements/development.txt

@@ -130,7 +130,7 @@ charset-normalizer==3.4.2
     # via
     #   -c requirements/base-constraint.txt
     #   requests
-click==8.2.1
+click==8.4.1
     # via
     #   -c requirements/base-constraint.txt
     #   apache-superset
@@ -219,7 +219,7 @@ docstring-parser==0.17.0
     # via cyclopts
 docutils==0.22.2
     # via rich-rst
-duckdb==1.4.2
+duckdb==1.5.3
     # via
     #   apache-superset
     #   duckdb-engine
@@ -388,7 +388,7 @@ grpcio==1.71.0
     #   grpcio-status
 grpcio-status==1.60.1
     # via google-api-core
-gunicorn==23.0.0
+gunicorn==25.3.0
     # via
     #   -c requirements/base-constraint.txt
     #   apache-superset
@@ -511,7 +511,7 @@ mako==1.3.11
     #   -c requirements/base-constraint.txt
     #   alembic
     #   apache-superset
-markdown==3.8.1
+markdown==3.10.2
     # via
     #   -c requirements/base-constraint.txt
     #   apache-superset
@@ -677,6 +677,8 @@ ply==3.11
     # via
     #   -c requirements/base-constraint.txt
     #   jsonpath-ng
+polib==1.2.0
+    # via apache-superset
 polyline==2.0.2
     # via
     #   -c requirements/base-constraint.txt
@@ -985,7 +987,7 @@ sqlalchemy-utils==0.42.0
     #   apache-superset
     #   apache-superset-core
     #   flask-appbuilder
-sqlglot==28.10.0
+sqlglot==30.8.0
     # via
     #   -c requirements/base-constraint.txt
     #   apache-superset
@@ -1004,7 +1006,7 @@ statsd==4.0.1
     # via apache-superset
 syntaqlite==0.1.0
     # via apache-superset
-tabulate==0.9.0
+tabulate==0.10.0
     # via
     #   -c requirements/base-constraint.txt
     #   apache-superset

scripts/change_detector.py

@@ -31,6 +31,7 @@ PATTERNS = {
         r"^superset/",
         r"^scripts/",
         r"^setup\.py",
+        r"^pyproject\.toml$",
         r"^requirements/.+\.txt",
         r"^.pylintrc",
     ],

scripts/translations/backfill_po.py

@@ -0,0 +1,653 @@
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+"""Backfill missing translations in a .po file using Claude AI.
+
+For each untranslated (empty msgstr) entry in the target language, the script
+sends the English source string along with all available translations in other
+languages to Claude as context, then writes the AI-generated translation back
+into the .po file marked as #, fuzzy for human review.
+
+Usage:
+  # Build the translation index first (one-time or when .po files change)
+  python scripts/translations/build_translation_index.py
+
+  # Backfill French translations
+  python scripts/translations/backfill_po.py --lang fr
+
+  # Dry run (print what would be translated without writing)
+  python scripts/translations/backfill_po.py --lang de --dry-run
+
+  # Limit to 100 entries and use a specific model
+  python scripts/translations/backfill_po.py --lang es --limit 100 \
+    --model claude-opus-4-6
+
+Options:
+  --lang LANG        ISO language code to backfill (required)
+  --batch-size N     Number of strings per Claude request (default: 50)
+  --limit N          Stop after translating N entries (default: unlimited)
+  --min-context N    Skip entries with fewer than N existing translations across
+                     reference languages (default: 0 — translate everything)
+  --model MODEL      Claude model ID (default: claude-sonnet-4-6)
+  --index PATH       Path to translation_index.json (default: auto-detect)
+  --dry-run          Print translations without writing to .po file
+  --no-fuzzy         Do not mark generated translations as fuzzy (default: mark fuzzy)
+"""
+
+from __future__ import annotations
+
+import argparse
+import json
+import re
+import shutil
+import subprocess
+import sys
+from pathlib import Path
+from typing import Any
+
+try:
+    import polib  # type: ignore[import-untyped]
+except ImportError:
+    print("polib is required. Run: pip install polib", file=sys.stderr)
+    sys.exit(1)
+
+TRANSLATIONS_DIR = Path(__file__).parent.parent.parent / "superset" / "translations"
+DEFAULT_INDEX = TRANSLATIONS_DIR / "translation_index.json"
+DEFAULT_MODEL = "claude-sonnet-4-6"
+DEFAULT_BATCH_SIZE = 50
+
+# Language names for the prompt, keyed by ISO code
+LANGUAGE_NAMES: dict[str, str] = {
+    "ar": "Arabic",
+    "ca": "Catalan",
+    "de": "German",
+    "es": "Spanish",
+    "fa": "Persian (Farsi)",
+    "fr": "French",
+    "it": "Italian",
+    "ja": "Japanese",
+    "ko": "Korean",
+    "mi": "Māori",
+    "nl": "Dutch",
+    "pl": "Polish",
+    "pt": "Portuguese",
+    "pt_BR": "Brazilian Portuguese",
+    "ru": "Russian",
+    "sk": "Slovak",
+    "sl": "Slovenian",
+    "tr": "Turkish",
+    "uk": "Ukrainian",
+    "zh": "Chinese (Simplified)",
+    "zh_TW": "Chinese (Traditional)",
+}
+
+
+def _lang_name(code: str) -> str:
+    """Return a human-readable language name for an ISO language code."""
+    return LANGUAGE_NAMES.get(code, code)
+
+
+def _plural_key(msgid: str, msgid_plural: str) -> str:
+    """Build the translation index key used for pluralized entries."""
+    return f"{msgid}\x00{msgid_plural}"
+
+
+def _is_missing(entry: polib.POEntry) -> bool:
+    """Return True for entries that need a translation."""
+    if entry.obsolete:
+        return False
+    if entry.msgid_plural:
+        return not any(v for v in entry.msgstr_plural.values())
+    return not entry.msgstr
+
+
+def _context_langs(
+    item: dict[str, Any], index: dict[str, Any], target_lang: str
+) -> list[str]:
+    """Return sorted list of language codes that have translations for this entry."""
+    key = item["index_key"]
+    if key not in index:
+        return []
+    return sorted(
+        lang for lang, val in index[key].items() if lang != target_lang and val
+    )
+
+
+def _context_count(
+    item: dict[str, Any], index: dict[str, Any], target_lang: str
+) -> int:
+    """Return the number of other-language translations available for this entry."""
+    return len(_context_langs(item, index, target_lang))
+
+
+def _render_item(
+    i: int,
+    item: dict[str, Any],
+    index: dict[str, Any],
+    target_lang: str,
+    reference_langs_sorted: list[str],
+) -> list[str]:
+    """Render one batch entry as prompt lines."""
+    lines: list[str] = []
+    ctx = _context_count(item, index, target_lang)
+    if ctx == 0:
+        lines.append(
+            f"--- [{i}] (no reference translations — translate conservatively) ---"
+        )
+    else:
+        plural = "s" if ctx != 1 else ""
+        lines.append(f"--- [{i}] ({ctx} reference translation{plural}) ---")
+    lines.append(f"English: {json.dumps(item['msgid'], ensure_ascii=False)}")
+    if item.get("msgid_plural"):
+        plural_json = json.dumps(item["msgid_plural"], ensure_ascii=False)
+        lines.append(f"English plural: {plural_json}")
+    key = item["index_key"]
+    if key in index and reference_langs_sorted:
+        for lang in reference_langs_sorted:
+            val = index[key].get(lang)
+            if val is None:
+                continue
+            if isinstance(val, dict):
+                forms = "; ".join(
+                    f"[{k}] {json.dumps(v, ensure_ascii=False)}" for k, v in val.items()
+                )
+                lines.append(f"{_lang_name(lang)}: {forms}")
+            else:
+                lines.append(
+                    f"{_lang_name(lang)}: {json.dumps(val, ensure_ascii=False)}"
+                )
+    lines.append("")
+    return lines
+
+
+def build_prompt(
+    target_lang: str,
+    batch: list[dict[str, Any]],
+    index: dict[str, Any],
+) -> str:
+    """Build the Claude prompt for a batch of entries."""
+    lang_name = _lang_name(target_lang)
+
+    # Collect which other languages actually have translations for this batch
+    reference_langs: set[str] = set()
+    for item in batch:
+        key = item["index_key"]
+        if key in index:
+            reference_langs.update(
+                lang for lang, val in index[key].items() if lang != target_lang and val
+            )
+    reference_langs_sorted = sorted(reference_langs)
+
+    lines: list[str] = [
+        "You are a professional translator specializing in software UI strings.",
+        f"Translate the following English strings into {lang_name} ({target_lang}).",
+        "",
+        "Rules:",
+        "- Preserve all format placeholders exactly: %(name)s, {name}, %s, %d, etc.",
+        "- Preserve HTML tags if present.",
+        "- Keep the same tone and register as the reference translations.",
+        "- For plural forms, provide translations for all plural forms"
+        " required by the language.",
+        "- Return ONLY a JSON object mapping each numeric index (as a string)"
+        " to its translation.",
+        "- Do not add any explanation, preamble, or markdown fences.",
+        "",
+        "Important: Many strings are short fragments or single words that are"
+        " ambiguous in English (e.g. 'Scale' could mean a measurement scale,"
+        " to scale an image, or fish scales). Use the translations in other"
+        " languages as your primary signal for which meaning is intended —"
+        " they collectively disambiguate the intended sense. When no"
+        " other-language translations are available for an entry, translate"
+        " conservatively based on the most common meaning in a data"
+        " visualization UI context.",
+        "",
+    ]
+
+    if reference_langs_sorted:
+        lines.append(
+            f"Reference translations are provided per string where available "
+            f"({', '.join(_lang_name(lc) for lc in reference_langs_sorted)})."
+        )
+        lines.append("")
+
+    lines.append("Strings to translate:")
+    lines.append("")
+
+    for i, item in enumerate(batch):
+        lines.extend(_render_item(i, item, index, target_lang, reference_langs_sorted))
+
+    # Add guidance on plural form counts per language whenever ANY entry in
+    # the batch is plural — batches mix singular and plural in .po order, so
+    # gating on the first entry would silently drop the guidance whenever
+    # the plural entries happen to land after a singular one.
+    if any(item.get("msgid_plural") for item in batch):
+        lines.append(
+            "Note: provide ALL plural forms required by the target language "
+            "(e.g. French needs 2, Russian needs 3, Arabic needs 6)."
+        )
+        lines.append("")
+
+    lines.append(
+        'Expected output format: {"0": "<translation>", "1": "<translation>", ...}'
+    )
+    lines.append("(keys are the numeric indices of the strings above)")
+
+    return "\n".join(lines)
+
+
+def parse_response(text: str, batch_size: int) -> dict[int, str]:
+    """Parse the JSON object from Claude's response."""
+    # Strip any accidental markdown fences
+    text = re.sub(r"^```[^\n]*\n", "", text.strip())
+    text = re.sub(r"\n```$", "", text)
+    try:
+        raw = json.loads(text)
+    except json.JSONDecodeError as exc:
+        raise ValueError(
+            f"Could not parse response as JSON: {exc}\n\nResponse:\n{text}"
+        ) from exc
+    # _process_batches only catches ValueError/RuntimeError, so a non-object
+    # response (list, scalar, null) must surface as ValueError rather than
+    # bubbling up an AttributeError from .items() and aborting the whole run.
+    if not isinstance(raw, dict):
+        raise ValueError(
+            f"Expected a JSON object mapping indices to translations, "
+            f"got {type(raw).__name__}.\n\nResponse:\n{text}"
+        )
+    # Preserve dict/list values as JSON strings so plural responses (where
+    # v is a dict of plural forms) can be re-parsed downstream by
+    # _apply_translation's json.loads. str(v) on a dict produces Python
+    # repr ({'0': 'x'}) which is not valid JSON.
+    return {
+        int(k): (
+            json.dumps(v, ensure_ascii=False) if isinstance(v, (dict, list)) else str(v)
+        )
+        for k, v in raw.items()
+        if str(k).isdigit()
+    }
+
+
+def translate_batch(
+    model: str,
+    target_lang: str,
+    batch: list[dict[str, Any]],
+    index: dict[str, Any],
+) -> dict[int, str]:
+    """Send a batch of strings to Claude via `claude -p`.
+
+    Returns a dict mapping batch index to translated string.
+    """
+    claude_bin = shutil.which("claude")
+    if not claude_bin:
+        raise RuntimeError(
+            "claude CLI not found. Install Claude Code or add it to PATH."
+        )
+    prompt = build_prompt(target_lang, batch, index)
+    # Pipe the prompt over stdin rather than passing it as argv: a single batch
+    # with many reference languages can grow into the tens of KB and approach
+    # ARG_MAX on some platforms.
+    # claude_bin is resolved via shutil.which — not user-controlled input
+    result = subprocess.run(  # noqa: S603
+        [claude_bin, "--model", model, "-p"],
+        input=prompt,
+        capture_output=True,
+        text=True,
+        check=False,
+    )
+    if result.returncode != 0:
+        raise RuntimeError(
+            f"claude exited with code {result.returncode}:\n{result.stderr}"
+        )
+    return parse_response(result.stdout.strip(), len(batch))
+
+
+def _apply_plural_translation(entry: polib.POEntry, translation: str) -> None:
+    """Distribute a model response across the entry's plural forms.
+
+    Model may return a JSON dict ({"0": "form0", "1": "form1"}), a JSON list
+    (["form0", "form1"], also valid since plural forms are ordered), a JSON
+    scalar (a single translation that fills every form), or a plain non-JSON
+    string (older models that ignore the JSON instruction).
+    """
+    try:
+        plural_value = json.loads(translation)
+    except (json.JSONDecodeError, ValueError):
+        for k in entry.msgstr_plural:
+            entry.msgstr_plural[k] = translation
+        return
+
+    if isinstance(plural_value, dict):
+        entry.msgstr_plural = {int(k): str(v) for k, v in plural_value.items()}
+        return
+
+    if isinstance(plural_value, list) and plural_value:
+        # Distribute list items across plural form indices in order; if the
+        # model returned fewer forms than the language requires, repeat the
+        # last form rather than leaving slots blank.
+        forms = [str(v) for v in plural_value]
+        for k in sorted(entry.msgstr_plural):
+            entry.msgstr_plural[k] = forms[k] if k < len(forms) else forms[-1]
+        return
+
+    # Scalar (or empty list) — broadcast to every form.
+    fill = str(plural_value) if plural_value not in (None, []) else translation
+    for k in entry.msgstr_plural:
+        entry.msgstr_plural[k] = fill
+
+
+def _apply_translation(
+    entry: polib.POEntry,
+    translation: str,
+    item: dict[str, Any],
+    model: str,
+    mark_fuzzy: bool,
+) -> None:
+    """Write a translation string into a POEntry and add attribution."""
+    if entry.msgid_plural:
+        _apply_plural_translation(entry, translation)
+    else:
+        entry.msgstr = translation
+
+    if mark_fuzzy and "fuzzy" not in entry.flags:
+        entry.flags.append("fuzzy")
+
+    refs = item["context_langs"]
+    refs_tag = f" [refs: {', '.join(refs)}]" if refs else " [no refs]"
+    attribution = f"Machine-translated via backfill_po.py ({model}){refs_tag}"
+    if entry.tcomment:
+        if attribution not in entry.tcomment:
+            entry.tcomment = f"{entry.tcomment}\n{attribution}"
+    else:
+        entry.tcomment = attribution
+
+
+def _build_batch_items(
+    entries: list[polib.POEntry],
+    index: dict[str, Any],
+    lang: str,
+) -> list[dict[str, Any]]:
+    """Convert a list of POEntries into the dict format used by translate_batch."""
+    items: list[dict[str, Any]] = []
+    for entry in entries:
+        if entry.msgid_plural:
+            item: dict[str, Any] = {
+                "msgid": entry.msgid,
+                "msgid_plural": entry.msgid_plural,
+                "index_key": _plural_key(entry.msgid, entry.msgid_plural),
+                "is_plural": True,
+            }
+        else:
+            item = {
+                "msgid": entry.msgid,
+                "index_key": entry.msgid,
+                "is_plural": False,
+            }
+        item["context_langs"] = _context_langs(item, index, lang)
+        item["context_count"] = len(item["context_langs"])
+        items.append(item)
+    return items
+
+
+def _process_batches(
+    missing: list[polib.POEntry],
+    index: dict[str, Any],
+    lang: str,
+    batch_size: int,
+    model: str,
+    dry_run: bool,
+    mark_fuzzy: bool,
+    cat: polib.POFile | None = None,
+    po_path: Path | None = None,
+) -> tuple[int, int]:
+    """Translate missing entries in batches. Returns (translated, failed) counts.
+
+    When ``cat`` and ``po_path`` are provided and ``dry_run`` is False, the
+    catalog is saved to disk after each batch that produced at least one
+    successful translation. This means a crash mid-run only loses the in-flight
+    batch rather than every batch translated so far.
+    """
+    translated_count = 0
+    failed_count = 0
+    for batch_start in range(0, len(missing), batch_size):
+        batch_entries = missing[batch_start : batch_start + batch_size]
+        batch_items = _build_batch_items(batch_entries, index, lang)
+        end = min(batch_start + batch_size, len(missing))
+        print(
+            f"  Translating entries {batch_start + 1}–{end} of {len(missing)} …",
+            file=sys.stderr,
+        )
+        try:
+            translations = translate_batch(model, lang, batch_items, index)
+        except (ValueError, RuntimeError) as exc:
+            print(f"  ERROR in batch starting at {batch_start}: {exc}", file=sys.stderr)
+            failed_count += len(batch_entries)
+            continue
+        batch_applied = 0
+        for i, entry in enumerate(batch_entries):
+            translation = translations.get(i)
+            if translation is None:
+                print(
+                    f"  WARNING: no translation returned for index {i} "
+                    f"(msgid: {entry.msgid[:60]!r})",
+                    file=sys.stderr,
+                )
+                failed_count += 1
+                continue
+            if dry_run:
+                ctx = batch_items[i]["context_count"]
+                ctx_tag = f" [ctx:{ctx}]" if ctx < 3 else ""
+                print(
+                    f"  [{lang}]{ctx_tag} {entry.msgid[:60]!r} → {translation[:60]!r}"
+                )
+            else:
+                _apply_translation(
+                    entry, translation, batch_items[i], model, mark_fuzzy
+                )
+                batch_applied += 1
+            translated_count += 1
+        if (
+            not dry_run
+            and batch_applied > 0
+            and cat is not None
+            and po_path is not None
+        ):
+            cat.save()
+            print(
+                f"  Saved {po_path} ({batch_applied} entry(ies) in this batch).",
+                file=sys.stderr,
+            )
+    return translated_count, failed_count
+
+
+def backfill(
+    lang: str,
+    *,
+    batch_size: int = DEFAULT_BATCH_SIZE,
+    limit: int | None = None,
+    min_context: int = 0,
+    model: str = DEFAULT_MODEL,
+    index_path: Path = DEFAULT_INDEX,
+    dry_run: bool = False,
+    mark_fuzzy: bool = True,
+) -> None:
+    """Backfill missing translations in the target language's .po file."""
+    # Defense against path traversal: ``lang`` lands in a filesystem path
+    # without further sanitization, so reject anything that isn't an
+    # ISO 639-1/639-2 code with an optional ISO 3166 region (e.g. ``pt_BR``).
+    if not re.fullmatch(r"[a-z]{2,3}(_[A-Z]{2})?", lang):
+        print(
+            f"Invalid language code: {lang!r} "
+            "(expected ISO 639 code, optionally with _<REGION>, e.g. 'fr' or 'pt_BR')",
+            file=sys.stderr,
+        )
+        sys.exit(1)
+    po_path = TRANSLATIONS_DIR / lang / "LC_MESSAGES" / "messages.po"
+    if not po_path.exists():
+        print(f"No .po file found for language '{lang}': {po_path}", file=sys.stderr)
+        sys.exit(1)
+    if not index_path.exists():
+        print(
+            f"Translation index not found at {index_path}.\n"
+            "Run: python scripts/translations/build_translation_index.py",
+            file=sys.stderr,
+        )
+        sys.exit(1)
+
+    print("Loading translation index …", file=sys.stderr)
+    with open(index_path, encoding="utf-8") as f:
+        index: dict[str, Any] = json.load(f)
+
+    print(f"Loading {po_path} …", file=sys.stderr)
+    cat = polib.pofile(str(po_path))
+
+    missing: list[polib.POEntry] = [e for e in cat if e.msgid and _is_missing(e)]
+    print(f"Found {len(missing)} untranslated entries for '{lang}'.", file=sys.stderr)
+
+    if min_context > 0:
+        before = len(missing)
+        missing = [
+            e
+            for e in missing
+            if _context_count(
+                {
+                    "index_key": (
+                        _plural_key(e.msgid, e.msgid_plural)
+                        if e.msgid_plural
+                        else e.msgid
+                    )
+                },
+                index,
+                lang,
+            )
+            >= min_context
+        ]
+        skipped = before - len(missing)
+        print(
+            f"Skipping {skipped} entries with fewer than {min_context} reference "
+            f"translation(s) (use --min-context 0 to include them).",
+            file=sys.stderr,
+        )
+
+    if limit is not None:
+        missing = missing[:limit]
+        print(f"Limiting to {limit} entries.", file=sys.stderr)
+
+    if not missing:
+        print("Nothing to do.", file=sys.stderr)
+        return
+
+    translated_count, failed_count = _process_batches(
+        missing,
+        index,
+        lang,
+        batch_size,
+        model,
+        dry_run,
+        mark_fuzzy,
+        cat=cat,
+        po_path=po_path,
+    )
+
+    print(
+        f"\nDone. Translated: {translated_count}, Failed/skipped: {failed_count}.",
+        file=sys.stderr,
+    )
+    if not dry_run and translated_count > 0:
+        print(
+            f"Translations written to {po_path} (marked #, fuzzy for review).",
+            file=sys.stderr,
+        )
+
+
+def main() -> None:
+    """Parse CLI arguments and run translation backfill."""
+    parser = argparse.ArgumentParser(
+        description="Backfill missing .po translations using Claude AI",
+        formatter_class=argparse.RawDescriptionHelpFormatter,
+        epilog=__doc__,
+    )
+    parser.add_argument(
+        "--lang", required=True, help="ISO language code (e.g. fr, de, ja)"
+    )
+    parser.add_argument(
+        "--batch-size",
+        type=int,
+        default=DEFAULT_BATCH_SIZE,
+        help=f"Strings per Claude request (default: {DEFAULT_BATCH_SIZE})",
+    )
+    parser.add_argument(
+        "--limit",
+        type=int,
+        default=None,
+        help="Maximum number of entries to translate (default: unlimited)",
+    )
+    parser.add_argument(
+        "--model",
+        default=DEFAULT_MODEL,
+        help=f"Claude model ID (default: {DEFAULT_MODEL})",
+    )
+    parser.add_argument(
+        "--index",
+        type=Path,
+        default=DEFAULT_INDEX,
+        help=f"Path to translation_index.json (default: {DEFAULT_INDEX})",
+    )
+    parser.add_argument(
+        "--dry-run",
+        action="store_true",
+        help="Print translations without modifying the .po file",
+    )
+    parser.add_argument(
+        "--min-context",
+        type=int,
+        default=0,
+        metavar="N",
+        help=(
+            "Skip entries with fewer than N reference translations in other languages "
+            "(default: 0 = translate everything). Strings with low context are more "
+            "likely to be ambiguous single words or fragments — set to e.g. 2 to only "
+            "translate strings that have been confirmed in at least 2 other languages."
+        ),
+    )
+    parser.add_argument(
+        "--no-fuzzy",
+        dest="mark_fuzzy",
+        action="store_false",
+        default=True,
+        help=(
+            "Do not mark generated translations as #, fuzzy. "
+            "WARNING: fuzzy entries are excluded from compiled .mo files. "
+            "Removing this flag causes AI-generated translations to be served "
+            "to end users without human review — only use after you have "
+            "manually verified the .po file."
+        ),
+    )
+    args = parser.parse_args()
+
+    backfill(
+        lang=args.lang,
+        batch_size=args.batch_size,
+        limit=args.limit,
+        min_context=args.min_context,
+        model=args.model,
+        index_path=args.index,
+        dry_run=args.dry_run,
+        mark_fuzzy=args.mark_fuzzy,
+    )
+
+
+if __name__ == "__main__":
+    main()

scripts/translations/build_translation_index.py

@@ -0,0 +1,153 @@
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+"""Build a cross-language translation index from all .po files.
+
+Outputs a JSON file structured as:
+  {
+    "<msgid>": {
+      "<lang>": "<translated string or null>",
+      ...
+    },
+    ...
+  }
+
+For plural entries the key is "<msgid>\x00<msgid_plural>" and the value
+is a dict mapping lang -> {0: "...", 1: "..."} (or null if untranslated).
+
+Usage:
+  python scripts/translations/build_translation_index.py
+  python scripts/translations/build_translation_index.py \
+    --translations-dir superset/translations \
+    --output /tmp/translation_index.json
+"""
+
+from __future__ import annotations
+
+import argparse
+import json
+import os
+import sys
+from pathlib import Path
+from typing import Any
+
+try:
+    import polib  # type: ignore[import-untyped]
+except ImportError:
+    print("polib is required. Install with: pip install polib", file=sys.stderr)
+    sys.exit(1)
+
+TRANSLATIONS_DIR = Path(__file__).parent.parent.parent / "superset" / "translations"
+DEFAULT_OUTPUT = (
+    Path(__file__).parent.parent.parent
+    / "superset"
+    / "translations"
+    / "translation_index.json"
+)
+
+
+def _is_translated(entry: polib.POEntry) -> bool:
+    """Return True if the entry has a non-empty, non-fuzzy translation."""
+    if "fuzzy" in entry.flags:
+        return False
+    if entry.msgid_plural:
+        return any(v for v in entry.msgstr_plural.values())
+    return bool(entry.msgstr)
+
+
+def _plural_key(entry: polib.POEntry) -> str:
+    """Build the combined key used for plural translation entries."""
+    return f"{entry.msgid}\x00{entry.msgid_plural}"
+
+
+def build_index(translations_dir: Path) -> dict[str, Any]:
+    """Read all .po files and build a combined translation index."""
+    index: dict[str, dict[str, Any]] = {}
+
+    langs = sorted(
+        d
+        for d in os.listdir(translations_dir)
+        if (translations_dir / d / "LC_MESSAGES" / "messages.po").exists()
+        and d != "en"  # en has empty msgstr by convention (source = target)
+    )
+
+    for lang in langs:
+        po_path = translations_dir / lang / "LC_MESSAGES" / "messages.po"
+        cat = polib.pofile(str(po_path))
+        for entry in cat:
+            if not entry.msgid:
+                continue  # skip header entry
+
+            if entry.msgid_plural:
+                key = _plural_key(entry)
+                if key not in index:
+                    index[key] = {}
+                # Fuzzy entries are unreviewed (often machine-generated drafts),
+                # so excluding them prevents feeding unverified translations
+                # back into the AI backfill prompt as trusted context.
+                index[key][lang] = (
+                    dict(entry.msgstr_plural) if _is_translated(entry) else None
+                )
+            else:
+                key = entry.msgid
+                if key not in index:
+                    index[key] = {}
+                index[key][lang] = entry.msgstr if _is_translated(entry) else None
+
+    # Ensure every entry has a slot for every language (null if missing)
+    for key in index:
+        for lang in langs:
+            index[key].setdefault(lang, None)
+
+    return index
+
+
+def main() -> None:
+    """Parse arguments, build the translation index, and write it to disk."""
+    parser = argparse.ArgumentParser(
+        description="Build cross-language translation index"
+    )
+    parser.add_argument(
+        "--translations-dir",
+        type=Path,
+        default=TRANSLATIONS_DIR,
+        help="Path to the translations directory (default: superset/translations)",
+    )
+    parser.add_argument(
+        "--output",
+        "-o",
+        type=Path,
+        default=DEFAULT_OUTPUT,
+        help=(
+            "Output JSON file path"
+            " (default: superset/translations/translation_index.json)"
+        ),
+    )
+    args = parser.parse_args()
+
+    print(f"Reading .po files from {args.translations_dir} …", file=sys.stderr)
+    index = build_index(args.translations_dir)
+    print(f"Indexed {len(index)} message IDs.", file=sys.stderr)
+
+    args.output.parent.mkdir(parents=True, exist_ok=True)
+    with open(args.output, "w", encoding="utf-8") as f:
+        json.dump(index, f, ensure_ascii=False, indent=2)
+
+    print(f"Written to {args.output}", file=sys.stderr)
+
+
+if __name__ == "__main__":
+    main()

scripts/translations/check_translation_regression.py

@@ -0,0 +1,250 @@
+#!/usr/bin/env python3
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+"""
+Check that source-code changes don't cause translation regressions.
+
+Usage
+-----
+Count non-fuzzy translated entries in all .po files and write JSON to stdout:
+
+    python check_translation_regression.py --count
+
+Compare the current .po state against a previously-recorded baseline and fail
+if any language lost translations:
+
+    python check_translation_regression.py --compare /path/to/before.json
+
+Optionally write a markdown report to a file (used by CI to post a PR comment):
+
+    python check_translation_regression.py --compare before.json --report report.md
+
+Use a translations directory other than the repo default (used by CI to count
+against a separate base-branch worktree):
+
+    python check_translation_regression.py --count \\
+        --translations-dir /tmp/base-worktree/superset/translations
+
+Typical CI workflow
+-------------------
+1. Create a base-branch worktree alongside the PR worktree
+2. Run babel_update.sh in the base worktree (extract from BASE source)
+3. Record baseline:  python ... --count --translations-dir BASE_TREE > before.json
+4. Run babel_update.sh in the PR worktree (extract from PR source) starting
+   from the same pristine BASE translations
+5. Compare:  python ... --compare before.json [--report report.md]
+
+Comparing two babel_update outputs that started from the same BASE .po files
+isolates regressions caused by the PR's source diff from any pre-existing
+drift on the base branch.
+"""
+
+import argparse
+import json
+import re
+import subprocess
+import sys
+from pathlib import Path
+from typing import Optional
+
+DEFAULT_TRANSLATIONS_DIR = (
+    Path(__file__).resolve().parent.parent.parent / "superset" / "translations"
+)
+
+# English .po files use empty msgstr by convention (source language == target),
+# so they always show 0 translated entries and should not be checked.
+SKIP_LANGS = {"en"}
+
+
+def count_translated(po_file: Path) -> int:
+    """Return the number of non-fuzzy translated messages in a .po file.
+
+    Raises:
+        subprocess.CalledProcessError: if ``msgfmt`` fails (e.g. malformed
+            .po file). The regression check exists to surface translation
+            problems, so a silent zero would defeat its purpose — let the
+            caller see a malformed file as a hard failure.
+    """
+    import shutil  # noqa: PLC0415
+
+    msgfmt = shutil.which("msgfmt") or "msgfmt"
+    result = subprocess.run(  # noqa: S603
+        [msgfmt, "--statistics", "-o", "/dev/null", str(po_file)],
+        capture_output=True,
+        text=True,
+        check=True,
+    )
+    # stderr: "123 translated messages, 4 fuzzy translations, 56 untranslated messages."
+    match = re.search(r"(\d+) translated message", result.stderr)
+    if not match:
+        raise RuntimeError(
+            f"Could not parse msgfmt --statistics output for {po_file}: "
+            f"{result.stderr!r}"
+        )
+    return int(match.group(1))
+
+
+def get_counts(translations_dir: Path) -> dict[str, int]:
+    counts: dict[str, int] = {}
+    for po_file in sorted(translations_dir.glob("*/LC_MESSAGES/messages.po")):
+        lang = po_file.parent.parent.name
+        if lang in SKIP_LANGS:
+            continue
+        try:
+            counts[lang] = count_translated(po_file)
+        except (subprocess.CalledProcessError, RuntimeError) as exc:
+            # A malformed .po file (msgfmt non-zero exit, or stderr we
+            # can't parse) is a real problem worth seeing, but it shouldn't
+            # take the whole regression check down with it — that would
+            # hide every other language's status. Skip and warn instead;
+            # the missing lang will not appear in the comparison output.
+            print(
+                f"WARNING: skipping {lang} — {po_file} could not be counted: {exc}",
+                file=sys.stderr,
+            )
+    return counts
+
+
+def build_regression_report(regressions: list[tuple[str, int, int]]) -> str:
+    """Build a markdown report for posting as a PR comment."""
+    rows = "\n".join(
+        f"| `{lang}` | {b} | {a} | -{b - a} |" for lang, b, a in regressions
+    )
+    affected = ", ".join(f"`{lang}`" for lang, _, _ in regressions)
+    return (
+        "## ⚠️ Translation Regression Detected\n\n"
+        f"This PR causes existing translations to become fuzzy or be removed "
+        f"in {affected}. Please fix the affected `.po` files before merging.\n\n"
+        "| Language | Before | After | Lost |\n"
+        "|----------|-------:|------:|-----:|\n"
+        f"{rows}\n\n"
+        "### How to fix\n\n"
+        "**1. Install dependencies** (if not already set up):\n\n"
+        "```bash\n"
+        "pip install -r superset/translations/requirements.txt\n"
+        "sudo apt-get install gettext   # or: brew install gettext\n"
+        "```\n\n"
+        "**2. Re-extract strings and sync `.po` files:**\n\n"
+        "```bash\n"
+        "./scripts/translations/babel_update.sh\n"
+        "```\n\n"
+        "This rewrites `superset/translations/messages.pot` from the current "
+        "source files and merges the changes into every `.po` file. Strings "
+        "whose `msgid` changed will be marked `#, fuzzy`.\n\n"
+        f"**3. Resolve the fuzzy entries** in the affected language files "
+        f"({affected}):\n\n"
+        "```bash\n"
+        "grep -n '#, fuzzy' superset/translations/<lang>/LC_MESSAGES/messages.po\n"
+        "```\n\n"
+        "For each fuzzy entry, either rewrite the `msgstr` to match the new "
+        "string and remove the `#, fuzzy` line, or clear the `msgstr` to "
+        '`""` if you cannot provide a translation.\n\n'
+        "**4. Commit your changes to the `.po` files.**\n"
+    )
+
+
+def cmd_count(translations_dir: Path) -> None:
+    counts = get_counts(translations_dir)
+    print(json.dumps(counts, indent=2))
+
+
+def cmd_compare(
+    before_path: str,
+    translations_dir: Path,
+    report_path: Optional[str] = None,
+) -> None:
+    with open(before_path) as f:
+        before: dict[str, int] = json.load(f)
+
+    after = get_counts(translations_dir)
+
+    regressions: list[tuple[str, int, int]] = []
+    for lang, before_count in sorted(before.items()):
+        after_count = after.get(lang, 0)
+        if after_count < before_count:
+            regressions.append((lang, before_count, after_count))
+
+    if regressions:
+        print("Translation regression detected!\n")
+        for lang, b, a in regressions:
+            lost = b - a
+            print(f"  {lang}: {b} -> {a}  (-{lost} string(s) became fuzzy or removed)")
+        print(
+            "\nStrings renamed or deleted by this PR invalidated existing translations."
+        )
+        print(
+            "Update the affected .po files to restore the lost entries before merging."
+        )
+        if report_path:
+            Path(report_path).write_text(
+                build_regression_report(regressions), encoding="utf-8"
+            )
+        sys.exit(1)
+
+    # All good — print a summary so it's easy to read in CI logs.
+    print("No translation regressions.\n")
+    for lang in sorted(after):
+        b = before.get(lang, 0)
+        a = after[lang]
+        if a > b:
+            delta = f"+{a - b}"
+        elif a == b:
+            delta = "no change"
+        else:
+            delta = f"-{b - a}"
+        print(f"  {lang}: {b} -> {a}  ({delta})")
+
+
+def main() -> None:
+    parser = argparse.ArgumentParser(
+        description="Check for translation regressions in .po files."
+    )
+    action = parser.add_mutually_exclusive_group(required=True)
+    action.add_argument(
+        "--count",
+        action="store_true",
+        help="Output translation counts per language as JSON.",
+    )
+    action.add_argument(
+        "--compare",
+        metavar="BEFORE_JSON",
+        help="Compare current counts against a baseline JSON file.",
+    )
+    parser.add_argument(
+        "--report",
+        metavar="REPORT_MD",
+        help="When --compare detects regressions, write a markdown report here.",
+    )
+    parser.add_argument(
+        "--translations-dir",
+        type=Path,
+        default=DEFAULT_TRANSLATIONS_DIR,
+        help=(
+            "Path to the translations directory containing per-language "
+            "LC_MESSAGES/messages.po files (default: <repo>/superset/translations)."
+        ),
+    )
+    args = parser.parse_args()
+
+    if args.count:
+        cmd_count(args.translations_dir)
+    else:
+        cmd_compare(args.compare, args.translations_dir, args.report)
+
+
+if __name__ == "__main__":
+    main()

superset-core/pyproject.toml

@@ -48,7 +48,7 @@ dependencies = [
     "pydantic>=2.8.0",
     "sqlalchemy>=1.4.0,<2.0",
     "sqlalchemy-utils>=0.38.0, <0.43", # expanding lowerbound to work with pydoris
-    "sqlglot>=28.10.0, <29",
+    "sqlglot>=30.8.0, <31",
     "typing-extensions>=4.0.0",
 ]
 

superset-frontend/cypress-base/cypress/e2e/dashboard/_skip.controls.test.ts

@@ -1,100 +0,0 @@
-/**
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-import {
-  waitForChartLoad,
-  ChartSpec,
-  getChartAliasesBySpec,
-} from 'cypress/utils';
-import { WORLD_HEALTH_DASHBOARD } from 'cypress/utils/urls';
-import { WORLD_HEALTH_CHARTS } from './utils';
-import { isLegacyResponse } from '../../utils/vizPlugins';
-
-describe('Dashboard top-level controls', () => {
-  beforeEach(() => {
-    cy.visit(WORLD_HEALTH_DASHBOARD);
-  });
-
-  // flaky test - query completes before assertion
-  it.skip('should allow chart level refresh', () => {
-    const mapSpec = WORLD_HEALTH_CHARTS.find(
-      ({ viz }) => viz === 'world_map',
-    ) as ChartSpec;
-    waitForChartLoad(mapSpec).then(gridComponent => {
-      const mapId = gridComponent.attr('data-test-chart-id');
-      cy.get('[data-test="grid-container"]').find('.world_map').should('exist');
-      cy.get(`#slice_${mapId}-controls`).click();
-      cy.get(`[data-test="slice_${mapId}-menu"]`)
-        .find('[data-test="refresh-chart-menu-item"]')
-        .click({ force: true });
-      // likely cause for flakiness:
-      // The query completes before this assertion happens.
-      // Solution: pause the network before clicking, assert, then unpause network.
-      cy.get('[data-test="refresh-chart-menu-item"]').should(
-        'have.class',
-        'ant-dropdown-menu-item-disabled',
-      );
-      waitForChartLoad(mapSpec);
-      cy.get('[data-test="refresh-chart-menu-item"]').should(
-        'not.have.class',
-        'ant-dropdown-menu-item-disabled',
-      );
-    });
-  });
-
-  it('should allow dashboard level force refresh', () => {
-    // when charts are not start loading, for example, under a secondary tab,
-    // should allow force refresh
-    WORLD_HEALTH_CHARTS.forEach(waitForChartLoad);
-    getChartAliasesBySpec(WORLD_HEALTH_CHARTS).then(aliases => {
-      cy.get('[aria-label="ellipsis"]').click();
-      cy.get('[data-test="refresh-dashboard-menu-item"]').should(
-        'not.have.class',
-        'ant-dropdown-menu-item-disabled',
-      );
-
-      cy.get('[data-test="refresh-dashboard-menu-item"]').click({
-        force: true,
-      });
-      cy.get('[data-test="refresh-dashboard-menu-item"]').should(
-        'have.class',
-        'ant-dropdown-menu-item-disabled',
-      );
-
-      // wait all charts force refreshed.
-
-      cy.wait(aliases).then(xhrs => {
-        xhrs.forEach(async ({ response, request }) => {
-          const responseBody = response?.body;
-          const isCached = isLegacyResponse(responseBody)
-            ? responseBody.is_cached
-            : responseBody.result[0].is_cached;
-          // request url should indicate force-refresh operation
-          expect(request.url).to.have.string('force=true');
-          // is_cached in response should be false
-          expect(isCached).to.equal(false);
-        });
-      });
-    });
-    cy.get('[aria-label="ellipsis"]').click();
-    cy.get('[data-test="refresh-dashboard-menu-item"]').and(
-      'not.have.class',
-      'ant-dropdown-menu-item-disabled',
-    );
-  });
-});

superset-frontend/cypress-base/cypress/e2e/dashboard/_skip.horizontalFilterBar.test.ts

@@ -1,292 +0,0 @@
-/**
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-import { nativeFilters } from 'cypress/support/directories';
-
-import {
-  addCountryNameFilter,
-  applyNativeFilterValueWithIndex,
-  enterNativeFilterEditModal,
-  inputNativeFilterDefaultValue,
-  saveNativeFilterSettings,
-  validateFilterNameOnDashboard,
-  testItems,
-  interceptFilterState,
-} from './utils';
-import {
-  prepareDashboardFilters,
-  SAMPLE_CHART,
-  visitDashboard,
-} from './shared_dashboard_functions';
-
-function openMoreFilters(waitFilterState = true) {
-  interceptFilterState();
-  // Wait for the dropdown button to appear when filters are overflowed
-  // The button only appears when there are overflowed filters
-  cy.getBySel('dropdown-container-btn', { timeout: 10000 })
-    .should('exist')
-    .should('be.visible')
-    .click({ force: true });
-
-  if (waitFilterState) {
-    cy.wait('@postFilterState');
-  }
-}
-
-function openVerticalFilterBar() {
-  cy.getBySel('dashboard-filters-panel').should('exist');
-  cy.getBySel('filter-bar__expand-button').click();
-}
-
-function setFilterBarOrientation(orientation: 'vertical' | 'horizontal') {
-  cy.getBySel('filterbar-orientation-icon').click();
-  cy.wait(250);
-  cy.get('.filter-bar-orientation-submenu')
-    .contains('Orientation of filter bar')
-    .should('exist')
-    .trigger('mouseover');
-
-  if (orientation === 'vertical') {
-    cy.get('.ant-dropdown-menu-item-selected')
-      .contains('Horizontal (Top)')
-      .should('exist');
-    cy.get('.ant-dropdown-menu-item').contains('Vertical (Left)').click();
-    cy.getBySel('dashboard-filters-panel').should('exist');
-  } else {
-    cy.get('.ant-dropdown-menu-item-selected')
-      .contains('Vertical (Left)')
-      .should('exist');
-    cy.get('.ant-dropdown-menu-item').contains('Horizontal (Top)').click();
-    cy.getBySel('loading-indicator').should('exist');
-    cy.getBySel('filter-bar').should('exist');
-    cy.getBySel('dashboard-filters-panel').should('not.exist');
-  }
-}
-
-describe('Horizontal FilterBar', () => {
-  it('should go from vertical to horizontal and the opposite', () => {
-    visitDashboard();
-    openVerticalFilterBar();
-    setFilterBarOrientation('horizontal');
-    setFilterBarOrientation('vertical');
-  });
-
-  it('should show all default actions in horizontal mode', () => {
-    visitDashboard();
-    openVerticalFilterBar();
-    setFilterBarOrientation('horizontal');
-    cy.getBySel('horizontal-filterbar-empty')
-      .contains('No filters are currently added to this dashboard.')
-      .should('exist');
-    cy.get(nativeFilters.filtersPanel.filterGear).click({
-      force: true,
-    });
-    cy.get('.ant-dropdown-menu').should('be.visible');
-    cy.getBySel('filter-bar__create-filter').should('exist');
-    cy.getBySel('filterbar-action-buttons').should('exist');
-  });
-
-  it('should stay in horizontal mode when reloading', () => {
-    visitDashboard();
-    openVerticalFilterBar();
-    setFilterBarOrientation('horizontal');
-    cy.reload();
-    cy.getBySel('dashboard-filters-panel').should('not.exist');
-  });
-
-  it('should show all filters in available space on load', () => {
-    prepareDashboardFilters([
-      { name: 'test_1', column: 'country_name', datasetId: 2 },
-      { name: 'test_2', column: 'country_code', datasetId: 2 },
-      { name: 'test_3', column: 'region', datasetId: 2 },
-    ]);
-    setFilterBarOrientation('horizontal');
-    cy.get('.filter-item-wrapper').should('have.length', 3);
-  });
-
-  it('should show "more filters" on window resizing up and down', () => {
-    // Use 4 filters with unique columns to ensure overflow testing while allowing all to fit at large viewport
-    prepareDashboardFilters([
-      { name: 'Country', column: 'country_name', datasetId: 2 },
-      { name: 'Code', column: 'country_code', datasetId: 2 },
-      { name: 'Region', column: 'region', datasetId: 2 },
-      { name: 'Year', column: 'year', datasetId: 2 },
-    ]);
-    setFilterBarOrientation('horizontal');
-
-    // At full width, check how many filters are visible in main bar
-    cy.get('.filter-item-wrapper').then($items => {
-      cy.log(`Found ${$items.length} filter items at full width`);
-    });
-
-    // Resize to force overflow
-    cy.viewport(500, 1024);
-    cy.wait(500); // Allow layout to stabilize after viewport change
-
-    // Should have some filters visible and dropdown button present
-    cy.get('.filter-item-wrapper').should('have.length.lessThan', 4);
-    cy.getBySel('dropdown-container-btn').should('exist');
-
-    // Open more filters and verify all are accessible in the dropdown
-    openMoreFilters(false);
-    // Check that the dropdown content contains filters
-    cy.getBySel('dropdown-content').within(() => {
-      cy.getBySel('form-item-value').should('have.length.greaterThan', 0);
-    });
-
-    // Close the dropdown
-    cy.getBySel('filter-bar').click();
-
-    // Test with medium viewport
-    cy.viewport(800, 1024);
-    cy.wait(500); // Allow layout to stabilize after viewport change
-
-    // May or may not have overflow at this size - test adaptively
-    cy.get('body').then($body => {
-      if ($body.find('[data-test="dropdown-container-btn"]').length > 0) {
-        openMoreFilters(false);
-        cy.getBySel('dropdown-content').within(() => {
-          cy.getBySel('form-item-value').should('have.length.greaterThan', 0);
-        });
-        cy.getBySel('filter-bar').click(); // Close dropdown
-      }
-    });
-
-    // At large viewport, all filters should fit
-    cy.viewport(1300, 1024);
-    cy.wait(500); // Allow layout to stabilize after viewport change
-    cy.get('.filter-item-wrapper').then($items => {
-      cy.log(`Found ${$items.length} filter items at large width`);
-      // Just verify we have some filters, don't assert exact count
-      expect($items.length).to.be.greaterThan(0);
-    });
-    cy.getBySel('dropdown-container-btn').should('not.exist');
-  });
-
-  it('should show "more filters" and scroll', () => {
-    prepareDashboardFilters([
-      { name: 'test_1', column: 'country_name', datasetId: 2 },
-      { name: 'test_2', column: 'country_code', datasetId: 2 },
-      { name: 'test_3', column: 'region', datasetId: 2 },
-      { name: 'test_4', column: 'year', datasetId: 2 },
-      { name: 'test_5', column: 'country_name', datasetId: 2 },
-      { name: 'test_6', column: 'country_code', datasetId: 2 },
-      { name: 'test_7', column: 'region', datasetId: 2 },
-      { name: 'test_8', column: 'year', datasetId: 2 },
-      { name: 'test_9', column: 'country_name', datasetId: 2 },
-      { name: 'test_10', column: 'country_code', datasetId: 2 },
-      { name: 'test_11', column: 'region', datasetId: 2 },
-      { name: 'test_12', column: 'year', datasetId: 2 },
-    ]);
-    setFilterBarOrientation('horizontal');
-
-    cy.get('.filter-item-wrapper').should('have.length', 4);
-    openMoreFilters();
-    cy.getBySel('form-item-value').should('have.length', 12);
-    cy.getBySel('filter-control-name').contains('test_3').should('be.visible');
-    cy.getBySel('filter-control-name')
-      .contains('test_12')
-      .should('not.be.visible');
-    cy.getBySel('filter-control-name').contains('test_12').scrollIntoView();
-    cy.getBySel('filter-control-name').contains('test_12').should('be.visible');
-  });
-
-  it('should display newly added filter', () => {
-    visitDashboard();
-    openVerticalFilterBar();
-    setFilterBarOrientation('horizontal');
-
-    enterNativeFilterEditModal(false);
-    addCountryNameFilter();
-    saveNativeFilterSettings([]);
-    validateFilterNameOnDashboard(testItems.topTenChart.filterColumn);
-  });
-
-  it.skip('should spot changes in "more filters" and apply their values', () => {
-    cy.intercept(`**/api/v1/chart/data?form_data=**`).as('chart');
-    prepareDashboardFilters([
-      { name: 'test_1', column: 'country_name', datasetId: 2 },
-      { name: 'test_2', column: 'country_code', datasetId: 2 },
-      { name: 'test_3', column: 'region', datasetId: 2 },
-      { name: 'test_4', column: 'year', datasetId: 2 },
-      { name: 'test_5', column: 'country_name', datasetId: 2 },
-      { name: 'test_6', column: 'country_code', datasetId: 2 },
-      { name: 'test_7', column: 'region', datasetId: 2 },
-      { name: 'test_8', column: 'year', datasetId: 2 },
-      { name: 'test_9', column: 'country_name', datasetId: 2 },
-      { name: 'test_10', column: 'country_code', datasetId: 2 },
-      { name: 'test_11', column: 'region', datasetId: 2 },
-      { name: 'test_12', column: 'year', datasetId: 2 },
-    ]);
-    setFilterBarOrientation('horizontal');
-    openMoreFilters();
-    applyNativeFilterValueWithIndex(8, testItems.filterDefaultValue);
-    cy.get(nativeFilters.applyFilter).click({ force: true });
-    cy.wait('@chart');
-    cy.get('.ant-scroll-number.ant-badge-count').should(
-      'have.attr',
-      'title',
-      '1',
-    );
-  });
-
-  it.skip('should focus filter and open "more filters" programmatically', () => {
-    prepareDashboardFilters([
-      { name: 'test_1', column: 'country_name', datasetId: 2 },
-      { name: 'test_2', column: 'country_code', datasetId: 2 },
-      { name: 'test_3', column: 'region', datasetId: 2 },
-      { name: 'test_4', column: 'year', datasetId: 2 },
-      { name: 'test_5', column: 'country_name', datasetId: 2 },
-      { name: 'test_6', column: 'country_code', datasetId: 2 },
-      { name: 'test_7', column: 'region', datasetId: 2 },
-      { name: 'test_8', column: 'year', datasetId: 2 },
-      { name: 'test_9', column: 'country_name', datasetId: 2 },
-      { name: 'test_10', column: 'country_code', datasetId: 2 },
-      { name: 'test_11', column: 'region', datasetId: 2 },
-      { name: 'test_12', column: 'year', datasetId: 2 },
-    ]);
-    setFilterBarOrientation('horizontal');
-    openMoreFilters();
-    applyNativeFilterValueWithIndex(8, testItems.filterDefaultValue);
-    cy.get(nativeFilters.applyFilter).click({ force: true });
-    cy.getBySel('slice-header').within(() => {
-      cy.get('.filter-counts').trigger('mouseover');
-    });
-    cy.getBySel('filter-status-popover').contains('test_9').click();
-    cy.getBySel('dropdown-content').should('be.visible');
-    cy.get('.ant-select-focused').should('be.visible');
-  });
-
-  it.skip('should show tag count and one plain tag on focus and only count on blur in select ', () => {
-    prepareDashboardFilters([
-      { name: 'test_1', column: 'country_name', datasetId: 2 },
-    ]);
-    setFilterBarOrientation('horizontal');
-    enterNativeFilterEditModal();
-    inputNativeFilterDefaultValue('Albania');
-    cy.get('.ant-select-selection-search-input').clear({ force: true });
-    inputNativeFilterDefaultValue('Algeria', true);
-    saveNativeFilterSettings([SAMPLE_CHART]);
-    cy.getBySel('filter-bar').within(() => {
-      cy.get(nativeFilters.filterItem).contains('Albania').should('be.visible');
-      cy.get(nativeFilters.filterItem).contains('+ 1 ...').should('be.visible');
-      cy.get('.ant-select-selection-search-input').click();
-      cy.get(nativeFilters.filterItem).contains('+ 2 ...').should('be.visible');
-    });
-  });
-});

superset-frontend/cypress-base/cypress/e2e/dashboard/_skip.key_value.test.ts

@@ -1,53 +0,0 @@
-/**
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-import qs from 'querystringify';
-import { waitForChartLoad } from 'cypress/utils';
-import { WORLD_HEALTH_DASHBOARD } from 'cypress/utils/urls';
-import { WORLD_HEALTH_CHARTS } from './utils';
-
-interface QueryString {
-  native_filters_key: string;
-}
-
-describe('nativefilter url param key', () => {
-  // const urlParams = { param1: '123', param2: 'abc' };
-
-  let initialFilterKey: string;
-  it('should have cachekey in nativefilter param', () => {
-    // things in `before` will not retry and the `waitForChartLoad` check is
-    // especially flaky and may need more retries
-    cy.visit(WORLD_HEALTH_DASHBOARD);
-    WORLD_HEALTH_CHARTS.forEach(waitForChartLoad);
-    cy.wait(1000); // wait for key to be published (debounced)
-    cy.location().then(loc => {
-      const queryParams = qs.parse(loc.search) as QueryString;
-      expect(typeof queryParams.native_filters_key).eq('string');
-    });
-  });
-
-  it('should have different key when page reloads', () => {
-    cy.visit(WORLD_HEALTH_DASHBOARD);
-    WORLD_HEALTH_CHARTS.forEach(waitForChartLoad);
-    cy.wait(1000); // wait for key to be published (debounced)
-    cy.location().then(loc => {
-      const queryParams = qs.parse(loc.search) as QueryString;
-      expect(queryParams.native_filters_key).not.equal(initialFilterKey);
-    });
-  });
-});

superset-frontend/cypress-base/cypress/e2e/dashboard/_skip.load.test.ts

@@ -1,51 +0,0 @@
-/**
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-import { WORLD_HEALTH_DASHBOARD } from 'cypress/utils/urls';
-import { waitForChartLoad } from 'cypress/utils';
-import { WORLD_HEALTH_CHARTS, interceptLog } from './utils';
-
-describe('Dashboard load', () => {
-  it('should load dashboard', () => {
-    cy.visit(WORLD_HEALTH_DASHBOARD);
-    WORLD_HEALTH_CHARTS.forEach(waitForChartLoad);
-  });
-
-  it('should load in edit mode', () => {
-    cy.visit(`${WORLD_HEALTH_DASHBOARD}?edit=true&standalone=true`);
-    cy.getBySel('discard-changes-button').should('be.visible');
-  });
-
-  it('should load in standalone mode', () => {
-    cy.visit(`${WORLD_HEALTH_DASHBOARD}?edit=true&standalone=true`);
-    cy.get('#app-menu').should('not.exist');
-  });
-
-  it('should load in edit/standalone mode', () => {
-    cy.visit(`${WORLD_HEALTH_DASHBOARD}?edit=true&standalone=true`);
-    cy.getBySel('discard-changes-button').should('be.visible');
-    cy.get('#app-menu').should('not.exist');
-  });
-
-  // TODO flaky test. skipping to unblock CI
-  it.skip('should send log data', () => {
-    interceptLog();
-    cy.visit(WORLD_HEALTH_DASHBOARD);
-    cy.wait('@logs', { timeout: 15000 });
-  });
-});

superset-frontend/cypress-base/cypress/e2e/dashboard/_skip.nativeFilters.noInitState.test.ts

@@ -1,385 +0,0 @@
-/**
- *
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-import qs from 'querystring';
-import {
-  dashboardView,
-  nativeFilters,
-  dataTestChartName,
-} from 'cypress/support/directories';
-
-import {
-  addCountryNameFilter,
-  applyAdvancedTimeRangeFilterOnDashboard,
-  applyNativeFilterValueWithIndex,
-  cancelNativeFilterSettings,
-  deleteNativeFilter,
-  enterNativeFilterEditModal,
-  fillNativeFilterForm,
-  inputNativeFilterDefaultValue,
-  saveNativeFilterSettings,
-  undoDeleteNativeFilter,
-  validateFilterContentOnDashboard,
-  validateFilterNameOnDashboard,
-  testItems,
-  WORLD_HEALTH_CHARTS,
-} from './utils';
-import {
-  prepareDashboardFilters,
-  SAMPLE_CHART,
-  visitDashboard,
-} from './shared_dashboard_functions';
-
-// function selectFilter(index: number) {
-//   cy.get("[data-test='filter-title-container'] [draggable='true']")
-//     .eq(index)
-//     .click();
-// }
-
-// function closeFilterModal() {
-//   cy.get('body').then($body => {
-//     if ($body.find('[data-test="native-filter-modal-cancel-button"]').length) {
-//       cy.getBySel('native-filter-modal-cancel-button').click();
-//     }
-//   });
-// }
-
-describe('Native filters', () => {
-  describe('Nativefilters initial state not required', () => {
-    it("User can check 'Filter has default value'", () => {
-      prepareDashboardFilters([
-        { name: 'country_name', column: 'country_name', datasetId: 2 },
-      ]);
-      enterNativeFilterEditModal();
-      inputNativeFilterDefaultValue(testItems.filterDefaultValue);
-    });
-
-    it('User can add a new native filter', () => {
-      prepareDashboardFilters([]);
-
-      let filterKey: string;
-      const removeFirstChar = (search: string) =>
-        search.split('').slice(1, search.length).join('');
-
-      cy.location().then(loc => {
-        cy.url().should('contain', 'native_filters_key');
-        const queryParams = qs.parse(removeFirstChar(loc.search));
-        filterKey = queryParams.native_filters_key as string;
-        expect(typeof filterKey).eq('string');
-      });
-      enterNativeFilterEditModal();
-      addCountryNameFilter();
-      saveNativeFilterSettings([SAMPLE_CHART]);
-      cy.location().then(loc => {
-        cy.url().should('contain', 'native_filters_key');
-        const queryParams = qs.parse(removeFirstChar(loc.search));
-        const newfilterKey = queryParams.native_filters_key;
-        expect(newfilterKey).eq(filterKey);
-      });
-      cy.get(nativeFilters.modal.container).should('not.exist');
-    });
-
-    it('User can restore a deleted native filter', () => {
-      prepareDashboardFilters([
-        { name: 'country_code', column: 'country_code', datasetId: 2 },
-      ]);
-      enterNativeFilterEditModal();
-      cy.get(nativeFilters.filtersList.removeIcon).first().click();
-      cy.get('[data-test="restore-filter-button"]')
-        .should('be.visible')
-        .click();
-      cy.get(nativeFilters.modal.container)
-        .find(nativeFilters.filtersPanel.filterName)
-        .should(
-          'have.attr',
-          'value',
-          testItems.topTenChart.filterColumnCountryCode,
-        );
-    });
-
-    it('User can create a time grain filter', () => {
-      prepareDashboardFilters([]);
-      enterNativeFilterEditModal();
-      fillNativeFilterForm(
-        testItems.filterType.timeGrain,
-        testItems.filterType.timeGrain,
-        testItems.datasetForNativeFilter,
-      );
-      saveNativeFilterSettings([SAMPLE_CHART]);
-      applyNativeFilterValueWithIndex(0, testItems.filterTimeGrain);
-      cy.get(nativeFilters.applyFilter).click();
-      cy.url().then(u => {
-        const ur = new URL(u);
-        expect(ur.search).to.include('native_filters');
-      });
-      validateFilterNameOnDashboard(testItems.filterType.timeGrain);
-      validateFilterContentOnDashboard(testItems.filterTimeGrain);
-    });
-
-    it.skip('User can create a time range filter', () => {
-      enterNativeFilterEditModal();
-      fillNativeFilterForm(
-        testItems.filterType.timeRange,
-        testItems.filterType.timeRange,
-      );
-      saveNativeFilterSettings(WORLD_HEALTH_CHARTS);
-      cy.get(dashboardView.salesDashboardSpecific.vehicleSalesFilterTimeRange)
-        .should('be.visible')
-        .click();
-      applyAdvancedTimeRangeFilterOnDashboard('2005-12-17', '2006-12-17');
-      cy.url().then(u => {
-        const ur = new URL(u);
-        expect(ur.search).to.include('native_filters');
-      });
-      validateFilterNameOnDashboard(testItems.filterType.timeRange);
-      cy.get(nativeFilters.filterFromDashboardView.timeRangeFilterContent)
-        .contains('2005-12-17')
-        .should('be.visible');
-    });
-
-    it.skip('User can create a time column filter', () => {
-      enterNativeFilterEditModal();
-      fillNativeFilterForm(
-        testItems.filterType.timeColumn,
-        testItems.filterType.timeColumn,
-        testItems.datasetForNativeFilter,
-      );
-      saveNativeFilterSettings(WORLD_HEALTH_CHARTS);
-      cy.intercept(`**/api/v1/chart/data?form_data=**`).as('chart');
-      cy.get(nativeFilters.modal.container).should('not.exist');
-      // assert that native filter is created
-      validateFilterNameOnDashboard(testItems.filterType.timeColumn);
-      applyNativeFilterValueWithIndex(
-        0,
-        testItems.topTenChart.filterColumnYear,
-      );
-      cy.get(nativeFilters.applyFilter).click({ force: true });
-      cy.wait('@chart');
-      validateFilterContentOnDashboard(testItems.topTenChart.filterColumnYear);
-    });
-
-    describe.only('Numerical Range Filter - Display Modes', () => {
-      beforeEach(() => {
-        visitDashboard();
-      });
-
-      const expandFilterConfiguration = () => {
-        cy.get('.ant-collapse-header')
-          .contains('Filter Configuration')
-          .should('be.visible')
-          .then($header => {
-            cy.wrap($header)
-              .closest('.ant-collapse-item')
-              .invoke('hasClass', 'ant-collapse-item-active')
-              .then(isExpanded => {
-                if (!isExpanded) cy.wrap($header).click();
-              });
-          });
-
-        cy.get('.ant-collapse-content-box').should('be.visible');
-      };
-
-      const selectRangeTypeOption = (label: string) => {
-        cy.contains('Range Type')
-          .should('be.visible')
-          .closest('.ant-form-item')
-          .within(() => {
-            cy.get('.ant-select-selector').click();
-          });
-
-        cy.get('.ant-select-dropdown:visible')
-          .contains('.ant-select-item-option', label)
-          .click();
-      };
-
-      const applyAndAssertInputs = (from: string, to: string) => {
-        // Set 'from' input
-        cy.get('[data-test="range-filter-from-input"]').clear();
-        cy.get('[data-test="range-filter-from-input"]').type(from);
-        cy.get('[data-test="range-filter-from-input"]').blur();
-
-        // Set 'to' input
-        cy.get('[data-test="range-filter-to-input"]').clear();
-        cy.get('[data-test="range-filter-to-input"]').type(to);
-        cy.get('[data-test="range-filter-to-input"]').blur();
-
-        // Assert values without chaining after .invoke()
-        cy.get('[data-test="range-filter-from-input"]')
-          .invoke('val')
-          .then(val => {
-            expect(val).to.equal(from);
-          });
-
-        cy.get('[data-test="range-filter-to-input"]')
-          .invoke('val')
-          .then(val => {
-            expect(val).to.equal(to);
-          });
-      };
-
-      it('User can create a numerical range filter with "Range Inputs" display mode', () => {
-        enterNativeFilterEditModal(false);
-
-        fillNativeFilterForm(
-          testItems.filterType.numerical,
-          testItems.filterNumericalColumn,
-          testItems.datasetForNativeFilter,
-          testItems.filterNumericalColumn,
-        );
-
-        expandFilterConfiguration();
-        selectRangeTypeOption('Range Inputs');
-
-        saveNativeFilterSettings([]);
-        cy.wait(500); // allow filter to mount
-
-        applyAndAssertInputs('40', '70');
-      });
-
-      it('User can change the display mode to "Slider"', () => {
-        enterNativeFilterEditModal(false);
-
-        fillNativeFilterForm(
-          testItems.filterType.numerical,
-          testItems.filterNumericalColumn,
-          testItems.datasetForNativeFilter,
-          testItems.filterNumericalColumn,
-        );
-
-        expandFilterConfiguration();
-
-        cy.contains('Range Type')
-          .should('be.visible')
-          .closest('.ant-form-item')
-          .within(() => {
-            cy.get('.ant-select-selector').click({ force: true });
-          });
-
-        cy.get('.ant-select-dropdown:visible .ant-select-item-option')
-          .contains(/^Slider$/)
-          .click({ force: true });
-
-        cy.get('.ant-select-selector').should('contain.text', 'Slider');
-
-        saveNativeFilterSettings([]);
-
-        cy.get('.ant-slider', { timeout: 10000 }).should('be.visible');
-
-        cy.get('[data-test="range-filter-from-input"]', {
-          timeout: 5000,
-        }).should('not.exist');
-        cy.get('[data-test="range-filter-to-input"]', { timeout: 5000 }).should(
-          'not.exist',
-        );
-      });
-
-      it('User can change the display mode to "Slider and range input"', () => {
-        enterNativeFilterEditModal(false);
-
-        // Re-create filter
-        fillNativeFilterForm(
-          testItems.filterType.numerical,
-          testItems.filterNumericalColumn,
-          testItems.datasetForNativeFilter,
-          testItems.filterNumericalColumn,
-        );
-
-        expandFilterConfiguration();
-        selectRangeTypeOption('Slider and range input');
-
-        saveNativeFilterSettings([]);
-        cy.wait(500);
-
-        applyAndAssertInputs('40', '70');
-      });
-    });
-
-    it('User can undo deleting a native filter', () => {
-      prepareDashboardFilters([
-        { name: 'country_name', column: 'country_name', datasetId: 2 },
-      ]);
-      enterNativeFilterEditModal();
-      undoDeleteNativeFilter();
-      cy.get(nativeFilters.modal.container)
-        .find(nativeFilters.filtersPanel.filterName)
-        .should('have.attr', 'value', testItems.topTenChart.filterColumn);
-    });
-
-    it('User can cancel changes in native filter', () => {
-      prepareDashboardFilters([
-        { name: 'country_name', column: 'country_name', datasetId: 2 },
-      ]);
-      enterNativeFilterEditModal();
-      cy.getBySel('filters-config-modal__name-input').type('|EDITED', {
-        force: true,
-      });
-      cancelNativeFilterSettings();
-      enterNativeFilterEditModal(false);
-      cy.get(nativeFilters.filtersList.removeIcon).first().click();
-      cy.contains('You have removed this filter.').should('be.visible');
-    });
-
-    it('User can create a value filter', () => {
-      visitDashboard();
-      enterNativeFilterEditModal(false);
-      addCountryNameFilter();
-      cy.get(nativeFilters.filtersPanel.filterTypeInput)
-        .find(nativeFilters.filtersPanel.filterTypeItem)
-        .should('have.text', testItems.filterType.value);
-      saveNativeFilterSettings([]);
-      validateFilterNameOnDashboard(testItems.topTenChart.filterColumn);
-    });
-
-    it('User can apply value filter with selected values', () => {
-      prepareDashboardFilters([
-        { name: 'country_name', column: 'country_name', datasetId: 2 },
-      ]);
-      applyNativeFilterValueWithIndex(0, testItems.filterDefaultValue);
-      cy.get(nativeFilters.applyFilter).click();
-      cy.get(dataTestChartName(testItems.topTenChart.name)).within(() => {
-        cy.contains(testItems.filterDefaultValue).should('be.visible');
-        cy.contains(testItems.filterOtherCountry).should('not.exist');
-      });
-    });
-
-    it('User can stop filtering when filter is removed', () => {
-      prepareDashboardFilters([
-        { name: 'country_name', column: 'country_name', datasetId: 2 },
-      ]);
-      enterNativeFilterEditModal();
-      inputNativeFilterDefaultValue(testItems.filterDefaultValue);
-      saveNativeFilterSettings([SAMPLE_CHART]);
-      cy.get(dataTestChartName(testItems.topTenChart.name)).within(() => {
-        cy.contains(testItems.filterDefaultValue).should('be.visible');
-        cy.contains(testItems.filterOtherCountry).should('not.exist');
-      });
-      cy.get(nativeFilters.filterItem)
-        .contains(testItems.filterDefaultValue)
-        .should('be.visible');
-      validateFilterNameOnDashboard(testItems.topTenChart.filterColumn);
-      enterNativeFilterEditModal(false);
-      deleteNativeFilter();
-      saveNativeFilterSettings([SAMPLE_CHART]);
-      cy.get(dataTestChartName(testItems.topTenChart.name)).within(() => {
-        cy.contains(testItems.filterDefaultValue).should('be.visible');
-        cy.contains(testItems.filterOtherCountry).should('be.visible');
-      });
-    });
-  });
-});

superset-frontend/cypress-base/cypress/e2e/dashboard/_skip.nativeFilters.test.ts

@@ -1,431 +0,0 @@
-/**
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-import {
-  nativeFilters,
-  exploreView,
-  dataTestChartName,
-} from 'cypress/support/directories';
-
-import {
-  addParentFilterWithValue,
-  applyNativeFilterValueWithIndex,
-  cancelNativeFilterSettings,
-  checkNativeFilterTooltip,
-  clickOnAddFilterInModal,
-  collapseFilterOnLeftPanel,
-  enterNativeFilterEditModal,
-  expandFilterOnLeftPanel,
-  getNativeFilterPlaceholderWithIndex,
-  inputNativeFilterDefaultValue,
-  saveNativeFilterSettings,
-  nativeFilterTooltips,
-  validateFilterContentOnDashboard,
-  valueNativeFilterOptions,
-  validateFilterNameOnDashboard,
-  testItems,
-} from './utils';
-import {
-  prepareDashboardFilters,
-  SAMPLE_CHART,
-  visitDashboard,
-} from './shared_dashboard_functions';
-
-function selectFilter(index: number) {
-  cy.get("[data-test='filter-title-container'] [role='tab']").eq(index).click();
-}
-
-function closeFilterModal() {
-  cy.get('body').then($body => {
-    if ($body.find('[data-test="native-filter-modal-cancel-button"]').length) {
-      cy.getBySel('native-filter-modal-cancel-button').click();
-    }
-  });
-}
-
-describe('Native filters', () => {
-  describe('Nativefilters tests initial state required', () => {
-    beforeEach(() => {
-      cy.createSampleDashboards([0]);
-    });
-
-    it.skip('Verify that default value is respected after revisit', () => {
-      prepareDashboardFilters([
-        { name: 'country_name', column: 'country_name' },
-      ]);
-      enterNativeFilterEditModal();
-      inputNativeFilterDefaultValue(testItems.filterDefaultValue);
-      saveNativeFilterSettings([SAMPLE_CHART]);
-      cy.get(nativeFilters.filterItem)
-        .contains(testItems.filterDefaultValue)
-        .should('be.visible');
-      cy.get(dataTestChartName(testItems.topTenChart.name)).within(() => {
-        cy.contains(testItems.filterDefaultValue).should('be.visible');
-        cy.contains(testItems.filterOtherCountry).should('not.exist');
-      });
-
-      // reload dashboard
-      cy.reload();
-      cy.get(dataTestChartName(testItems.topTenChart.name)).within(() => {
-        cy.contains(testItems.filterDefaultValue).should('be.visible');
-        cy.contains(testItems.filterOtherCountry).should('not.exist');
-      });
-      validateFilterContentOnDashboard(testItems.filterDefaultValue);
-    });
-
-    it('User can create parent filters using "Values are dependent on other filters"', () => {
-      prepareDashboardFilters([
-        { name: 'region', column: 'region' },
-        { name: 'country_name', column: 'country_name' },
-      ]);
-      enterNativeFilterEditModal();
-      selectFilter(1);
-      cy.get(nativeFilters.filterConfigurationSections.displayedSection).within(
-        () => {
-          cy.contains('Values are dependent on other filters')
-            .should('be.visible')
-            .click();
-        },
-      );
-      addParentFilterWithValue(0, testItems.topTenChart.filterColumnRegion);
-      saveNativeFilterSettings([SAMPLE_CHART]);
-      [
-        testItems.topTenChart.filterColumnRegion,
-        testItems.topTenChart.filterColumn,
-      ].forEach(it => {
-        cy.get(nativeFilters.filterFromDashboardView.filterName)
-          .contains(it)
-          .should('be.visible');
-      });
-      getNativeFilterPlaceholderWithIndex(1)
-        .invoke('text')
-        .should('equal', '214 options', { timeout: 20000 });
-      // apply first filter value and validate 2nd filter is depden on 1st filter.
-      applyNativeFilterValueWithIndex(0, 'North America');
-      getNativeFilterPlaceholderWithIndex(0).should('have.text', '3 options', {
-        timeout: 20000,
-      });
-    });
-
-    it('user can delete dependent filter', () => {
-      prepareDashboardFilters([
-        { name: 'region', column: 'region' },
-        { name: 'country_name', column: 'country_name' },
-      ]);
-      enterNativeFilterEditModal();
-      selectFilter(1);
-      cy.get(nativeFilters.filterConfigurationSections.displayedSection).within(
-        () => {
-          cy.contains('Values are dependent on other filters')
-            .should('be.visible')
-            .click();
-        },
-      );
-      addParentFilterWithValue(0, testItems.topTenChart.filterColumnRegion);
-      // remove year native filter to cause it disappears from parent filter input in global sales
-      cy.get(nativeFilters.modal.tabsList.removeTab)
-        .should('be.visible')
-        .first()
-        .click();
-      // make sure you are seeing global sales filter which had parent filter
-      cy.get(nativeFilters.modal.tabsList.filterItemsContainer)
-        .children()
-        .last()
-        .click();
-      //
-      cy.wait(1000);
-      cy.get(nativeFilters.filterConfigurationSections.displayedSection).within(
-        () => {
-          cy.contains('Values are dependent on other filters').should(
-            'not.exist',
-          );
-        },
-      );
-    });
-
-    it('user cannot create bi-directional dependencies between filters', () => {
-      prepareDashboardFilters([
-        { name: 'region', column: 'region' },
-        { name: 'country_name', column: 'country_name' },
-        { name: 'country_code', column: 'country_code' },
-        { name: 'year', column: 'year' },
-      ]);
-      enterNativeFilterEditModal();
-
-      // First, make country_name dependent on region
-      selectFilter(1);
-      cy.get(nativeFilters.filterConfigurationSections.displayedSection).within(
-        () => {
-          cy.contains('Values are dependent on other filters')
-            .should('be.visible')
-            .click();
-        },
-      );
-      addParentFilterWithValue(0, testItems.topTenChart.filterColumnRegion);
-
-      // Second, make country_code dependent on country_name
-      selectFilter(2);
-      cy.get(nativeFilters.filterConfigurationSections.displayedSection).within(
-        () => {
-          cy.contains('Values are dependent on other filters')
-            .should('be.visible')
-            .click();
-        },
-      );
-      addParentFilterWithValue(0, testItems.topTenChart.filterColumn);
-
-      // Now select region filter and try to add dependency
-      selectFilter(0);
-      cy.get(nativeFilters.filterConfigurationSections.displayedSection).within(
-        () => {
-          cy.contains('Values are dependent on other filters')
-            .should('be.visible')
-            .click();
-
-          // Verify that only 'year' is available as dependency for region
-          // 'country_name' and 'country_code' should not be available (would create circular dependency)
-          cy.get('input[aria-label^="Limit type"]').click({ force: true });
-          cy.get('[role="listbox"]').should('be.visible');
-          cy.get('[role="listbox"]').should('contain', 'year');
-          cy.get('[role="listbox"]').should('not.contain', 'country_name');
-          cy.get('[role="listbox"]').should('not.contain', 'country_code');
-          cy.get('[role="listbox"]').contains('year').click();
-        },
-      );
-    });
-
-    it('Dependent filter selects first item based on parent filter selection', () => {
-      prepareDashboardFilters([
-        { name: 'region', column: 'region' },
-        { name: 'country_name', column: 'country_name' },
-      ]);
-
-      enterNativeFilterEditModal();
-
-      selectFilter(0);
-      cy.get(nativeFilters.filterConfigurationSections.displayedSection).within(
-        () => {
-          cy.contains('Select first filter value by default')
-            .should('be.visible')
-            .click();
-        },
-      );
-      cy.get(nativeFilters.filterConfigurationSections.displayedSection).within(
-        () => {
-          cy.contains('Can select multiple values ')
-            .should('be.visible')
-            .click();
-        },
-      );
-
-      selectFilter(1);
-      cy.get(nativeFilters.filterConfigurationSections.displayedSection).within(
-        () => {
-          cy.contains('Values are dependent on other filters')
-            .should('be.visible')
-            .click();
-        },
-      );
-      cy.get(nativeFilters.filterConfigurationSections.displayedSection).within(
-        () => {
-          cy.contains('Can select multiple values ')
-            .should('be.visible')
-            .click();
-        },
-      );
-      addParentFilterWithValue(0, testItems.topTenChart.filterColumnRegion);
-      cy.get(nativeFilters.filterConfigurationSections.displayedSection).within(
-        () => {
-          cy.contains('Select first filter value by default')
-            .should('be.visible')
-            .click();
-        },
-      );
-
-      // cannot use saveNativeFilterSettings because there is a bug which
-      // sometimes does not allow charts to load when enabling the 'Select first filter value by default'
-      // to be saved when using dependent filters so,
-      // you reload the window.
-      cy.get(nativeFilters.modal.footer)
-        .contains('Save')
-        .should('be.visible')
-        .click({ force: true });
-
-      cy.get(nativeFilters.modal.container).should('not.exist');
-      cy.reload();
-
-      applyNativeFilterValueWithIndex(0, 'North America');
-
-      // Check that dependent filter auto-selects the first item
-      cy.get(nativeFilters.filterFromDashboardView.filterContent)
-        .eq(1)
-        .should('contain.text', 'Bermuda');
-    });
-
-    it('User can create filter depend on 2 other filters', () => {
-      prepareDashboardFilters([
-        { name: 'region', column: 'region' },
-        { name: 'country_name', column: 'country_name' },
-        { name: 'country_code', column: 'country_code' },
-      ]);
-      enterNativeFilterEditModal();
-      selectFilter(2);
-      cy.get(nativeFilters.filterConfigurationSections.displayedSection).within(
-        () => {
-          cy.contains('Values are dependent on other filters')
-            .should('be.visible')
-            .click();
-          cy.get(exploreView.controlPanel.addFieldValue).click();
-        },
-      );
-      // add value to the first input
-      addParentFilterWithValue(0, testItems.topTenChart.filterColumnRegion);
-      // add value to the second input
-      addParentFilterWithValue(1, testItems.topTenChart.filterColumn);
-      saveNativeFilterSettings([SAMPLE_CHART]);
-      // filters should be displayed in the left panel
-      [
-        testItems.topTenChart.filterColumnRegion,
-        testItems.topTenChart.filterColumn,
-        testItems.topTenChart.filterColumnCountryCode,
-      ].forEach(it => {
-        validateFilterNameOnDashboard(it);
-      });
-
-      // initially first filter shows 39 options
-      getNativeFilterPlaceholderWithIndex(0).should('have.text', '7 options');
-      // initially second filter shows 409 options
-      getNativeFilterPlaceholderWithIndex(1).should('have.text', '214 options');
-      // verify third filter shows 409 options
-      getNativeFilterPlaceholderWithIndex(2).should('have.text', '214 options');
-
-      // apply first filter value
-      applyNativeFilterValueWithIndex(0, 'North America');
-
-      // verify second filter shows 409 options available still
-      getNativeFilterPlaceholderWithIndex(0).should('have.text', '214 options');
-
-      // verify second filter shows 69 options available still
-      getNativeFilterPlaceholderWithIndex(1).should('have.text', '3 options');
-
-      // apply second filter value
-      applyNativeFilterValueWithIndex(1, 'United States');
-
-      // verify number of available options for third filter - should be decreased to only one
-      getNativeFilterPlaceholderWithIndex(0).should('have.text', '1 option');
-    });
-
-    it('User can remove parent filters', () => {
-      prepareDashboardFilters([
-        { name: 'region', column: 'region' },
-        { name: 'country_name', column: 'country_name' },
-      ]);
-      enterNativeFilterEditModal();
-      selectFilter(1);
-      // Select dependent option and auto use platform for genre
-      cy.get(nativeFilters.filterConfigurationSections.displayedSection).within(
-        () => {
-          cy.contains('Values are dependent on other filters')
-            .should('be.visible')
-            .click();
-        },
-      );
-      saveNativeFilterSettings([SAMPLE_CHART]);
-      enterNativeFilterEditModal(false);
-      cy.get(nativeFilters.modal.tabsList.removeTab)
-        .should('be.visible')
-        .first()
-        .click({
-          force: true,
-        });
-      saveNativeFilterSettings([SAMPLE_CHART]);
-      cy.get(dataTestChartName(testItems.topTenChart.name)).within(() => {
-        cy.contains(testItems.filterDefaultValue).should('be.visible');
-        cy.contains(testItems.filterOtherCountry).should('be.visible');
-      });
-    });
-  });
-
-  describe('Nativefilters basic interactions', () => {
-    before(() => {
-      visitDashboard();
-    });
-
-    beforeEach(() => {
-      cy.createSampleDashboards([0]);
-      closeFilterModal();
-    });
-
-    it('User can expand / retract native filter sidebar on a dashboard', () => {
-      expandFilterOnLeftPanel();
-      cy.get(nativeFilters.filtersPanel.filterGear).click({
-        force: true,
-      });
-      cy.get('.ant-dropdown-menu').should('be.visible');
-      cy.get(nativeFilters.filterFromDashboardView.createFilterButton).should(
-        'be.visible',
-      );
-      cy.get(nativeFilters.filterFromDashboardView.expand).should(
-        'not.be.visible',
-      );
-      collapseFilterOnLeftPanel();
-    });
-
-    it('User can enter filter edit pop-up by clicking on native filter edit icon', () => {
-      enterNativeFilterEditModal(false);
-    });
-
-    it('User can delete a native filter', () => {
-      enterNativeFilterEditModal(false);
-      cy.get(nativeFilters.filtersList.removeIcon).first().click();
-      cy.contains('Restore filter').should('not.exist', { timeout: 10000 });
-    });
-
-    it('User can cancel creating a new filter', () => {
-      enterNativeFilterEditModal(false);
-      cancelNativeFilterSettings();
-    });
-
-    it('Verify setting options and tooltips for value filter', () => {
-      enterNativeFilterEditModal(false);
-      cy.contains('Filter value is required').scrollIntoView();
-      cy.get('body').trigger('mousemove', { clientX: 0, clientY: 0 });
-      cy.wait(300);
-
-      cy.contains('Filter value is required').should('be.visible').click({
-        force: true,
-      });
-      checkNativeFilterTooltip(0, nativeFilterTooltips.preFilter);
-      checkNativeFilterTooltip(1, nativeFilterTooltips.defaultValue);
-      cy.get(nativeFilters.modal.container).should('be.visible');
-      valueNativeFilterOptions.forEach(el => {
-        cy.contains(el);
-      });
-      cy.contains('Values are dependent on other filters').should('not.exist');
-      cy.get(
-        nativeFilters.filterConfigurationSections.checkedCheckbox,
-      ).contains('Can select multiple values');
-      checkNativeFilterTooltip(2, nativeFilterTooltips.required);
-      checkNativeFilterTooltip(3, nativeFilterTooltips.defaultToFirstItem);
-      checkNativeFilterTooltip(4, nativeFilterTooltips.searchAllFilterOptions);
-      checkNativeFilterTooltip(5, nativeFilterTooltips.inverseSelection);
-      clickOnAddFilterInModal();
-      cy.contains('Values are dependent on other filters').should('exist');
-    });
-  });
-});

superset-frontend/cypress-base/cypress/e2e/dashboard/_skip.tabs.test.ts

@@ -1,194 +0,0 @@
-/**
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-import {
-  parsePostForm,
-  waitForChartLoad,
-  getChartAliasBySpec,
-} from 'cypress/utils';
-import { TABBED_DASHBOARD } from 'cypress/utils/urls';
-import { expandFilterOnLeftPanel } from './utils';
-
-const TREEMAP = { name: 'Treemap', viz: 'treemap_v2' };
-const LINE_CHART = { name: 'Growth Rate', viz: 'echarts_timeseries_line' };
-const BOX_PLOT = { name: 'Box plot', viz: 'box_plot' };
-const BIG_NUMBER = { name: 'Number of Girls', viz: 'big_number_total' };
-const TABLE = { name: 'Names Sorted by Num in California', viz: 'table' };
-
-function topLevelTabs() {
-  cy.getBySel('dashboard-component-tabs')
-    .first()
-    .find('[data-test="nav-list"] .ant-tabs-nav-list > .ant-tabs-tab')
-    .as('top-level-tabs');
-}
-
-function resetTabs() {
-  topLevelTabs();
-  cy.get('@top-level-tabs').first().click();
-  waitForChartLoad(TREEMAP);
-  waitForChartLoad(BIG_NUMBER);
-  waitForChartLoad(TABLE);
-}
-
-describe.skip('Dashboard tabs', () => {
-  before(() => {
-    cy.visit(TABBED_DASHBOARD);
-  });
-
-  beforeEach(() => {
-    resetTabs();
-  });
-
-  it('should switch tabs', () => {
-    topLevelTabs();
-
-    cy.get('@top-level-tabs').first().click();
-    cy.get('@top-level-tabs')
-      .first()
-      .should('have.class', 'ant-tabs-tab-active');
-    cy.get('@top-level-tabs')
-      .last()
-      .should('not.have.class', 'ant-tabs-tab-active');
-    cy.get('[data-test-chart-name="Box plot"]').should('not.exist');
-    cy.get('[data-test-chart-name="Trends"]').should('not.exist');
-
-    cy.get('@top-level-tabs').last().click();
-    cy.get('@top-level-tabs')
-      .last()
-      .should('have.class', 'ant-tabs-tab-active');
-    cy.get('@top-level-tabs')
-      .first()
-      .should('not.have.class', 'ant-tabs-tab-active');
-    waitForChartLoad(BOX_PLOT);
-
-    cy.get('[data-test-chart-name="Box plot"]').should('exist');
-
-    resetTabs();
-
-    // click row level tab, see 1 more chart
-    cy.getBySel('dashboard-component-tabs')
-      .eq(2)
-      .find('[data-test="nav-list"] .ant-tabs-nav-list > .ant-tabs-tab')
-      .as('row-level-tabs');
-
-    cy.get('@row-level-tabs').last().click();
-    waitForChartLoad(LINE_CHART);
-    cy.get('[data-test-chart-name="Trends"]').should('exist');
-    cy.get('@row-level-tabs').first().click();
-  });
-
-  it.skip('should send new queries when tab becomes visible', () => {
-    // landing in first tab
-    waitForChartLoad(TREEMAP);
-
-    getChartAliasBySpec(TREEMAP).then(treemapAlias => {
-      // apply filter
-      cy.get('.Select__control').first().should('be.visible').click();
-      cy.get('.Select__control input[type=text]').first().focus();
-      cy.focused().type('South');
-      cy.get('.Select__option').contains('South Asia').click();
-      cy.get('.filter button:not(:disabled)').contains('Apply').click();
-
-      // send new query from same tab
-      cy.wait(treemapAlias).then(({ request }) => {
-        const requestBody = parsePostForm(request.body);
-        const requestParams = JSON.parse(requestBody.form_data as string);
-        expect(requestParams.extra_filters[0]).deep.eq({
-          col: 'region',
-          op: 'IN',
-          val: ['South Asia'],
-        });
-      });
-    });
-
-    cy.intercept('**/superset/explore_json/?*').as('legacyChartData');
-    // click row level tab, send 1 more query
-    cy.get('.ant-tabs-tab').contains('row tab 2').click();
-
-    cy.wait('@legacyChartData').then(({ request }) => {
-      const requestBody = parsePostForm(request.body);
-      const requestParams = JSON.parse(requestBody.form_data as string);
-      expect(requestParams.extra_filters[0]).deep.eq({
-        col: 'region',
-        op: 'IN',
-        val: ['South Asia'],
-      });
-      expect(requestParams.viz_type).eq(LINE_CHART.viz);
-    });
-
-    cy.intercept('POST', '**/api/v1/chart/data?*').as('v1ChartData');
-
-    // click top level tab, send 1 more query
-    cy.get('.ant-tabs-tab').contains('Tab B').click();
-
-    cy.wait('@v1ChartData').then(({ request }) => {
-      expect(request.body.queries[0].filters[0]).deep.eq({
-        col: 'region',
-        op: 'IN',
-        val: ['South Asia'],
-      });
-    });
-
-    getChartAliasBySpec(BOX_PLOT).then(boxPlotAlias => {
-      // navigate to filter and clear filter
-      cy.get('.ant-tabs-tab').contains('Tab A').click();
-      cy.get('.ant-tabs-tab').contains('row tab 1').click();
-
-      cy.get('.Select__clear-indicator').click();
-      cy.get('.filter button:not(:disabled)').contains('Apply').click();
-
-      // trigger 1 new query
-      waitForChartLoad(TREEMAP);
-      // make sure query API not requested multiple times
-      cy.on('fail', err => {
-        expect(err.message).to.include('timed out waiting');
-        return false;
-      });
-
-      cy.wait(boxPlotAlias, { timeout: 1000 }).then(() => {
-        throw new Error('Unexpected API call.');
-      });
-    });
-  });
-
-  it('should update size when switch tab', () => {
-    cy.get('@top-level-tabs').last().click();
-    cy.get('@top-level-tabs')
-      .last()
-      .should('have.class', 'ant-tabs-tab-active');
-
-    expandFilterOnLeftPanel();
-
-    cy.wait(1000);
-
-    cy.get('@top-level-tabs').first().click();
-    cy.get('@top-level-tabs')
-      .first()
-      .should('have.class', 'ant-tabs-tab-active');
-
-    cy.wait(1000);
-
-    cy.get("[data-test-viz-type='treemap_v2'] .chart-container").then(
-      $chartContainer => {
-        expect($chartContainer.get(0).scrollWidth).eq(
-          $chartContainer.get(0).offsetWidth,
-        );
-      },
-    );
-  });
-});

superset-frontend/cypress-base/cypress/e2e/dashboard/_skip.url_params.test.ts

@@ -1,45 +0,0 @@
-/**
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-import { parsePostForm, JsonObject, waitForChartLoad } from 'cypress/utils';
-import { WORLD_HEALTH_DASHBOARD } from 'cypress/utils/urls';
-import { WORLD_HEALTH_CHARTS } from './utils';
-
-describe('Dashboard form data', () => {
-  const urlParams = { param1: '123', param2: 'abc' };
-  before(() => {
-    cy.visit(WORLD_HEALTH_DASHBOARD, { qs: urlParams });
-  });
-
-  it('should apply url params to slice requests', () => {
-    cy.intercept('**/api/v1/chart/data?*', request => {
-      // TODO: export url params to chart data API
-      request.body.queries.forEach((query: { url_params: JsonObject }) => {
-        expect(query.url_params).deep.eq(urlParams);
-      });
-    });
-    cy.intercept('**/superset/explore_json/*', request => {
-      const requestParams = JSON.parse(
-        parsePostForm(request.body).form_data as string,
-      );
-      expect(requestParams.url_params).deep.eq(urlParams);
-    });
-
-    WORLD_HEALTH_CHARTS.forEach(waitForChartLoad);
-  });
-});

superset-frontend/cypress-base/cypress/e2e/explore/_skip.AdhocFilters.test.ts

@@ -1,109 +0,0 @@
-/**
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-describe('AdhocFilters', () => {
-  beforeEach(() => {
-    cy.intercept('GET', '**/api/v1/datasource/table/*/column/name/values').as(
-      'filterValues',
-    );
-    cy.intercept('POST', '**/superset/explore_json/**').as('postJson');
-    cy.intercept('GET', '**/superset/explore_json/**').as('getJson');
-    cy.visitChartByName('Boys'); // a table chart
-    cy.verifySliceSuccess({ waitAlias: '@postJson' });
-  });
-
-  let numScripts = 0;
-
-  it('Should load AceEditor scripts when needed', () => {
-    cy.get('script').then(nodes => {
-      numScripts = nodes.length;
-    });
-
-    cy.get('[data-test=adhoc_filters]').within(() => {
-      cy.get('.Select__control').scrollIntoView();
-      cy.get('.Select__control').click();
-      cy.get('input[type=text]').focus();
-      cy.focused().type('name{enter}');
-      cy.get("div[role='button']").first().click();
-    });
-
-    // antd tabs do lazy loading, so we need to click on tab with ace editor
-    cy.get('#filter-edit-popover').within(() => {
-      cy.get('.ant-tabs-tab').contains('Custom SQL').click();
-      cy.get('.ant-tabs-tab').contains('Simple').click();
-    });
-
-    cy.get('script').then(nodes => {
-      // should load new script chunks for SQL editor
-      expect(nodes.length).to.greaterThan(numScripts);
-    });
-  });
-
-  it('Set simple adhoc filter', () => {
-    cy.get('[aria-label="Comparator option"] .Select__control').click();
-    cy.get('[data-test=adhoc-filter-simple-value] input[type=text]').focus();
-    cy.focused().type('Jack{enter}', { delay: 20 });
-
-    cy.get('[data-test="adhoc-filter-edit-popover-save-button"]').click();
-
-    cy.get(
-      '[data-test=adhoc_filters] .Select__control span.option-label',
-    ).contains('name = Jack');
-
-    cy.get('button[data-test="run-query-button"]').click();
-    cy.verifySliceSuccess({
-      waitAlias: '@postJson',
-      chartSelector: 'svg',
-    });
-  });
-
-  it('Set custom adhoc filter', () => {
-    const filterType = 'name';
-    const filterContent = "'Amy' OR name = 'Donald'";
-
-    cy.get('[data-test=adhoc_filters] .Select__control').scrollIntoView();
-    cy.get('[data-test=adhoc_filters] .Select__control').click();
-
-    // remove previous input
-    cy.get('[data-test=adhoc_filters] input[type=text]').focus();
-    cy.focused().type('{backspace}');
-
-    cy.get('[data-test=adhoc_filters] input[type=text]').focus();
-    cy.focused().type(`${filterType}{enter}`);
-
-    cy.wait('@filterValues');
-
-    // selecting a new filter should auto-open the popup,
-    // so the tab should be visible by now
-    cy.get('#filter-edit-popover #adhoc-filter-edit-tabs-tab-SQL').click();
-    cy.get('#filter-edit-popover .ace_content').click();
-    cy.get('#filter-edit-popover .ace_text-input').type(filterContent);
-    cy.get('[data-test="adhoc-filter-edit-popover-save-button"]').click();
-
-    // check if the filter was saved correctly
-    cy.get(
-      '[data-test=adhoc_filters] .Select__control span.option-label',
-    ).contains(`${filterType} = ${filterContent}`);
-
-    cy.get('button[data-test="run-query-button"]').click();
-    cy.verifySliceSuccess({
-      waitAlias: '@postJson',
-      chartSelector: 'svg',
-    });
-  });
-});

superset-frontend/cypress-base/cypress/e2e/explore/_skip.AdhocMetrics.test.ts

@@ -1,123 +0,0 @@
-/**
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-import { interceptChart } from 'cypress/utils';
-
-describe('AdhocMetrics', () => {
-  beforeEach(() => {
-    interceptChart({ legacy: false }).as('chartData');
-    cy.visitChartByName('Num Births Trend');
-    cy.verifySliceSuccess({ waitAlias: '@chartData' });
-  });
-
-  it('Clear metric and set simple adhoc metric', () => {
-    const metric = 'sum(num_girls)';
-    const metricName = 'Sum Girls';
-    cy.get('[data-test=metrics]')
-      .find('[data-test="remove-control-button"]')
-      .click();
-
-    cy.get('[data-test=metrics]')
-      .contains('Drop columns/metrics here or click')
-      .click();
-
-    // Title edit for saved metrics is disabled - switch to Simple
-    cy.get('[id="adhoc-metric-edit-tabs-tab-SIMPLE"]').click();
-
-    cy.get('[data-test="AdhocMetricEditTitle#trigger"]').click();
-    cy.get('[data-test="AdhocMetricEditTitle#input"]').type(metricName);
-
-    cy.get('input[aria-label="Select column"]').click();
-    cy.get('input[aria-label="Select column"]').type('num_girls{enter}');
-    cy.get('input[aria-label="Select aggregate options"]').click();
-    cy.get('input[aria-label="Select aggregate options"]').type('sum{enter}');
-
-    cy.get('[data-test="AdhocMetricEdit#save"]').contains('Save').click();
-
-    cy.get('[data-test="control-label"]').contains(metricName);
-
-    cy.get('button[data-test="run-query-button"]').click();
-    cy.verifySliceSuccess({
-      waitAlias: '@chartData',
-      querySubstring: `${metric} AS "${metricName}"`, // SQL statement
-    });
-  });
-
-  xit('Switch from simple to custom sql', () => {
-    cy.get('[data-test=metrics]')
-      .find('[data-test="metric-option"]')
-      .should('have.length', 1);
-
-    // select column "num"
-    cy.get('[data-test=metrics]').find('.Select__clear-indicator').click();
-
-    cy.get('[data-test=metrics]').find('.Select__control').click();
-
-    cy.get('[data-test=metrics]').find('.Select__control input').type('num');
-
-    cy.get('[data-test=metrics]')
-      .find('.option-label')
-      .first()
-      .should('have.text', 'num')
-      .click();
-
-    // add custom SQL
-    cy.get('#adhoc-metric-edit-tabs-tab-SQL').click();
-    cy.get('[data-test=metrics-edit-popover]').within(() => {
-      cy.get('.ace_content').click();
-      cy.get('.ace_text-input').type('/COUNT(DISTINCT name)', { force: true });
-      cy.get('[data-test="AdhocMetricEdit#save"]').contains('Save').click();
-    });
-
-    cy.get('button[data-test="run-query-button"]').click();
-
-    const metric = 'SUM(num)/COUNT(DISTINCT name)';
-    cy.verifySliceSuccess({
-      waitAlias: '@chartData',
-      querySubstring: `${metric} AS "${metric}"`,
-    });
-  });
-
-  xit('Switch from custom sql tabs to simple', () => {
-    cy.get('[data-test=metrics]').within(() => {
-      cy.get('.Select__dropdown-indicator').click();
-      cy.get('input[type=text]').type('num_girls{enter}');
-    });
-    cy.get('[data-test=metrics]')
-      .find('[data-test="metric-option"]')
-      .should('have.length', 2);
-
-    cy.get('#metrics-edit-popover').within(() => {
-      cy.get('#adhoc-metric-edit-tabs-tab-SQL').click();
-      cy.get('.ace_identifier').contains('num_girls');
-      cy.get('.ace_content').click();
-      cy.get('.ace_text-input').type('{selectall}{backspace}SUM(num)');
-      cy.get('#adhoc-metric-edit-tabs-tab-SIMPLE').click();
-      cy.get('.Select__single-value').contains(/^num$/);
-      cy.get('button').contains('Save').click();
-    });
-
-    cy.get('button[data-test="run-query-button"]').click();
-
-    const metric = 'SUM(num)';
-    cy.verifySliceSuccess({
-      waitAlias: '@chartData',
-      querySubstring: `${metric} AS "${metric}"`,
-    });
-  });
-});

superset-frontend/cypress-base/cypress/e2e/explore/_skip.advanced_analytics.test.ts

@@ -1,65 +0,0 @@
-/**
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-import { interceptV1ChartData } from './utils';
-
-describe('Advanced analytics', () => {
-  beforeEach(() => {
-    interceptV1ChartData();
-    cy.intercept('PUT', '**/api/v1/explore/**').as('putExplore');
-    cy.intercept('GET', '**/explore/**').as('getExplore');
-  });
-
-  it('Create custom time compare', () => {
-    cy.visitChartByName('Num Births Trend');
-    cy.verifySliceSuccess({ waitAlias: '@v1Data' });
-
-    cy.get('.ant-collapse-header')
-      .contains('Advanced analytics')
-      .click({ force: true });
-
-    cy.get('[data-test=time_compare]').find('.ant-select').click();
-    cy.get('[data-test=time_compare]')
-      .find('input[type=search]')
-      .type('28 days{enter}');
-
-    cy.get('[data-test=time_compare]').find('input[type=search]').clear();
-    cy.get('[data-test=time_compare]')
-      .find('input[type=search]')
-      .type('1 year{enter}');
-
-    cy.get('button[data-test="run-query-button"]').click();
-    cy.wait('@v1Data');
-    cy.wait('@putExplore');
-
-    cy.reload();
-    cy.verifySliceSuccess({
-      waitAlias: '@v1Data',
-    });
-    cy.wait('@getExplore');
-    cy.get('.ant-collapse-header')
-      .contains('Advanced analytics')
-      .click({ force: true });
-    cy.get('[data-test=time_compare]')
-      .find('.ant-select-selector')
-      .contains('28 days');
-    cy.get('[data-test=time_compare]')
-      .find('.ant-select-selector')
-      .contains('1 year');
-  });
-});

superset-frontend/cypress-base/cypress/e2e/explore/_skip.annotations.test.ts

@@ -1,48 +0,0 @@
-/**
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-import { interceptChart } from 'cypress/utils';
-
-describe('Annotations', () => {
-  beforeEach(() => {
-    interceptChart({ legacy: false }).as('chartData');
-  });
-
-  it('Create formula annotation y-axis goal line', () => {
-    cy.visitChartByName('Num Births Trend');
-    cy.verifySliceSuccess({ waitAlias: '@chartData' });
-
-    const layerLabel = 'Goal line';
-
-    // get by text Annotations and Layers
-    cy.get('span').contains('Annotations and Layers').click();
-
-    cy.get('[data-test=annotation_layers]').click();
-
-    cy.get('[data-test="popover-content"]').within(() => {
-      cy.get('[aria-label=Name]').type(layerLabel);
-      cy.get('[aria-label=Formula]').type('y=1400000');
-      cy.get('button').contains('OK').click();
-    });
-
-    cy.get('button[data-test="run-query-button"]').click();
-    cy.get('[data-test=annotation_layers]').contains(layerLabel);
-
-    cy.verifySliceSuccess({ waitAlias: '@chartData' });
-  });
-});

superset-frontend/cypress-base/cypress/e2e/explore/_skip.link.test.ts

@@ -1,192 +0,0 @@
-/**
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-// ***********************************************
-// Tests for links in the explore UI
-// ***********************************************
-
-import rison from 'rison';
-import { nanoid } from 'nanoid';
-import { interceptChart } from 'cypress/utils';
-import { HEALTH_POP_FORM_DATA_DEFAULTS } from './visualizations/shared.helper';
-
-const apiURL = (endpoint: string, queryObject: Record<string, unknown>) =>
-  `${endpoint}?q=${rison.encode(queryObject)}`;
-
-describe('Test explore links', () => {
-  beforeEach(() => {
-    interceptChart({ legacy: false }).as('chartData');
-  });
-
-  it('Open and close view query modal', () => {
-    cy.visitChartByName('Growth Rate');
-    cy.verifySliceSuccess({ waitAlias: '@chartData' });
-
-    cy.get('[aria-label="Menu actions trigger"]').click();
-    cy.get('span').contains('View query').parent().click();
-    cy.wait('@chartData').then(() => {
-      cy.get('code');
-    });
-    cy.get('.ant-modal-content').within(() => {
-      cy.get('button.ant-modal-close').first().click({ force: true });
-    });
-  });
-
-  it('Test iframe link', () => {
-    cy.visitChartByName('Growth Rate');
-    cy.verifySliceSuccess({ waitAlias: '@chartData' });
-
-    cy.get('[aria-label="Menu actions trigger"]').click();
-    cy.get('div[role="menuitem"]').within(() => {
-      cy.contains('Share').parent().click();
-    });
-    cy.getBySel('embed-code-button').click();
-    cy.get('#embed-code-popover').within(() => {
-      cy.get('textarea[name=embedCode]').contains('iframe');
-    });
-  });
-
-  it('Test chart save as AND overwrite', () => {
-    interceptChart({ legacy: false }).as('tableChartData');
-
-    const formData = {
-      ...HEALTH_POP_FORM_DATA_DEFAULTS,
-      viz_type: 'table',
-      metrics: ['sum__SP_POP_TOTL'],
-      groupby: ['country_name'],
-    };
-    const newChartName = `Test chart [${nanoid()}]`;
-
-    cy.visitChartByParams(formData);
-    cy.verifySliceSuccess({ waitAlias: '@tableChartData' });
-    cy.url().then(() => {
-      cy.get('[data-test="query-save-button"]').click();
-      cy.get('[data-test="saveas-radio"]').check();
-      cy.get('[data-test="new-chart-name"]').type(newChartName, {
-        force: true,
-      });
-      cy.get('[data-test="btn-modal-save"]').click();
-      cy.verifySliceSuccess({ waitAlias: '@tableChartData' });
-      cy.visitChartByName(newChartName);
-
-      // Overwriting!
-      cy.get('[data-test="query-save-button"]').click();
-      cy.get('[data-test="save-overwrite-radio"]').check();
-      cy.get('[data-test="btn-modal-save"]').click();
-      cy.verifySliceSuccess({ waitAlias: '@tableChartData' });
-      const query = {
-        filters: [
-          {
-            col: 'slice_name',
-            opr: 'eq',
-            value: newChartName,
-          },
-        ],
-      };
-
-      cy.request(apiURL('/api/v1/chart/', query)).then(response => {
-        expect(response.body.count).equals(1);
-      });
-      cy.deleteChartByName(newChartName, true);
-    });
-  });
-
-  it('Test chart save as and add to new dashboard', () => {
-    const chartName = 'Growth Rate';
-    const newChartName = `${chartName} [${nanoid()}]`;
-    const dashboardTitle = `Test dashboard [${nanoid()}]`;
-
-    cy.visitChartByName(chartName);
-    cy.verifySliceSuccess({ waitAlias: '@chartData' });
-
-    cy.get('[data-test="query-save-button"]').click();
-    cy.get('[data-test="saveas-radio"]').check();
-    cy.get('[data-test="new-chart-name"]').click();
-    cy.get('[data-test="new-chart-name"]').clear();
-    cy.get('[data-test="new-chart-name"]').type(newChartName);
-    // Add a new option using the "CreatableSelect" feature
-    cy.get('[data-test="save-chart-modal-select-dashboard-form"]')
-      .find('input[aria-label="Select a dashboard"]')
-      .type(`${dashboardTitle}`, { force: true });
-
-    cy.get(`.ant-select-item[title="${dashboardTitle}"]`).click({
-      force: true,
-    });
-
-    cy.get('[data-test="btn-modal-save"]').click();
-    cy.verifySliceSuccess({ waitAlias: '@chartData' });
-    let query = {
-      filters: [
-        {
-          col: 'dashboard_title',
-          opr: 'eq',
-          value: dashboardTitle,
-        },
-      ],
-    };
-    cy.request(apiURL('/api/v1/dashboard/', query)).then(response => {
-      expect(response.body.count).equals(1);
-    });
-
-    cy.visitChartByName(newChartName);
-    cy.verifySliceSuccess({ waitAlias: '@chartData' });
-
-    cy.get('[data-test="query-save-button"]').click();
-    cy.get('[data-test="save-overwrite-radio"]').check();
-    cy.get('[data-test="new-chart-name"]').click();
-    cy.get('[data-test="new-chart-name"]').clear();
-    cy.get('[data-test="new-chart-name"]').type(newChartName);
-    // This time around, typing the same dashboard name
-    // will select the existing one
-    cy.get('[data-test="save-chart-modal-select-dashboard-form"]')
-      .find('input[aria-label^="Select a dashboard"]')
-      .type(`${dashboardTitle}{enter}`, { force: true });
-
-    cy.get(`.ant-select-item[title="${dashboardTitle}"]`).click({
-      force: true,
-    });
-
-    cy.get('[data-test="btn-modal-save"]').click();
-    cy.verifySliceSuccess({ waitAlias: '@chartData' });
-    query = {
-      filters: [
-        {
-          col: 'slice_name',
-          opr: 'eq',
-          value: chartName,
-        },
-      ],
-    };
-    cy.request(apiURL('/api/v1/chart/', query)).then(response => {
-      expect(response.body.count).equals(1);
-    });
-    query = {
-      filters: [
-        {
-          col: 'dashboard_title',
-          opr: 'eq',
-          value: dashboardTitle,
-        },
-      ],
-    };
-    cy.request(apiURL('/api/v1/dashboard/', query)).then(response => {
-      expect(response.body.count).equals(1);
-    });
-    cy.deleteDashboardByName(dashboardTitle, true);
-  });
-});

superset-frontend/cypress-base/cypress/e2e/explore/visualizations/_skip.big_number.test.js

@@ -1,80 +0,0 @@
-/**
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-import { interceptChart } from 'cypress/utils';
-
-describe('Visualization > Big Number with Trendline', () => {
-  beforeEach(() => {
-    interceptChart({ legacy: false }).as('chartData');
-  });
-
-  const BIG_NUMBER_FORM_DATA = {
-    datasource: '2__table',
-    viz_type: 'big_number',
-    slice_id: 42,
-    granularity_sqla: 'year',
-    time_grain_sqla: 'P1D',
-    time_range: '2000 : 2014-01-02',
-    metric: 'sum__SP_POP_TOTL',
-    adhoc_filters: [],
-    compare_lag: '10',
-    compare_suffix: 'over 10Y',
-    y_axis_format: '.3s',
-    show_trend_line: true,
-    start_y_axis_at_zero: true,
-    color_picker: {
-      r: 0,
-      g: 122,
-      b: 135,
-      a: 1,
-    },
-  };
-
-  function verify(formData) {
-    cy.visitChartByParams(formData);
-    cy.verifySliceSuccess({
-      waitAlias: '@chartData',
-      chartSelector: '.superset-legacy-chart-big-number',
-    });
-  }
-
-  it('should work', () => {
-    verify(BIG_NUMBER_FORM_DATA);
-    cy.get('.chart-container .header-line');
-    cy.get('.chart-container canvas');
-  });
-
-  it('should work without subheader', () => {
-    verify({
-      ...BIG_NUMBER_FORM_DATA,
-      compare_lag: null,
-    });
-    cy.get('.chart-container .header-line');
-    cy.get('.chart-container .subtitle-line').should('not.exist');
-    cy.get('.chart-container canvas');
-  });
-
-  it('should not render trendline when hidden', () => {
-    verify({
-      ...BIG_NUMBER_FORM_DATA,
-      show_trend_line: false,
-    });
-    cy.get('[data-test="chart-container"] .header-line');
-    cy.get('[data-test="chart-container"] canvas').should('not.exist');
-  });
-});

superset-frontend/cypress-base/cypress/e2e/explore/visualizations/_skip.big_number_total.test.js

@@ -1,79 +0,0 @@
-/**
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-import { interceptChart } from 'cypress/utils';
-import { FORM_DATA_DEFAULTS, NUM_METRIC } from './shared.helper';
-
-describe('Visualization > Big Number Total', () => {
-  beforeEach(() => {
-    interceptChart({ legacy: false }).as('chartData');
-  });
-
-  const BIG_NUMBER_DEFAULTS = {
-    ...FORM_DATA_DEFAULTS,
-    viz_type: 'big_number_total',
-  };
-
-  it('Test big number chart with adhoc metric', () => {
-    const formData = { ...BIG_NUMBER_DEFAULTS, metric: NUM_METRIC };
-
-    cy.visitChartByParams(formData);
-    cy.verifySliceSuccess({
-      waitAlias: '@chartData',
-      querySubstring: NUM_METRIC.label,
-    });
-  });
-
-  it('Test big number chart with simple filter', () => {
-    const filters = [
-      {
-        expressionType: 'SIMPLE',
-        subject: 'name',
-        operator: 'IN',
-        comparator: ['Aaron', 'Amy', 'Andrea'],
-        clause: 'WHERE',
-        sqlExpression: null,
-        filterOptionName: 'filter_4y6teao56zs_ebjsvwy48c',
-      },
-    ];
-
-    const formData = {
-      ...BIG_NUMBER_DEFAULTS,
-      metric: 'count',
-      adhoc_filters: filters,
-    };
-
-    cy.visitChartByParams(formData);
-    cy.verifySliceSuccess({ waitAlias: '@chartData' });
-  });
-
-  it('Test big number chart ignores groupby', () => {
-    const formData = {
-      ...BIG_NUMBER_DEFAULTS,
-      metric: NUM_METRIC,
-      groupby: ['state'],
-    };
-
-    cy.visitChartByParams(formData);
-    cy.wait(['@chartData']).then(async ({ response }) => {
-      cy.verifySliceContainer();
-      const responseBody = response?.body;
-      expect(responseBody.result[0].query).not.contains(formData.groupby[0]);
-    });
-  });
-});

superset-frontend/cypress-base/cypress/e2e/explore/visualizations/_skip.box_plot.test.js

@@ -1,65 +0,0 @@
-/**
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-import { getDatasetId } from './shared.helper';
-
-describe('Visualization > Box Plot', () => {
-  beforeEach(() => {
-    cy.intercept('POST', '**/api/v1/chart/data*').as('getJson');
-  });
-
-  const getBoxPlotFormData = datasetId => ({
-    datasource: `${datasetId}__table`,
-    viz_type: 'box_plot',
-    granularity_sqla: 'year',
-    time_grain_sqla: 'P1D',
-    time_range: '1960-01-01 : now',
-    metrics: ['sum__SP_POP_TOTL'],
-    adhoc_filters: [],
-    groupby: ['region'],
-    limit: '25',
-    color_scheme: 'bnbColors',
-    whisker_options: 'Min/max (no outliers)',
-  });
-
-  function verify(formData) {
-    cy.visitChartByParams(formData);
-    cy.verifySliceSuccess({ waitAlias: '@getJson' });
-  }
-
-  it('should work', () => {
-    getDatasetId('wb_health_population').then(datasetId => {
-      verify(getBoxPlotFormData(datasetId));
-      cy.get('.chart-container .box_plot canvas').should('have.length', 1);
-    });
-  });
-
-  it('should allow type to search color schemes', () => {
-    getDatasetId('wb_health_population').then(datasetId => {
-      verify(getBoxPlotFormData(datasetId));
-
-      cy.get('#controlSections-tab-CUSTOMIZE').click();
-      cy.get('.Control[data-test="color_scheme"]').scrollIntoView();
-      cy.get('.Control[data-test="color_scheme"] input[type="search"]').focus();
-      cy.focused().type('supersetColors{enter}');
-      cy.get(
-        '.Control[data-test="color_scheme"] .ant-select-selection-item [data-test="supersetColors"]',
-      ).should('exist');
-    });
-  });
-});

superset-frontend/cypress-base/cypress/e2e/explore/visualizations/_skip.bubble.test.js

@@ -1,108 +0,0 @@
-/**
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-import { getDatasetId } from './shared.helper';
-
-describe('Visualization > Bubble', () => {
-  beforeEach(() => {
-    cy.intercept('POST', '**/superset/explore_json/**').as('getJson');
-  });
-
-  const getBubbleFormData = datasetId => ({
-    datasource: `${datasetId}__table`,
-    viz_type: 'bubble',
-    granularity_sqla: 'year',
-    time_grain_sqla: 'P1D',
-    time_range: '2011-01-01 : 2011-01-02',
-    series: 'region',
-    entity: 'country_name',
-    x: 'sum__SP_RUR_TOTL_ZS',
-    y: 'sum__SP_DYN_LE00_IN',
-    size: 'sum__SP_POP_TOTL',
-    max_bubble_size: '50',
-    limit: 0,
-    color_scheme: 'bnbColors',
-    show_legend: true,
-    x_axis_label: '',
-    left_margin: 'auto',
-    x_axis_format: '.3s',
-    x_ticks_layout: 'auto',
-    x_log_scale: false,
-    x_axis_showminmax: false,
-    y_axis_label: '',
-    bottom_margin: 'auto',
-    y_axis_format: '.3s',
-    y_log_scale: false,
-    y_axis_showminmax: false,
-  });
-
-  function verify(formData) {
-    cy.visitChartByParams(formData);
-    cy.verifySliceSuccess({ waitAlias: '@getJson', chartSelector: 'svg' });
-  }
-
-  it('should work with filter', () => {
-    getDatasetId('wb_health_population').then(datasetId => {
-      verify({
-        ...getBubbleFormData(datasetId),
-        adhoc_filters: [
-          {
-            expressionType: 'SIMPLE',
-            subject: 'region',
-            operator: '==',
-            comparator: 'South Asia',
-            clause: 'WHERE',
-            sqlExpression: null,
-            filterOptionName: 'filter_b2tfg1rs8y_8kmrcyxvsqd',
-          },
-        ],
-      });
-      cy.get('[data-test="chart-container"]').should('be.visible');
-      cy.get('[data-test="chart-container"]').within(() => {
-        cy.get('svg').find('.nv-point-clips circle').should('have.length', 8);
-      });
-      cy.get('[data-test="chart-container"]').then(nodeList => {
-        // Check that all circles have same color.
-        const color = nodeList[0].getAttribute('fill');
-        const circles = Array.prototype.slice.call(nodeList);
-        expect(circles.every(c => c.getAttribute('fill') === color)).to.equal(
-          true,
-        );
-      });
-    });
-  });
-
-  it('should allow type to search color schemes and apply the scheme', () => {
-    getDatasetId('wb_health_population').then(datasetId => {
-      cy.visitChartByParams(getBubbleFormData(datasetId));
-
-      cy.get('.Control[data-test="color_scheme"]').scrollIntoView();
-      cy.get('.Control[data-test="color_scheme"] input[type="search"]').focus();
-      cy.focused().type('supersetColors{enter}');
-      cy.get(
-        '.Control[data-test="color_scheme"] .ant-select-selection-item [data-test="supersetColors"]',
-      ).should('exist');
-      cy.get('[data-test=run-query-button]').click();
-      cy.get('.bubble .nv-legend .nv-legend-symbol').should(
-        'have.css',
-        'fill',
-        'rgb(31, 168, 201)',
-      );
-    });
-  });
-});

superset-frontend/cypress-base/cypress/e2e/explore/visualizations/_skip.compare.test.js

@@ -1,100 +0,0 @@
-/**
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-describe('Visualization > Compare', () => {
-  beforeEach(() => {
-    cy.intercept('POST', '**/superset/explore_json/**').as('getJson');
-  });
-
-  const COMPARE_FORM_DATA = {
-    datasource: '3__table',
-    viz_type: 'compare',
-    slice_id: 60,
-    granularity_sqla: 'ds',
-    time_grain_sqla: 'P1D',
-    time_range: '100 years ago : now',
-    metrics: ['count'],
-    adhoc_filters: [],
-    groupby: [],
-    order_desc: true,
-    contribution: false,
-    row_limit: 50000,
-    color_scheme: 'bnbColors',
-    x_axis_label: 'Frequency',
-    bottom_margin: 'auto',
-    x_ticks_layout: 'auto',
-    x_axis_format: 'smart_date',
-    x_axis_showminmax: false,
-    y_axis_label: 'Num',
-    left_margin: 'auto',
-    y_axis_showminmax: false,
-    y_log_scale: false,
-    y_axis_format: '.3s',
-    rolling_type: 'None',
-    comparison_type: 'values',
-    annotation_layers: [],
-  };
-
-  function verify(formData) {
-    cy.visitChartByParams(formData);
-    cy.verifySliceSuccess({ waitAlias: '@getJson', chartSelector: 'svg' });
-  }
-
-  it('should work without groupby', () => {
-    verify(COMPARE_FORM_DATA);
-    cy.get('.chart-container .nvd3 path.nv-line').should('have.length', 1);
-  });
-
-  it('should with group by', () => {
-    verify({
-      ...COMPARE_FORM_DATA,
-      groupby: ['gender'],
-    });
-    cy.get('.chart-container .nvd3 path.nv-line').should('have.length', 2);
-  });
-
-  it('should work with filter', () => {
-    verify({
-      ...COMPARE_FORM_DATA,
-      adhoc_filters: [
-        {
-          expressionType: 'SIMPLE',
-          subject: 'gender',
-          operator: '==',
-          comparator: 'boy',
-          clause: 'WHERE',
-          sqlExpression: null,
-          filterOptionName: 'filter_tqx1en70hh_7nksse7nqic',
-        },
-      ],
-    });
-    cy.get('.chart-container .nvd3 path.nv-line').should('have.length', 1);
-  });
-
-  it('should allow type to search color schemes and apply the scheme', () => {
-    verify(COMPARE_FORM_DATA);
-
-    cy.get('#controlSections-tab-CUSTOMIZE').click();
-    cy.get('.Control[data-test="color_scheme"]').scrollIntoView();
-    cy.get('.Control[data-test="color_scheme"] input[type="search"]').focus();
-    cy.focused().type('supersetColors{enter}');
-    cy.get(
-      '.Control[data-test="color_scheme"] .ant-select-selection-item [data-test="supersetColors"]',
-    ).should('exist');
-  });
-});

superset-frontend/cypress-base/cypress/e2e/explore/visualizations/_skip.download_chart.test.js

@@ -1,54 +0,0 @@
-/**
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-import { FORM_DATA_DEFAULTS, NUM_METRIC } from './shared.helper';
-
-describe('Download Chart > Bar chart', () => {
-  const VIZ_DEFAULTS = {
-    ...FORM_DATA_DEFAULTS,
-    viz_type: 'echarts_timeseries_bar',
-  };
-
-  beforeEach(() => {
-    cy.intercept('POST', '**/superset/explore_json/**').as('getJson');
-  });
-
-  it('download chart with image works', () => {
-    const formData = {
-      ...VIZ_DEFAULTS,
-      metrics: NUM_METRIC,
-      groupby: ['state'],
-    };
-
-    cy.visitChartByParams(formData);
-    cy.get('.header-with-actions .ant-dropdown-trigger').click();
-    cy.get(':nth-child(3) > .ant-dropdown-menu-submenu-title').click();
-    cy.get(
-      '.ant-dropdown-menu-submenu > .ant-dropdown-menu li:nth-child(1) > .ant-dropdown-menu-submenu-title',
-    ).click();
-    cy.get(
-      '.ant-dropdown-menu-submenu > .ant-dropdown-menu li:nth-child(3)',
-    ).click();
-
-    cy.verifyDownload('.jpg', {
-      contains: true,
-      timeout: 25000,
-      interval: 600,
-    });
-  });
-});

superset-frontend/cypress-base/cypress/e2e/explore/visualizations/_skip.gauge.test.js

@@ -1,75 +0,0 @@
-/**
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-
-describe('Visualization > Gauge', () => {
-  beforeEach(() => {
-    cy.intercept('POST', '**/api/v1/chart/data*').as('getJson');
-  });
-
-  const GAUGE_FORM_DATA = {
-    datasource: '3__table',
-    viz_type: 'gauge_chart',
-    metric: 'count',
-    adhoc_filters: [],
-    slice_id: 54,
-    row_limit: 10,
-  };
-
-  function verify(formData) {
-    cy.visitChartByParams(formData);
-    cy.verifySliceSuccess({ waitAlias: '@getJson' });
-  }
-
-  it('should work', () => {
-    verify(GAUGE_FORM_DATA);
-    cy.get('.chart-container .gauge_chart canvas').should('have.length', 1);
-  });
-
-  it('should work with simple filter', () => {
-    verify({
-      ...GAUGE_FORM_DATA,
-      adhoc_filters: [
-        {
-          expressionType: 'SIMPLE',
-          subject: 'country_code',
-          operator: '==',
-          comparator: 'USA',
-          clause: 'WHERE',
-          sqlExpression: null,
-          isExtra: false,
-          isNew: false,
-          filterOptionName: 'filter_jaemvkxd5h_ku22m3wyo',
-        },
-      ],
-    });
-    cy.get('.chart-container .gauge_chart canvas').should('have.length', 1);
-  });
-
-  it('should allow type to search color schemes', () => {
-    verify(GAUGE_FORM_DATA);
-
-    cy.get('#controlSections-tab-CUSTOMIZE').click();
-    cy.get('.Control[data-test="color_scheme"]').scrollIntoView();
-    cy.get('.Control[data-test="color_scheme"] input[type="search"]').focus();
-    cy.focused().type('bnbColors{enter}');
-    cy.get(
-      '.Control[data-test="color_scheme"] .ant-select-selection-item [data-test="bnbColors"]',
-    ).should('exist');
-  });
-});

superset-frontend/cypress-base/cypress/e2e/explore/visualizations/_skip.graph.test.ts

@@ -1,91 +0,0 @@
-/**
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-type adhocFilter = {
-  expressionType: string;
-  subject: string;
-  operator: string;
-  comparator: string;
-  clause: string;
-  sqlExpression: string | null;
-  filterOptionName: string;
-};
-
-describe('Visualization > Graph', () => {
-  beforeEach(() => {
-    cy.intercept('POST', '**/api/v1/chart/data*').as('getJson');
-  });
-
-  const GRAPH_FORM_DATA = {
-    datasource: '1__table',
-    viz_type: 'graph_chart',
-    slice_id: 55,
-    granularity_sqla: 'ds',
-    time_grain_sqla: 'P1D',
-    time_range: '100 years ago : now',
-    metric: 'sum__value',
-    adhoc_filters: [],
-    source: 'source',
-    target: 'target',
-    row_limit: 50000,
-    show_legend: true,
-    color_scheme: 'bnbColors',
-  };
-
-  function verify(formData: {
-    [name: string]: string | boolean | number | Array<adhocFilter>;
-  }): void {
-    cy.visitChartByParams(formData);
-    cy.verifySliceSuccess({ waitAlias: '@getJson' });
-  }
-
-  it('should work with ad-hoc metric', () => {
-    verify(GRAPH_FORM_DATA);
-    cy.get('.chart-container .graph_chart canvas').should('have.length', 1);
-  });
-
-  it('should work with simple filter', () => {
-    verify({
-      ...GRAPH_FORM_DATA,
-      adhoc_filters: [
-        {
-          expressionType: 'SIMPLE',
-          subject: 'source',
-          operator: '==',
-          comparator: 'Agriculture',
-          clause: 'WHERE',
-          sqlExpression: null,
-          filterOptionName: 'filter_tqx1en70hh_7nksse7nqic',
-        },
-      ],
-    });
-    cy.get('.chart-container .graph_chart canvas').should('have.length', 1);
-  });
-
-  it('should allow type to search color schemes', () => {
-    verify(GRAPH_FORM_DATA);
-
-    cy.get('#controlSections-tab-CUSTOMIZE').click();
-    cy.get('.Control[data-test="color_scheme"]').scrollIntoView();
-    cy.get('.Control[data-test="color_scheme"] input[type="search"]').focus();
-    cy.focused().type('bnbColors{enter}');
-    cy.get(
-      '.Control[data-test="color_scheme"] .ant-select-selection-item [data-test="bnbColors"]',
-    ).should('exist');
-  });
-});

superset-frontend/cypress-base/cypress/e2e/explore/visualizations/_skip.pie.test.js

@@ -1,82 +0,0 @@
-/**
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-describe('Visualization > Pie', () => {
-  beforeEach(() => {
-    cy.intercept('POST', '**/api/v1/chart/data*').as('getJson');
-  });
-
-  const PIE_FORM_DATA = {
-    datasource: '3__table',
-    viz_type: 'pie',
-    slice_id: 55,
-    granularity_sqla: 'ds',
-    time_grain_sqla: 'P1D',
-    time_range: '100 years ago : now',
-    metric: 'sum__num',
-    adhoc_filters: [],
-    groupby: ['gender'],
-    row_limit: 50000,
-    pie_label_type: 'key',
-    donut: false,
-    show_legend: true,
-    show_labels: true,
-    labels_outside: true,
-    color_scheme: 'bnbColors',
-  };
-
-  function verify(formData) {
-    cy.visitChartByParams(formData);
-    cy.verifySliceSuccess({ waitAlias: '@getJson' });
-  }
-
-  it('should work with ad-hoc metric', () => {
-    verify(PIE_FORM_DATA);
-    cy.get('.chart-container .pie canvas').should('have.length', 1);
-  });
-
-  it('should work with simple filter', () => {
-    verify({
-      ...PIE_FORM_DATA,
-      adhoc_filters: [
-        {
-          expressionType: 'SIMPLE',
-          subject: 'gender',
-          operator: '==',
-          comparator: 'boy',
-          clause: 'WHERE',
-          sqlExpression: null,
-          filterOptionName: 'filter_tqx1en70hh_7nksse7nqic',
-        },
-      ],
-    });
-    cy.get('.chart-container .pie canvas').should('have.length', 1);
-  });
-
-  it('should allow type to search color schemes', () => {
-    verify(PIE_FORM_DATA);
-
-    cy.get('#controlSections-tab-CUSTOMIZE').click();
-    cy.get('.Control[data-test="color_scheme"]').scrollIntoView();
-    cy.get('.Control[data-test="color_scheme"] input[type="search"]').focus();
-    cy.focused().type('supersetColors{enter}');
-    cy.get(
-      '.Control[data-test="color_scheme"] .ant-select-selection-item [data-test="supersetColors"]',
-    ).should('exist');
-  });
-});

superset-frontend/cypress-base/cypress/e2e/explore/visualizations/_skip.pivot_table.test.js

@@ -1,106 +0,0 @@
-/**
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-describe('Visualization > Pivot Table', () => {
-  beforeEach(() => {
-    cy.intercept('POST', '**/api/v1/chart/data**').as('chartData');
-  });
-
-  const PIVOT_TABLE_FORM_DATA = {
-    datasource: '3__table',
-    viz_type: 'pivot_table_v2',
-    slice_id: 61,
-    granularity_sqla: 'ds',
-    time_grain_sqla: 'P1D',
-    time_range: '100 years ago : now',
-    metrics: ['sum__num'],
-    adhoc_filters: [],
-    groupbyRows: ['name'],
-    groupbyColumns: ['state'],
-    series_limit: 5000,
-    aggregateFunction: 'Sum',
-    rowTotals: true,
-    colTotals: true,
-    valueFormat: '.3s',
-    combineMetric: false,
-  };
-
-  const TEST_METRIC = {
-    expressionType: 'SIMPLE',
-    column: {
-      id: 338,
-      column_name: 'num_boys',
-      expression: '',
-      filterable: false,
-      groupby: false,
-      is_dttm: false,
-      type: 'BIGINT',
-      optionName: '_col_num_boys',
-    },
-    aggregate: 'SUM',
-    hasCustomLabel: false,
-    label: 'SUM(num_boys)',
-    optionName: 'metric_gvpdjt0v2qf_6hkf56o012',
-  };
-
-  function verify(formData) {
-    cy.visitChartByParams(formData);
-    cy.verifySliceSuccess({ waitAlias: '@chartData', chartSelector: 'table' });
-  }
-
-  it('should work with single groupby', () => {
-    verify(PIVOT_TABLE_FORM_DATA);
-    cy.get('.chart-container tr:eq(0) th:eq(2)').contains('sum__num');
-    cy.get('.chart-container tr:eq(1) th:eq(0)').contains('state');
-    cy.get('.chart-container tr:eq(2) th:eq(0)').contains('name');
-  });
-
-  it('should work with more than one groupby', () => {
-    verify({
-      ...PIVOT_TABLE_FORM_DATA,
-      groupbyRows: ['name', 'gender'],
-    });
-    cy.get('.chart-container tr:eq(0) th:eq(2)').contains('sum__num');
-    cy.get('.chart-container tr:eq(1) th:eq(0)').contains('state');
-    cy.get('.chart-container tr:eq(2) th:eq(0)').contains('name');
-    cy.get('.chart-container tr:eq(2) th:eq(1)').contains('gender');
-  });
-
-  it('should work with multiple metrics', () => {
-    verify({
-      ...PIVOT_TABLE_FORM_DATA,
-      metrics: ['sum__num', TEST_METRIC],
-    });
-    cy.get('.chart-container tr:eq(0) th:eq(2)').contains('sum__num');
-    cy.get('.chart-container tr:eq(0) th:eq(3)').contains('SUM(num_boys)');
-    cy.get('.chart-container tr:eq(1) th:eq(0)').contains('state');
-    cy.get('.chart-container tr:eq(2) th:eq(0)').contains('name');
-  });
-
-  it('should work with multiple groupby and multiple metrics', () => {
-    verify({
-      ...PIVOT_TABLE_FORM_DATA,
-      groupbyRows: ['name', 'gender'],
-      metrics: ['sum__num', TEST_METRIC],
-    });
-    cy.get('.chart-container tr:eq(0) th:eq(2)').contains('sum__num');
-    cy.get('.chart-container tr:eq(0) th:eq(3)').contains('SUM(num_boys)');
-    cy.get('.chart-container tr:eq(2) th:eq(0)').contains('name');
-    cy.get('.chart-container tr:eq(2) th:eq(1)').contains('gender');
-  });
-});

superset-frontend/cypress-base/cypress/e2e/explore/visualizations/_skip.sunburst.test.js

@@ -1,97 +0,0 @@
-/**
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-describe('Visualization > Sunburst', () => {
-  beforeEach(() => {
-    cy.intercept('POST', '**/api/v1/chart/data**').as('chartData');
-  });
-
-  const SUNBURST_FORM_DATA = {
-    datasource: '2__table',
-    viz_type: 'sunburst_v2',
-    slice_id: 47,
-    granularity_sqla: 'year',
-    time_grain_sqla: 'P1D',
-    time_range: 'No filter',
-    columns: ['region'],
-    metric: 'sum__SP_POP_TOTL',
-    adhoc_filters: [],
-    row_limit: 50000,
-    color_scheme: 'bnbColors',
-  };
-
-  function verify(formData) {
-    cy.visitChartByParams(formData);
-    cy.verifySliceSuccess({ waitAlias: '@chartData' });
-  }
-
-  // requires the ability to render charts using SVG only for tests
-  it.skip('should work without secondary metric', () => {
-    verify(SUNBURST_FORM_DATA);
-    cy.get('.chart-container svg g path').should('have.length', 7);
-  });
-
-  // requires the ability to render charts using SVG only for tests
-  it.skip('should work with secondary metric', () => {
-    verify({
-      ...SUNBURST_FORM_DATA,
-      secondary_metric: 'sum__SP_RUR_TOTL',
-    });
-    cy.get('.chart-container svg g path').should('have.length', 7);
-  });
-
-  // requires the ability to render charts using SVG only for tests
-  it.skip('should work with multiple columns', () => {
-    verify({
-      ...SUNBURST_FORM_DATA,
-      columns: ['region', 'country_name'],
-    });
-    cy.get('.chart-container svg g path').should('have.length', 221);
-  });
-
-  // requires the ability to render charts using SVG only for tests
-  it.skip('should work with filter', () => {
-    verify({
-      ...SUNBURST_FORM_DATA,
-      adhoc_filters: [
-        {
-          expressionType: 'SIMPLE',
-          subject: 'region',
-          operator: 'IN',
-          comparator: ['South Asia', 'North America'],
-          clause: 'WHERE',
-          sqlExpression: null,
-          filterOptionName: 'filter_txje2ikiv6_wxmn0qwd1xo',
-        },
-      ],
-    });
-    cy.get('.chart-container svg g path').should('have.length', 2);
-  });
-
-  it('should allow type to search color schemes', () => {
-    verify(SUNBURST_FORM_DATA);
-
-    cy.get('#controlSections-tab-CUSTOMIZE').click();
-    cy.get('.Control[data-test="color_scheme"]').scrollIntoView();
-    cy.get('.Control[data-test="color_scheme"] input[type="search"]').focus();
-    cy.focused().type('supersetColors{enter}');
-    cy.get(
-      '.Control[data-test="color_scheme"] .ant-select-selection-item [data-test="supersetColors"]',
-    ).should('exist');
-  });
-});

superset-frontend/cypress-base/cypress/e2e/explore/visualizations/_skip.table.test.ts

@@ -1,474 +0,0 @@
-/**
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-import { interceptChart } from 'cypress/utils';
-import {
-  FORM_DATA_DEFAULTS,
-  NUM_METRIC,
-  MAX_DS,
-  MAX_STATE,
-  SIMPLE_FILTER,
-} from './shared.helper';
-
-// Table
-describe('Visualization > Table', () => {
-  beforeEach(() => {
-    interceptChart({ legacy: false }).as('chartData');
-  });
-
-  const VIZ_DEFAULTS = {
-    ...FORM_DATA_DEFAULTS,
-    viz_type: 'table',
-    row_limit: 1000,
-  };
-
-  const PERCENT_METRIC = {
-    expressionType: 'SQL',
-    sqlExpression: 'CAST(SUM(num_girls) AS FLOAT)/SUM(num)',
-    column: null,
-    aggregate: null,
-    hasCustomLabel: true,
-    label: 'Girls',
-    optionName: 'metric_6qwzgc8bh2v_zox7hil1mzs',
-  };
-
-  it('Use default time column', () => {
-    cy.visitChartByParams({
-      ...VIZ_DEFAULTS,
-      granularity_sqla: undefined,
-      metrics: ['count'],
-    });
-    cy.get('[data-test=adhoc_filters]').contains('ds');
-  });
-
-  it('Format non-numeric metrics correctly', () => {
-    cy.visitChartByParams({
-      ...VIZ_DEFAULTS,
-      include_time: true,
-      granularity_sqla: 'ds',
-      time_grain_sqla: 'P3M',
-      metrics: [NUM_METRIC, MAX_DS, MAX_STATE],
-    });
-    // when format with smart_date, time column use format by granularity
-    cy.get('.chart-container td:nth-child(1)').contains('2008 Q1');
-    // other column with timestamp use adaptive formatting
-    cy.get('.chart-container td:nth-child(3)').contains('2008');
-    cy.get('.chart-container td:nth-child(4)').contains('TX');
-  });
-
-  it('Format with table_timestamp_format', () => {
-    cy.visitChartByParams({
-      ...VIZ_DEFAULTS,
-      include_time: true,
-      granularity_sqla: 'ds',
-      time_grain_sqla: 'P3M',
-      table_timestamp_format: '%Y-%m-%d %H:%M',
-      metrics: [NUM_METRIC, MAX_DS, MAX_STATE],
-    });
-    // time column and MAX(ds) metric column both use UTC time
-    cy.get('.chart-container td:nth-child(1)').contains('2008-01-01 00:00');
-    cy.get('.chart-container td:nth-child(3)').contains('2008-01-01 00:00');
-    cy.get('.chart-container td')
-      .contains('2008-01-01 08:00')
-      .should('not.exist');
-    // time column should not use time granularity when timestamp format is set
-    cy.get('.chart-container td').contains('2008 Q1').should('not.exist');
-    // other num numeric metric column should stay as string
-    cy.get('.chart-container td').contains('TX');
-  });
-
-  it('Test table with groupby', () => {
-    cy.visitChartByParams({
-      ...VIZ_DEFAULTS,
-      metrics: [NUM_METRIC, MAX_DS],
-      groupby: ['name'],
-    });
-    cy.verifySliceSuccess({
-      waitAlias: '@chartData',
-      querySubstring: /GROUP BY.*name/i,
-      chartSelector: 'table',
-    });
-  });
-
-  it('Test table with groupby + time column', () => {
-    cy.visitChartByParams({
-      ...VIZ_DEFAULTS,
-      include_time: true,
-      granularity_sqla: 'ds',
-      time_grain_sqla: 'P3M',
-      metrics: [NUM_METRIC, MAX_DS],
-      groupby: ['name'],
-    });
-    cy.wait('@chartData').then(({ response }) => {
-      cy.verifySliceContainer('table');
-      const records = response?.body.result[0].data;
-      // should sort by first metric when no sort by metric is set
-      expect(records[0][NUM_METRIC.label]).greaterThan(
-        records[1][NUM_METRIC.label],
-      );
-    });
-
-    // should handle frontend sorting correctly
-    cy.get('.chart-container th').contains('name').click();
-    cy.get('.chart-container td:nth-child(2):eq(0)').contains('Adam');
-    cy.get('.chart-container th').contains('ds').click();
-    cy.get('.chart-container th').contains('ds').click();
-    cy.get('.chart-container td:nth-child(1):eq(0)').contains('2008');
-  });
-
-  it('Test table with percent metrics and groupby', () => {
-    cy.visitChartByParams({
-      ...VIZ_DEFAULTS,
-      percent_metrics: PERCENT_METRIC,
-      metrics: [],
-      groupby: ['name'],
-    });
-    cy.verifySliceSuccess({ waitAlias: '@chartData', chartSelector: 'table' });
-  });
-
-  it('Test table with groupby order desc', () => {
-    cy.visitChartByParams({
-      ...VIZ_DEFAULTS,
-      metrics: NUM_METRIC,
-      groupby: ['name'],
-      order_desc: true,
-    });
-    cy.verifySliceSuccess({ waitAlias: '@chartData', chartSelector: 'table' });
-  });
-
-  it('Test table with groupby + order by + no metric', () => {
-    cy.visitChartByParams({
-      ...VIZ_DEFAULTS,
-      metrics: [],
-      groupby: ['name'],
-      timeseries_limit_metric: NUM_METRIC,
-      order_desc: true,
-    });
-    // should contain only the group by column
-    cy.get('.chart-container th').its('length').should('eq', 1);
-    // should order correctly
-    cy.get('.chart-container td:eq(0)').contains('Michael');
-    cy.verifySliceSuccess({ waitAlias: '@chartData', chartSelector: 'table' });
-  });
-
-  it('Test table with groupby and limit', () => {
-    const limit = 10;
-    const formData = {
-      ...VIZ_DEFAULTS,
-      metrics: NUM_METRIC,
-      groupby: ['name'],
-      row_limit: limit,
-    };
-    cy.visitChartByParams(formData);
-    cy.wait('@chartData').then(({ response }) => {
-      cy.verifySliceContainer('table');
-      expect(response?.body.result[0].data.length).to.eq(limit);
-    });
-    cy.get('[data-test="row-count-label"]').contains('10 rows');
-  });
-
-  it('Test table with columns and row limit', () => {
-    cy.visitChartByParams({
-      ...VIZ_DEFAULTS,
-      // should still work when query_mode is not-set/invalid
-      query_mode: undefined,
-      all_columns: ['state'],
-      metrics: [],
-      row_limit: 100,
-    });
-
-    // should display in raw records mode
-    cy.get(
-      'div[data-test="query_mode"] .ant-radio-button-wrapper-checked',
-    ).contains('Raw records');
-    cy.get('div[data-test="all_columns"]').should('be.visible');
-    cy.get('div[data-test="groupby"]').should('not.exist');
-
-    cy.verifySliceSuccess({ waitAlias: '@chartData', chartSelector: 'table' });
-    cy.get('[data-test="row-count-label"]').contains('100 rows');
-
-    // should allow switch back to aggregate mode
-    cy.get('div[data-test="query_mode"] .ant-radio-button-wrapper')
-      .contains('Aggregate')
-      .click();
-    cy.get(
-      'div[data-test="query_mode"] .ant-radio-button-wrapper-checked',
-    ).contains('Aggregate');
-    cy.get('div[data-test="all_columns"]').should('not.exist');
-    cy.get('div[data-test="groupby"]').should('be.visible');
-  });
-
-  it('Test table with columns, ordering, and row limit', () => {
-    const limit = 10;
-
-    const formData = {
-      ...VIZ_DEFAULTS,
-      query_mode: 'raw',
-      all_columns: ['name', 'state', 'ds', 'num'],
-      metrics: [],
-      row_limit: limit,
-      order_by_cols: ['["num", false]'],
-    };
-
-    cy.visitChartByParams(formData);
-    cy.wait('@chartData').then(({ response }) => {
-      cy.verifySliceContainer('table');
-      const records = response?.body.result[0].data;
-      expect(records[0].num).greaterThan(records[records.length - 1].num);
-    });
-  });
-
-  it('Test table with simple filter', () => {
-    const metrics = ['count'];
-    const filters = [SIMPLE_FILTER];
-
-    const formData = { ...VIZ_DEFAULTS, metrics, adhoc_filters: filters };
-
-    cy.visitChartByParams(formData);
-    cy.verifySliceSuccess({ waitAlias: '@chartData', chartSelector: 'table' });
-  });
-
-  it('Tests table number formatting with % in metric name', () => {
-    const formData = {
-      ...VIZ_DEFAULTS,
-      percent_metrics: PERCENT_METRIC,
-      groupby: ['state'],
-    };
-
-    cy.visitChartByParams(formData);
-    cy.verifySliceSuccess({
-      waitAlias: '@chartData',
-      querySubstring: /GROUP BY.*state/i,
-      chartSelector: 'table',
-    });
-    cy.get('td').contains(/\d*%/);
-  });
-
-  it('Test row limit with server pagination toggle', () => {
-    const serverPaginationSelector =
-      '[data-test="server_pagination-header"] div.pull-left [type="checkbox"]';
-    cy.visitChartByParams({
-      ...VIZ_DEFAULTS,
-      metrics: ['count'],
-      row_limit: 100,
-    });
-
-    // Enable server pagination
-    cy.get(serverPaginationSelector).click();
-
-    // Click row limit control and select high value (200k)
-    cy.get('div[aria-label="Row limit"]').click();
-
-    // Type 200000 and press enter to select the option
-    cy.get('div[aria-label="Row limit"]')
-      .find('.ant-select-selection-search-input:visible')
-      .type('200000{enter}');
-
-    // Verify that there is no error tooltip when server pagination is enabled
-    cy.get('[data-test="error-tooltip"]').should('not.exist');
-
-    // Disable server pagination
-    cy.get(serverPaginationSelector).click();
-
-    // Verify error tooltip appears
-    cy.get('[data-test="error-tooltip"]').should('be.visible');
-
-    // Trigger mouseover and verify tooltip text
-    cy.get('[data-test="error-tooltip"]').trigger('mouseover');
-
-    // Verify tooltip content
-    cy.get('.ant-tooltip-inner').should('be.visible');
-    cy.get('.ant-tooltip-inner').should(
-      'contain',
-      'Server pagination needs to be enabled for values over',
-    );
-
-    // Hide the tooltip by adding display:none style
-    cy.get('.ant-tooltip').invoke('attr', 'style', 'display: none');
-
-    // Enable server pagination again
-    cy.get(serverPaginationSelector).click();
-
-    cy.get('[data-test="error-tooltip"]').should('not.exist');
-
-    cy.get('div[aria-label="Row limit"]').click();
-
-    // Type 1000000
-    cy.get('div[aria-label="Row limit"]')
-      .find('.ant-select-selection-search-input:visible')
-      .type('1000000');
-
-    // Wait for 1 second
-    cy.wait(1000);
-
-    // Press enter
-    cy.get('div[aria-label="Row limit"]')
-      .find('.ant-select-selection-search-input:visible')
-      .type('{enter}');
-
-    // Wait for error tooltip to appear and verify its content
-    cy.get('[data-test="error-tooltip"]')
-      .should('be.visible')
-      .trigger('mouseover');
-
-    // Wait for tooltip content and verify
-    cy.get('.ant-tooltip-inner').should('exist');
-    cy.get('.ant-tooltip-inner').should('be.visible');
-
-    // Verify tooltip content separately
-    cy.get('.ant-tooltip-inner').should('contain', 'Value cannot exceed');
-  });
-
-  it('Test sorting with server pagination enabled', () => {
-    cy.visitChartByParams({
-      ...VIZ_DEFAULTS,
-      metrics: ['count'],
-      groupby: ['name'],
-      row_limit: 100000,
-      server_pagination: true, // Enable server pagination
-    });
-
-    // Wait for the initial data load
-    cy.wait('@chartData');
-
-    // Get the first column header (name)
-    cy.get('.chart-container th').contains('name').as('nameHeader');
-
-    // Click to sort ascending
-    cy.get('@nameHeader').click();
-    cy.wait('@chartData');
-
-    // Verify first row starts with 'A'
-    cy.get('.chart-container td:first').invoke('text').should('match', /^[Aa]/);
-
-    // Click again to sort descending
-    cy.get('@nameHeader').click();
-    cy.wait('@chartData');
-
-    // Verify first row starts with 'Z'
-    cy.get('.chart-container td:first').invoke('text').should('match', /^[Zz]/);
-
-    // Test numeric sorting
-    cy.get('.chart-container th').contains('COUNT').as('countHeader');
-
-    // Click to sort ascending by count
-    cy.get('@countHeader').click();
-    cy.wait('@chartData');
-
-    // Get first two count values and verify ascending order
-    cy.get('.chart-container td:nth-child(2)').then($cells => {
-      const first = parseFloat($cells[0].textContent || '0');
-      const second = parseFloat($cells[1].textContent || '0');
-      expect(first).to.be.at.most(second);
-    });
-
-    // Click again to sort descending
-    cy.get('@countHeader').click();
-    cy.wait('@chartData');
-
-    // Get first two count values and verify descending order
-    cy.get('.chart-container td:nth-child(2)').then($cells => {
-      const first = parseFloat($cells[0].textContent || '0');
-      const second = parseFloat($cells[1].textContent || '0');
-      expect(first).to.be.at.least(second);
-    });
-  });
-
-  it('Test search with server pagination enabled', () => {
-    cy.visitChartByParams({
-      ...VIZ_DEFAULTS,
-      metrics: ['count'],
-      groupby: ['name', 'state'],
-      row_limit: 100000,
-      server_pagination: true,
-      include_search: true,
-    });
-
-    cy.wait('@chartData');
-
-    const searchInputSelector = '.dt-global-filter input';
-
-    // Basic search test
-    cy.get(searchInputSelector).should('be.visible');
-
-    cy.get(searchInputSelector).type('John');
-
-    cy.wait('@chartData');
-
-    cy.get('.chart-container tbody tr').each($row => {
-      cy.wrap($row).contains(/John/i);
-    });
-
-    // Clear and test case-insensitive search
-    cy.get(searchInputSelector).clear();
-
-    cy.wait('@chartData');
-
-    cy.get(searchInputSelector).type('mary');
-
-    cy.wait('@chartData');
-
-    cy.get('.chart-container tbody tr').each($row => {
-      cy.wrap($row).contains(/Mary/i);
-    });
-
-    // Test special characters
-    cy.get(searchInputSelector).clear();
-
-    cy.get(searchInputSelector).type('Nicole');
-
-    cy.wait('@chartData');
-
-    cy.get('.chart-container tbody tr').each($row => {
-      cy.wrap($row).contains(/Nicole/i);
-    });
-
-    // Test no results
-    cy.get(searchInputSelector).clear();
-
-    cy.get(searchInputSelector).type('XYZ123');
-
-    cy.wait('@chartData');
-
-    cy.get('.chart-container').contains('No records found');
-
-    // Test column-specific search
-    cy.get('.search-select').should('be.visible');
-
-    cy.get('.search-select').click();
-
-    cy.get('.ant-select-dropdown').should('be.visible');
-
-    cy.get('.ant-select-item-option').contains('state').should('be.visible');
-
-    cy.get('.ant-select-item-option').contains('state').click();
-
-    cy.get(searchInputSelector).clear();
-
-    cy.get(searchInputSelector).type('CA');
-
-    cy.wait('@chartData');
-    cy.wait(1000);
-
-    cy.get('td[aria-labelledby="header-state"]').should('be.visible');
-
-    cy.get('td[aria-labelledby="header-state"]')
-      .first()
-      .should('contain', 'CA');
-  });
-});

superset-frontend/cypress-base/cypress/e2e/explore/visualizations/_skip.time_table.js

@@ -1,130 +0,0 @@
-/**
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-import { FORM_DATA_DEFAULTS, NUM_METRIC } from './shared.helper';
-
-describe('Visualization > Time TableViz', () => {
-  beforeEach(() => {
-    cy.intercept('POST', '**/superset/explore_json/**').as('getJson');
-  });
-
-  const VIZ_DEFAULTS = { ...FORM_DATA_DEFAULTS, viz_type: 'time_table' };
-
-  it('Test time series table multiple metrics last year total', () => {
-    const formData = {
-      ...VIZ_DEFAULTS,
-      metrics: [NUM_METRIC, 'count'],
-      column_collection: [
-        {
-          key: '9g4K-B-YL',
-          label: 'Last Year',
-          colType: 'time',
-          timeLag: '1',
-          comparisonType: 'value',
-        },
-      ],
-      url: '',
-    };
-
-    cy.visitChartByParams(formData);
-    cy.verifySliceSuccess({
-      waitAlias: '@getJson',
-      querySubstring: NUM_METRIC.label,
-    });
-    cy.get('[data-test="time-table"]').within(() => {
-      cy.get('span').contains('Sum(num)');
-      cy.get('span').contains('COUNT(*)');
-    });
-  });
-
-  it('Test time series table metric and group by last year total', () => {
-    const formData = {
-      ...VIZ_DEFAULTS,
-      metrics: [NUM_METRIC],
-      groupby: ['gender'],
-      column_collection: [
-        {
-          key: '9g4K-B-YL',
-          label: 'Last Year',
-          colType: 'time',
-          timeLag: '1',
-          comparisonType: 'value',
-        },
-      ],
-      url: '',
-    };
-
-    cy.visitChartByParams(formData);
-    cy.verifySliceSuccess({
-      waitAlias: '@getJson',
-      querySubstring: NUM_METRIC.label,
-    });
-    cy.get('[data-test="time-table"]').within(() => {
-      cy.get('td').contains('boy');
-      cy.get('td').contains('girl');
-    });
-  });
-
-  it('Test time series various time columns', () => {
-    const formData = {
-      ...VIZ_DEFAULTS,
-      metrics: [NUM_METRIC, 'count'],
-      column_collection: [
-        { key: 'LHHNPhamU', label: 'Current', colType: 'time', timeLag: 0 },
-        {
-          key: '9g4K-B-YL',
-          label: 'Last Year',
-          colType: 'time',
-          timeLag: '1',
-          comparisonType: 'value',
-        },
-        {
-          key: 'JVZXtNu7_',
-          label: 'YoY',
-          colType: 'time',
-          timeLag: 1,
-          comparisonType: 'perc',
-          d3format: '%',
-        },
-        { key: 'tN5Gba36u', label: 'Trend', colType: 'spark' },
-      ],
-      url: '',
-    };
-
-    cy.visitChartByParams(formData);
-    cy.verifySliceSuccess({
-      waitAlias: '@getJson',
-      querySubstring: NUM_METRIC.label,
-    });
-    cy.get('[data-test="time-table"]').within(() => {
-      cy.get('th').contains('Current');
-      cy.get('th').contains('Last Year');
-      cy.get('th').contains('YoY');
-      cy.get('th').contains('Trend');
-
-      cy.get('span').contains('%');
-      cy.get('svg')
-        .first()
-        .then(charts => {
-          const firstChart = charts[0];
-          expect(firstChart.clientWidth).greaterThan(0);
-          expect(firstChart.clientHeight).greaterThan(0);
-        });
-    });
-  });
-});

superset-frontend/cypress-base/cypress/e2e/explore/visualizations/_skip.world_map.test.js

@@ -1,95 +0,0 @@
-/**
- * Licensed to the Apache Software Foundation (ASF) under one
- * or more contributor license agreements.  See the NOTICE file
- * distributed with this work for additional information
- * regarding copyright ownership.  The ASF licenses this file
- * to you under the Apache License, Version 2.0 (the
- * "License"); you may not use this file except in compliance
- * with the License.  You may obtain a copy of the License at
- *
- *   http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing,
- * software distributed under the License is distributed on an
- * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
- * KIND, either express or implied.  See the License for the
- * specific language governing permissions and limitations
- * under the License.
- */
-describe('Visualization > World Map', () => {
-  beforeEach(() => {
-    cy.intercept('POST', '**/superset/explore_json/**').as('getJson');
-  });
-
-  const WORLD_MAP_FORM_DATA = {
-    datasource: '2__table',
-    viz_type: 'world_map',
-    slice_id: 45,
-    granularity_sqla: 'year',
-    time_grain_sqla: 'P1D',
-    time_range: '2014-01-01 : 2014-01-02',
-    entity: 'country_code',
-    country_fieldtype: 'cca3',
-    metric: 'sum__SP_RUR_TOTL_ZS',
-    adhoc_filters: [],
-    row_limit: 50000,
-    show_bubbles: true,
-    secondary_metric: 'sum__SP_POP_TOTL',
-    max_bubble_size: '25',
-  };
-
-  function verify(formData) {
-    cy.visitChartByParams(formData);
-    cy.verifySliceSuccess({ waitAlias: '@getJson', chartSelector: 'svg' });
-  }
-
-  it('should work with ad-hoc metric', () => {
-    verify(WORLD_MAP_FORM_DATA);
-    cy.get('.bubbles circle.datamaps-bubble').should('have.length', 206);
-  });
-
-  it('should work with simple filter', () => {
-    verify({
-      ...WORLD_MAP_FORM_DATA,
-      metric: 'count',
-      adhoc_filters: [
-        {
-          expressionType: 'SIMPLE',
-          subject: 'region',
-          operator: '==',
-          comparator: 'South Asia',
-          clause: 'WHERE',
-          sqlExpression: null,
-          filterOptionName: 'filter_8aqxcf5co1a_x7lm2d1fq0l',
-        },
-      ],
-    });
-    cy.get('.bubbles circle.datamaps-bubble').should('have.length', 8);
-  });
-
-  it('should hide bubbles when told so', () => {
-    verify({
-      ...WORLD_MAP_FORM_DATA,
-      show_bubbles: false,
-    });
-    cy.get('.slice_container').then(containers => {
-      expect(
-        containers[0].querySelectorAll('.bubbles circle.datamaps-bubble')
-          .length,
-      ).to.equal(0);
-    });
-  });
-
-  it('should allow type to search color schemes', () => {
-    verify(WORLD_MAP_FORM_DATA);
-
-    cy.get('.Control[data-test="linear_color_scheme"]').scrollIntoView();
-    cy.get(
-      '.Control[data-test="linear_color_scheme"] input[type="search"]',
-    ).focus();
-    cy.focused().type('greens{enter}');
-    cy.get(
-      '.Control[data-test="linear_color_scheme"] .ant-select-selection-item [data-test="greens"]',
-    ).should('exist');
-  });
-});

superset-frontend/oxlint.json

@@ -39,7 +39,7 @@
     // oxlint versions (not actually enforced). Documented here for future
     // maintainers — if/when oxlint adds them, re-enable in the relevant
     // plugin section above.
-    //   import: newline-after-import, no-extraneous-dependencies,
+    //   import: no-extraneous-dependencies,
     //           no-import-module-exports, no-relative-packages,
     //           no-unresolved, no-useless-path-segments
     //   react:  default-props-match-prop-types, destructuring-assignment,
@@ -47,7 +47,6 @@
     //           forbid-prop-types, function-component-definition,
     //           jsx-no-bind, jsx-uses-vars, no-access-state-in-setstate,
     //           no-deprecated, no-did-update-set-state, no-typos,
-    //           no-unstable-nested-components,
     //           no-unused-class-component-methods, no-unused-prop-types,
     //           no-unused-state, prefer-stateless-function, prop-types,
     //           require-default-props, sort-comp, static-property-placement
@@ -137,6 +136,7 @@
     "import/no-self-import": "error",
     "import/no-cycle": "off",
     "import/prefer-default-export": "off",
+    "import/newline-after-import": "error",
 
     // === React plugin rules ===
     "react/jsx-filename-extension": [
@@ -184,6 +184,10 @@
       "error",
       { "button": true, "submit": true, "reset": false }
     ],
+    // TODO: Graduate to "error" after cleanup pass — ~150 violations
+    // across the codebase require hoisting nested component definitions
+    // out of their parent render functions.
+    "react/no-unstable-nested-components": "warn",
 
     // === React Hooks rules ===
     // TODO: Fix conditional hook usage and anonymous component issues
@@ -271,7 +275,10 @@
   },
   "overrides": [
     {
-      "files": ["plugins/plugin-chart-table/src/TableChart.tsx", "plugins/plugin-chart-pivot-table/src/react-pivottable/TableRenderers.tsx"],
+      "files": [
+        "plugins/plugin-chart-table/src/TableChart.tsx",
+        "plugins/plugin-chart-pivot-table/src/react-pivottable/TableRenderers.tsx"
+      ],
       "rules": {
         "jsx-a11y/no-redundant-roles": "off"
       }

superset-frontend/package-lock.json

@@ -31,7 +31,7 @@
         "@fontsource/fira-code": "^5.2.7",
         "@fontsource/ibm-plex-mono": "^5.2.7",
         "@fontsource/inter": "^5.2.8",
-        "@googleapis/sheets": "^13.0.1",
+        "@googleapis/sheets": "^13.0.2",
         "@great-expectations/jsonforms-antd-renderers": "^2.2.10",
         "@jsonforms/core": "^3.7.0",
         "@jsonforms/react": "^3.7.0",
@@ -96,7 +96,7 @@
         "fs-extra": "^11.3.5",
         "fuse.js": "^7.3.0",
         "geolib": "^3.3.14",
-        "geostyler": "^18.5.1",
+        "geostyler": "^18.6.0",
         "geostyler-data": "^1.1.0",
         "geostyler-openlayers-parser": "^5.7.0",
         "geostyler-style": "11.0.2",
@@ -121,7 +121,7 @@
         "query-string": "9.3.1",
         "re-resizable": "^6.11.2",
         "react": "^18.2.0",
-        "react-arborist": "^3.6.1",
+        "react-arborist": "^3.7.0",
         "react-checkbox-tree": "^1.8.0",
         "react-diff-viewer-continued": "^4.2.2",
         "react-dnd": "^11.1.3",
@@ -195,7 +195,7 @@
         "@storybook/test-runner": "^0.17.0",
         "@svgr/webpack": "^8.1.0",
         "@swc/core": "^1.15.33",
-        "@swc/plugin-emotion": "^14.9.0",
+        "@swc/plugin-emotion": "^14.10.0",
         "@swc/plugin-transform-imports": "^12.5.0",
         "@testing-library/dom": "^9.3.4",
         "@testing-library/jest-dom": "^6.9.1",
@@ -229,7 +229,7 @@
         "babel-plugin-dynamic-import-node": "^2.3.3",
         "babel-plugin-jsx-remove-data-test-id": "^3.0.0",
         "babel-plugin-lodash": "^3.3.4",
-        "baseline-browser-mapping": "^2.10.29",
+        "baseline-browser-mapping": "^2.10.31",
         "cheerio": "1.2.0",
         "concurrently": "^9.2.1",
         "copy-webpack-plugin": "^14.0.0",
@@ -284,14 +284,14 @@
         "style-loader": "^4.0.0",
         "swc-loader": "^0.2.7",
         "terser-webpack-plugin": "^5.6.0",
-        "ts-jest": "^29.4.10",
+        "ts-jest": "^29.4.11",
         "tscw-config": "^1.1.2",
         "tsx": "^4.22.3",
         "typescript": "5.4.5",
         "unzipper": "^0.12.3",
         "vm-browserify": "^1.1.2",
         "wait-on": "^9.0.10",
-        "webpack": "^5.106.2",
+        "webpack": "^5.107.1",
         "webpack-bundle-analyzer": "^5.3.0",
         "webpack-cli": "^6.0.1",
         "webpack-dev-server": "^5.2.4",
@@ -3958,9 +3958,9 @@
       }
     },
     "node_modules/@googleapis/sheets": {
-      "version": "13.0.1",
-      "resolved": "https://registry.npmjs.org/@googleapis/sheets/-/sheets-13.0.1.tgz",
-      "integrity": "sha512-XTYObncN5Rqexc0uITZIN9OWTEyE/ZR2S6c7wAniqHe2oGXW9gcHR9f9hQwPMHFUTHjH7Jkj8SLdt0O0u37y2A==",
+      "version": "13.0.2",
+      "resolved": "https://registry.npmjs.org/@googleapis/sheets/-/sheets-13.0.2.tgz",
+      "integrity": "sha512-b1tBlMcfvNEziM4DZCikLOc9iqSlgCK1e5bMKtNQIADRXr1CQmbkHV3ZBVvTsFsjLErgihqO58Itn/kzCnSZ0A==",
       "license": "Apache-2.0",
       "dependencies": {
         "googleapis-common": "^8.0.0"
@@ -12568,9 +12568,9 @@
       }
     },
     "node_modules/@swc/plugin-emotion": {
-      "version": "14.9.0",
-      "resolved": "https://registry.npmjs.org/@swc/plugin-emotion/-/plugin-emotion-14.9.0.tgz",
-      "integrity": "sha512-h57mL/TsOrhimvHs6KQQLZO1T+D7FQyx+7WS17p9vV228qxmZatF0IgEXMyERWthm1QL7fAB6cEMBCtujSVbyw==",
+      "version": "14.10.0",
+      "resolved": "https://registry.npmjs.org/@swc/plugin-emotion/-/plugin-emotion-14.10.0.tgz",
+      "integrity": "sha512-uhPq0oJHk2/W2Hn6vLaNmbUUgNPPj0FINHISxfs9hqS2Hpv/TVzQFsnbxul1FJEa+YQe1Qebou2esDphwzIuKg==",
       "dev": true,
       "license": "Apache-2.0",
       "dependencies": {
@@ -13164,22 +13164,13 @@
       "integrity": "sha512-FXx2pKgId/WyYo2jXw63kk7/+TY7u7AziEJxJAnSFzHlqTAS3Ync6SvgYAN/k4/PQpnnVuzoMuVnByKK2qp0ag==",
       "dev": true,
       "license": "MIT",
+      "optional": true,
+      "peer": true,
       "dependencies": {
         "@types/estree": "*",
         "@types/json-schema": "*"
       }
     },
-    "node_modules/@types/eslint-scope": {
-      "version": "3.7.7",
-      "resolved": "https://registry.npmjs.org/@types/eslint-scope/-/eslint-scope-3.7.7.tgz",
-      "integrity": "sha512-MzMFlSLBqNF2gcHWO0G1vP/YQyfvrxZ0bF+u7mzUdZ1/xK4A4sru+nraZz5i3iEIk1l1uyicaDVTB4QbbEkAYg==",
-      "dev": true,
-      "license": "MIT",
-      "dependencies": {
-        "@types/eslint": "*",
-        "@types/estree": "*"
-      }
-    },
     "node_modules/@types/estree": {
       "version": "1.0.8",
       "resolved": "https://registry.npmjs.org/@types/estree/-/estree-1.0.8.tgz",
@@ -17218,9 +17209,9 @@
       "license": "MIT"
     },
     "node_modules/baseline-browser-mapping": {
-      "version": "2.10.29",
-      "resolved": "https://registry.npmjs.org/baseline-browser-mapping/-/baseline-browser-mapping-2.10.29.tgz",
-      "integrity": "sha512-Asa2krT+XTPZINCS+2QcyS8WTkObE77RwkydwF7h6DmnKqbvlalz93m/dnphUyCa6SWSP51VgtEUf2FN+gelFQ==",
+      "version": "2.10.31",
+      "resolved": "https://registry.npmjs.org/baseline-browser-mapping/-/baseline-browser-mapping-2.10.31.tgz",
+      "integrity": "sha512-MujYO3eP72uvmSE0i4wltsodRfIpZATP3jvzRNRGGxgzId7aVocVJJV3nf01qnzzKFGxQVC9bpWxl5cjxTr/7Q==",
       "dev": true,
       "license": "Apache-2.0",
       "bin": {
@@ -21827,14 +21818,14 @@
       }
     },
     "node_modules/enhanced-resolve": {
-      "version": "5.20.0",
-      "resolved": "https://registry.npmjs.org/enhanced-resolve/-/enhanced-resolve-5.20.0.tgz",
-      "integrity": "sha512-/ce7+jQ1PQ6rVXwe+jKEg5hW5ciicHwIQUagZkp6IufBoY3YDgdTTY1azVs0qoRgVmvsNB+rbjLJxDAeHHtwsQ==",
+      "version": "5.21.6",
+      "resolved": "https://registry.npmjs.org/enhanced-resolve/-/enhanced-resolve-5.21.6.tgz",
+      "integrity": "sha512-aNnGCvbJ/RIyWo1IuhNdVjnNF+EjH9wpzpNHt+ci/m9He9LJvUN8wrCcXjp9cWsGNAuvSpVFTx/vraAFQ8qGjQ==",
       "dev": true,
       "license": "MIT",
       "dependencies": {
         "graceful-fs": "^4.2.4",
-        "tapable": "^2.3.0"
+        "tapable": "^2.3.3"
       },
       "engines": {
         "node": ">=10.13.0"
@@ -24541,9 +24532,9 @@
       "license": "MIT"
     },
     "node_modules/geostyler": {
-      "version": "18.5.1",
-      "resolved": "https://registry.npmjs.org/geostyler/-/geostyler-18.5.1.tgz",
-      "integrity": "sha512-5+vLuDo1oR4QQTnrfkccIQSe3qEn0ytV9dLiFFhnxhPdziv/Wp3vKNhJZ37MUF5yIj2ISWZ+q/VmSNH6ifvWpg==",
+      "version": "18.6.0",
+      "resolved": "https://registry.npmjs.org/geostyler/-/geostyler-18.6.0.tgz",
+      "integrity": "sha512-q8x5V4yJlTFOIe5LSvhEHd62MrMJq1YXWJVTeAG2TUMgOudjrcglXDqKtFYtEdWHeORH6TXz7q+m6cg3RlZqAg==",
       "license": "BSD-2-Clause",
       "dependencies": {
         "@ant-design/icons": "^5.5.1",
@@ -32537,9 +32528,9 @@
       }
     },
     "node_modules/loader-runner": {
-      "version": "4.3.1",
-      "resolved": "https://registry.npmjs.org/loader-runner/-/loader-runner-4.3.1.tgz",
-      "integrity": "sha512-IWqP2SCPhyVFTBtRcgMHdzlf9ul25NwaFx4wCEH/KjAXuuHY4yNjvPXsBokp8jCB936PyWRaPKUNh8NvylLp2Q==",
+      "version": "4.3.2",
+      "resolved": "https://registry.npmjs.org/loader-runner/-/loader-runner-4.3.2.tgz",
+      "integrity": "sha512-DFEqQ3ihfS9blba08cLfYf1NRAIEm+dDjic073DRDc3/JspI/8wYmtDsHwd3+4hwvdxSK7PGaElfTmm0awWJ4w==",
       "dev": true,
       "license": "MIT",
       "engines": {
@@ -40280,9 +40271,9 @@
       }
     },
     "node_modules/react-arborist": {
-      "version": "3.6.1",
-      "resolved": "https://registry.npmjs.org/react-arborist/-/react-arborist-3.6.1.tgz",
-      "integrity": "sha512-h2/sPz6PXL79h7mOWjCA6Y5WNUKmA0kL8Uh6RYZQbYk7UOFBd86Jeoga4RjHMBYpOWpBPYrOJOE3HbIPUETp8w==",
+      "version": "3.7.0",
+      "resolved": "https://registry.npmjs.org/react-arborist/-/react-arborist-3.7.0.tgz",
+      "integrity": "sha512-gh2SoO0eXQVSP6zxXMGqFeXF+l2uabDGBVn0+RKqy/s7mrG5xGnfM5mhyB67cMVobC3vWYLqe6HGh7ZEZadW/w==",
       "license": "MIT",
       "dependencies": {
         "react-dnd": "^14.0.3",
@@ -44459,9 +44450,9 @@
       }
     },
     "node_modules/tapable": {
-      "version": "2.3.0",
-      "resolved": "https://registry.npmjs.org/tapable/-/tapable-2.3.0.tgz",
-      "integrity": "sha512-g9ljZiwki/LfxmQADO3dEY1CbpmXT5Hm2fJ+QaGKwSXUylMybePR7/67YW7jOrrvjEgL1Fmz5kzyAjWVWLlucg==",
+      "version": "2.3.3",
+      "resolved": "https://registry.npmjs.org/tapable/-/tapable-2.3.3.tgz",
+      "integrity": "sha512-uxc/zpqFg6x7C8vOE7lh6Lbda8eEL9zmVm/PLeTPBRhh1xCgdWaQ+J1CUieGpIfm2HdtsUpRv+HshiasBMcc6A==",
       "dev": true,
       "license": "MIT",
       "engines": {
@@ -45223,9 +45214,9 @@
       }
     },
     "node_modules/ts-jest": {
-      "version": "29.4.10",
-      "resolved": "https://registry.npmjs.org/ts-jest/-/ts-jest-29.4.10.tgz",
-      "integrity": "sha512-vMTlTTtvz5aKZgzOoc7DQ5TzAL2fCzl8JnG1+ZpwjQa/g0xLlwE44yQ+1Cao9ZP1xVv9y5g34IFXEiqGOGFBUA==",
+      "version": "29.4.11",
+      "resolved": "https://registry.npmjs.org/ts-jest/-/ts-jest-29.4.11.tgz",
+      "integrity": "sha512-IrFl7l9AuB/qrNw5quqvAv/hmKMb8dhWOH4jQOGo0Oq8tCeo1O86/iTFG1FaRimgUkF13l4PcepO8ATFT6Ns4g==",
       "dev": true,
       "license": "MIT",
       "dependencies": {
@@ -47366,13 +47357,12 @@
       }
     },
     "node_modules/webpack": {
-      "version": "5.106.2",
-      "resolved": "https://registry.npmjs.org/webpack/-/webpack-5.106.2.tgz",
-      "integrity": "sha512-wGN3qcrBQIFmQ/c0AiOAQBvrZ5lmY8vbbMv4Mxfgzqd/B6+9pXtLo73WuS1dSGXM5QYY3hZnIbvx+K1xxe6FyA==",
+      "version": "5.107.1",
+      "resolved": "https://registry.npmjs.org/webpack/-/webpack-5.107.1.tgz",
+      "integrity": "sha512-mvdIWxj/H6QsfgDdH9djne3a5dYcmEmtsXGESkypaGN5jXjF/b+9KDlmTDQ2TKlFUeA2fI9Y65kihD30JOdB+Q==",
       "dev": true,
       "license": "MIT",
       "dependencies": {
-        "@types/eslint-scope": "^3.7.7",
         "@types/estree": "^1.0.8",
         "@types/json-schema": "^7.0.15",
         "@webassemblyjs/ast": "^1.14.1",
@@ -47382,20 +47372,20 @@
         "acorn-import-phases": "^1.0.3",
         "browserslist": "^4.28.1",
         "chrome-trace-event": "^1.0.2",
-        "enhanced-resolve": "^5.20.0",
-        "es-module-lexer": "^2.0.0",
+        "enhanced-resolve": "^5.21.4",
+        "es-module-lexer": "^2.1.0",
         "eslint-scope": "5.1.1",
         "events": "^3.2.0",
         "glob-to-regexp": "^0.4.1",
         "graceful-fs": "^4.2.11",
-        "loader-runner": "^4.3.1",
+        "loader-runner": "^4.3.2",
         "mime-db": "^1.54.0",
         "neo-async": "^2.6.2",
         "schema-utils": "^4.3.3",
         "tapable": "^2.3.0",
-        "terser-webpack-plugin": "^5.3.17",
+        "terser-webpack-plugin": "^5.5.0",
         "watchpack": "^2.5.1",
-        "webpack-sources": "^3.3.4"
+        "webpack-sources": "^3.4.1"
       },
       "bin": {
         "webpack": "bin/webpack.js"
@@ -48910,7 +48900,7 @@
       "dependencies": {
         "chalk": "^5.6.2",
         "lodash-es": "^4.18.1",
-        "yeoman-generator": "^8.2.2",
+        "yeoman-generator": "^8.1.2",
         "yosay": "^3.0.0"
       },
       "devDependencies": {
@@ -49983,7 +49973,7 @@
         "acorn": "^8.16.0",
         "d3-array": "^3.2.4",
         "lodash": "^4.18.1",
-        "zod": "^4.4.1"
+        "zod": "^4.4.3"
       },
       "peerDependencies": {
         "@apache-superset/core": "*",
@@ -50095,7 +50085,7 @@
         "@math.gl/web-mercator": "^4.1.0",
         "mapbox-gl": "^3.24.0",
         "maplibre-gl": "^5.24.0",
-        "react-map-gl": "^8.1.1",
+        "react-map-gl": "^8.1.0",
         "supercluster": "^8.0.1"
       },
       "peerDependencies": {
@@ -50184,7 +50174,7 @@
       "license": "Apache-2.0",
       "dependencies": {
         "@types/d3-scale": "^4.0.9",
-        "d3-cloud": "^1.2.9",
+        "d3-cloud": "^1.2.8",
         "d3-scale": "^4.0.2"
       },
       "devDependencies": {

superset-frontend/package.json

@@ -43,6 +43,8 @@
     "build-instrumented": "cross-env NODE_ENV=production BABEL_ENV=instrumented webpack --mode=production --color",
     "build-storybook": "storybook build",
     "build-translation": "scripts/po2json.sh",
+    "translations:build-index": "python3 ../scripts/translations/build_translation_index.py",
+    "translations:backfill": "python3 ../scripts/translations/backfill_po.py",
     "bundle-stats": "cross-env BUNDLE_ANALYZER=true npm run build && npx open-cli ../superset/static/stats/statistics.html",
     "clear-npm": "mkdir -p /tmp/empty && rsync -a --delete /tmp/empty/ node_modules/ && rmdir node_modules /tmp/empty",
     "core:cover": "cross-env NODE_ENV=test NODE_OPTIONS=\"--max-old-space-size=4096\" jest --coverage --coverageThreshold='{\"global\":{\"statements\":100,\"branches\":100,\"functions\":100,\"lines\":100}}' --collectCoverageFrom='[\"packages/**/src/**/*.{js,ts}\", \"!packages/superset-core/**/*\"]' packages",
@@ -112,7 +114,7 @@
     "@fontsource/fira-code": "^5.2.7",
     "@fontsource/ibm-plex-mono": "^5.2.7",
     "@fontsource/inter": "^5.2.8",
-    "@googleapis/sheets": "^13.0.1",
+    "@googleapis/sheets": "^13.0.2",
     "@great-expectations/jsonforms-antd-renderers": "^2.2.10",
     "@jsonforms/core": "^3.7.0",
     "@jsonforms/react": "^3.7.0",
@@ -177,7 +179,7 @@
     "fs-extra": "^11.3.5",
     "fuse.js": "^7.3.0",
     "geolib": "^3.3.14",
-    "geostyler": "^18.5.1",
+    "geostyler": "^18.6.0",
     "geostyler-data": "^1.1.0",
     "geostyler-openlayers-parser": "^5.7.0",
     "geostyler-style": "11.0.2",
@@ -202,7 +204,7 @@
     "query-string": "9.3.1",
     "re-resizable": "^6.11.2",
     "react": "^18.2.0",
-    "react-arborist": "^3.6.1",
+    "react-arborist": "^3.7.0",
     "react-checkbox-tree": "^1.8.0",
     "react-diff-viewer-continued": "^4.2.2",
     "react-dnd": "^11.1.3",
@@ -276,7 +278,7 @@
     "@storybook/test-runner": "^0.17.0",
     "@svgr/webpack": "^8.1.0",
     "@swc/core": "^1.15.33",
-    "@swc/plugin-emotion": "^14.9.0",
+    "@swc/plugin-emotion": "^14.10.0",
     "@swc/plugin-transform-imports": "^12.5.0",
     "@testing-library/dom": "^9.3.4",
     "@testing-library/jest-dom": "^6.9.1",
@@ -310,7 +312,7 @@
     "babel-plugin-dynamic-import-node": "^2.3.3",
     "babel-plugin-jsx-remove-data-test-id": "^3.0.0",
     "babel-plugin-lodash": "^3.3.4",
-    "baseline-browser-mapping": "^2.10.29",
+    "baseline-browser-mapping": "^2.10.31",
     "cheerio": "1.2.0",
     "concurrently": "^9.2.1",
     "copy-webpack-plugin": "^14.0.0",
@@ -365,14 +367,14 @@
     "style-loader": "^4.0.0",
     "swc-loader": "^0.2.7",
     "terser-webpack-plugin": "^5.6.0",
-    "ts-jest": "^29.4.10",
+    "ts-jest": "^29.4.11",
     "tscw-config": "^1.1.2",
     "tsx": "^4.22.3",
     "typescript": "5.4.5",
     "unzipper": "^0.12.3",
     "vm-browserify": "^1.1.2",
     "wait-on": "^9.0.10",
-    "webpack": "^5.106.2",
+    "webpack": "^5.107.1",
     "webpack-bundle-analyzer": "^5.3.0",
     "webpack-cli": "^6.0.1",
     "webpack-dev-server": "^5.2.4",

superset-frontend/packages/generator-superset/package.json

@@ -30,7 +30,7 @@
   "dependencies": {
     "chalk": "^5.6.2",
     "lodash-es": "^4.18.1",
-    "yeoman-generator": "^8.2.2",
+    "yeoman-generator": "^8.1.2",
     "yosay": "^3.0.0"
   },
   "devDependencies": {

superset-frontend/packages/superset-ui-core/src/chart/components/SuperChart.tsx

@@ -48,6 +48,7 @@ import NoResultsComponent from './NoResultsComponent';
 import { isMatrixifyEnabled } from '../types/matrixify';
 import MatrixifyGridRenderer from './Matrixify/MatrixifyGridRenderer';
 import { supersetTheme, SupersetTheme } from '@apache-superset/core/theme';
+
 export type FallbackPropsWithDimension = FallbackProps & Partial<Dimension>;
 
 export type WrapperProps = Dimension & {

superset-frontend/packages/superset-ui-core/src/components/Select/AsyncSelect.test.tsx

@@ -897,6 +897,476 @@ test('fires onChange when pasting a selection', async () => {
   await waitFor(() => expect(onChange).toHaveBeenCalledTimes(1));
 });
 
+test('replaces cached options with search results instead of merging', async () => {
+  const page0Data = Array.from({ length: 10 }, (_, i) => ({
+    label: `Option ${i}`,
+    value: i,
+  }));
+  const searchData = [{ label: 'Search Match', value: 100 }];
+  const loadOptions = jest.fn(async (search: string) => {
+    if (search === '') {
+      return { data: page0Data, totalCount: 100 };
+    }
+    return { data: searchData, totalCount: 1 };
+  });
+
+  render(<AsyncSelect {...defaultProps} options={loadOptions} />);
+  await open();
+  await waitFor(() => expect(loadOptions).toHaveBeenCalledTimes(1));
+
+  let options = await findAllSelectOptions();
+  expect(options).toHaveLength(10);
+
+  await type('search');
+  await waitFor(() => expect(loadOptions).toHaveBeenCalledTimes(2));
+
+  options = await findAllSelectOptions();
+  expect(options).toHaveLength(1);
+  expect(options[0]).toHaveTextContent('Search Match');
+});
+
+test('shows all options when filterOption is false', async () => {
+  const page0Data = Array.from({ length: 10 }, (_, i) => ({
+    label: `Base ${i}`,
+    value: i,
+  }));
+  const searchData = Array.from({ length: 5 }, (_, i) => ({
+    label: `Server ${i}`,
+    value: 100 + i,
+  }));
+  const loadOptions = jest.fn(async (search: string) =>
+    search === ''
+      ? { data: page0Data, totalCount: 100 }
+      : { data: searchData, totalCount: 5 },
+  );
+
+  render(
+    <AsyncSelect
+      {...defaultProps}
+      options={loadOptions}
+      filterOption={false}
+    />,
+  );
+  await open();
+  await waitFor(() => expect(loadOptions).toHaveBeenCalledTimes(1));
+
+  await type('zzz_no_match');
+  await waitFor(() => expect(loadOptions).toHaveBeenCalledTimes(2));
+
+  const options = await findAllSelectOptions();
+  expect(options).toHaveLength(5);
+  expect(options[0]).toHaveTextContent('Server 0');
+});
+
+test('preserves new option entry across search fetch when allowNewOptions is on', async () => {
+  const page0Data = Array.from({ length: 10 }, (_, i) => ({
+    label: `Option ${i}`,
+    value: i,
+  }));
+  const loadOptions = jest.fn(async (search: string) => {
+    if (search === '') {
+      return { data: page0Data, totalCount: 100 };
+    }
+    return { data: [], totalCount: 0 };
+  });
+
+  render(
+    <AsyncSelect {...defaultProps} options={loadOptions} allowNewOptions />,
+  );
+  await open();
+  await waitFor(() => expect(loadOptions).toHaveBeenCalledTimes(1));
+
+  await type('newval');
+  await waitFor(() => expect(loadOptions).toHaveBeenCalledTimes(2));
+
+  const options = await findAllSelectOptions();
+  expect(options).toHaveLength(1);
+  expect(options[0]).toHaveTextContent('newval');
+  // Stale page-0 options must not bleed through.
+  expect(screen.queryByText('Option 0')).not.toBeInTheDocument();
+});
+
+test('restores base options when search is cleared', async () => {
+  const page0Data = Array.from({ length: 10 }, (_, i) => ({
+    label: `Option ${i}`,
+    value: i,
+  }));
+  const searchData = [{ label: 'Search Match', value: 100 }];
+  const loadOptions = jest.fn(async (search: string) => {
+    if (search === '') {
+      return { data: page0Data, totalCount: 100 };
+    }
+    return { data: searchData, totalCount: 1 };
+  });
+
+  render(<AsyncSelect {...defaultProps} options={loadOptions} />);
+  await open();
+  await waitFor(() => expect(loadOptions).toHaveBeenCalledTimes(1));
+
+  await type('search');
+  await waitFor(() => expect(loadOptions).toHaveBeenCalledTimes(2));
+  let options = await findAllSelectOptions();
+  expect(options).toHaveLength(1);
+  expect(options[0]).toHaveTextContent('Search Match');
+
+  // type() clears the input before typing, so passing '' clears the search.
+  await type('');
+  await waitFor(async () => {
+    options = await findAllSelectOptions();
+    expect(options).toHaveLength(10);
+  });
+  expect(options[0]).toHaveTextContent('Option 0');
+  expect(screen.queryByText('Search Match')).not.toBeInTheDocument();
+});
+
+test('replaces results when switching between two searches', async () => {
+  const page0Data = Array.from({ length: 10 }, (_, i) => ({
+    label: `Option ${i}`,
+    value: i,
+  }));
+  const loadOptions = jest.fn(async (search: string) => {
+    if (search === '') {
+      return { data: page0Data, totalCount: 100 };
+    }
+    return {
+      data: [{ label: `Match-${search}`, value: `v-${search}` }],
+      totalCount: 1,
+    };
+  });
+
+  render(<AsyncSelect {...defaultProps} options={loadOptions} />);
+  await open();
+  await waitFor(() => expect(loadOptions).toHaveBeenCalledTimes(1));
+
+  await type('alpha');
+  await waitFor(async () => {
+    const options = await findAllSelectOptions();
+    expect(options).toHaveLength(1);
+    expect(options[0]).toHaveTextContent('Match-alpha');
+  });
+
+  await type('beta');
+  await waitFor(async () => {
+    const options = await findAllSelectOptions();
+    expect(options).toHaveLength(1);
+    expect(options[0]).toHaveTextContent('Match-beta');
+  });
+  expect(screen.queryByText('Match-alpha')).not.toBeInTheDocument();
+});
+
+test('refetches a dropped search response when the same search is repeated', async () => {
+  type OptionRow = { label: string; value: string | number };
+  type PageResponse = { data: OptionRow[]; totalCount: number };
+  // Resolves the in-flight loadOptions promise of the calling test.
+  let resolveAlpha: ((value: PageResponse) => void) | null = null;
+  const page0Data: OptionRow[] = Array.from({ length: 10 }, (_, i) => ({
+    label: `Option ${i}`,
+    value: i,
+  }));
+  const alphaData: OptionRow[] = [{ label: 'Match-alpha', value: 'va' }];
+  const betaData: OptionRow[] = [{ label: 'Match-beta', value: 'vb' }];
+
+  const loadOptions = jest.fn((search: string) => {
+    if (search === '') {
+      return Promise.resolve<PageResponse>({
+        data: page0Data,
+        totalCount: 100,
+      });
+    }
+    if (search === 'alpha') {
+      // First call: hold the promise so it resolves only after beta returns.
+      // Second call (after beta): resolve immediately so the cache MUST allow
+      // a refetch.
+      if (!resolveAlpha) {
+        return new Promise<PageResponse>(resolve => {
+          resolveAlpha = resolve;
+        });
+      }
+      return Promise.resolve<PageResponse>({ data: alphaData, totalCount: 1 });
+    }
+    return Promise.resolve<PageResponse>({ data: betaData, totalCount: 1 });
+  });
+
+  render(<AsyncSelect {...defaultProps} options={loadOptions} />);
+  await open();
+  await waitFor(() => expect(loadOptions).toHaveBeenCalledWith('', 0, 10));
+
+  await type('alpha');
+  await waitFor(() => expect(loadOptions).toHaveBeenCalledWith('alpha', 0, 10));
+  // alpha's promise is held; switch to beta which resolves first.
+  await type('beta');
+  await waitFor(async () => {
+    const options = await findAllSelectOptions();
+    expect(options).toHaveLength(1);
+    expect(options[0]).toHaveTextContent('Match-beta');
+  });
+
+  // Release the stale alpha response. It must be dropped — its key must not
+  // be cached, or returning to "alpha" later would short-circuit the fetch.
+  resolveAlpha!({ data: alphaData, totalCount: 1 });
+  await waitFor(async () => {
+    // Beta is still showing because alpha's response was dropped.
+    const options = await findAllSelectOptions();
+    expect(options[0]).toHaveTextContent('Match-beta');
+  });
+
+  // Returning to "alpha" must re-trigger the fetch (cache wasn't poisoned).
+  const callsBeforeAlphaReturn = loadOptions.mock.calls.filter(
+    args => args[0] === 'alpha',
+  ).length;
+  await type('alpha');
+  await waitFor(() => {
+    const callsAfter = loadOptions.mock.calls.filter(
+      args => args[0] === 'alpha',
+    ).length;
+    expect(callsAfter).toBeGreaterThan(callsBeforeAlphaReturn);
+  });
+  await waitFor(async () => {
+    const options = await findAllSelectOptions();
+    expect(options[0]).toHaveTextContent('Match-alpha');
+  });
+});
+
+test('keeps loading indicator while a newer request is in flight after a stale response is dropped', async () => {
+  // Regression for the P2 race: the `.finally` block that clears isLoading
+  // must not fire when a stale (dropped) response resolves while a newer
+  // request is still in flight. Otherwise the spinner disappears mid-search
+  // and the undebounced scroll-pagination handler can fire against stale
+  // totalCount before page 0 of the active search lands.
+  type OptionRow = { label: string; value: string | number };
+  type PageResponse = { data: OptionRow[]; totalCount: number };
+  // Initialized to no-op so the finally block can always call them, even if
+  // an assertion in the try throws before the corresponding mock ran.
+  let resolveAlpha: (value: PageResponse) => void = () => {};
+  let resolveBeta: (value: PageResponse) => void = () => {};
+  const page0Data: OptionRow[] = Array.from({ length: 10 }, (_, i) => ({
+    label: `Option ${i}`,
+    value: i,
+  }));
+  const alphaData: OptionRow[] = [{ label: 'Match-alpha', value: 'va' }];
+  const betaData: OptionRow[] = [{ label: 'Match-beta', value: 'vb' }];
+
+  const loadOptions = jest.fn((search: string) => {
+    if (search === '') {
+      return Promise.resolve<PageResponse>({
+        data: page0Data,
+        totalCount: 100,
+      });
+    }
+    if (search === 'alpha') {
+      return new Promise<PageResponse>(resolve => {
+        resolveAlpha = resolve;
+      });
+    }
+    return new Promise<PageResponse>(resolve => {
+      resolveBeta = resolve;
+    });
+  });
+
+  const isSpinnerVisible = (): boolean =>
+    Boolean(document.querySelector('.ant-select-arrow .ant-spin'));
+
+  try {
+    render(<AsyncSelect {...defaultProps} options={loadOptions} />);
+    await open();
+    await waitFor(() => expect(loadOptions).toHaveBeenCalledWith('', 0, 10));
+
+    // Type 'alpha' — alpha fetch is held, loading should be true.
+    await type('alpha');
+    await waitFor(() =>
+      expect(loadOptions).toHaveBeenCalledWith('alpha', 0, 10),
+    );
+    await waitFor(() => expect(isSpinnerVisible()).toBe(true));
+
+    // Type 'beta' — beta fetch is also held; both are in flight.
+    await type('beta');
+    await waitFor(() =>
+      expect(loadOptions).toHaveBeenCalledWith('beta', 0, 10),
+    );
+    expect(isSpinnerVisible()).toBe(true);
+
+    // Release the stale alpha response. It is dropped at the early-return
+    // (search !== inputValueRef.current), but the in-flight counter is still
+    // non-zero because beta is pending — spinner must stay visible.
+    resolveAlpha({ data: alphaData, totalCount: 1 });
+    // Yield a microtask so alpha's .then/.finally runs, then re-assert.
+    await Promise.resolve();
+    expect(isSpinnerVisible()).toBe(true);
+
+    // Release beta. Now the in-flight counter drops to 0 and the spinner
+    // clears.
+    resolveBeta({ data: betaData, totalCount: 1 });
+    await waitFor(() => expect(isSpinnerVisible()).toBe(false));
+    const options = await findAllSelectOptions();
+    expect(options).toHaveLength(1);
+    expect(options[0]).toHaveTextContent('Match-beta');
+  } finally {
+    // Defensive: never leave a held promise that could hang a parallel worker
+    // if an assertion above threw. Promise resolve is idempotent.
+    resolveAlpha({ data: alphaData, totalCount: 1 });
+    resolveBeta({ data: betaData, totalCount: 1 });
+  }
+});
+
+test('re-shows search results when the same search term is repeated after a clear', async () => {
+  // Regression: a prior fix cached search responses' totalCount in
+  // fetchedQueries. After restore-on-clear had replaced selectOptions with
+  // the base list, re-typing a previously-resolved term would hit the cache
+  // short-circuit and leave selectOptions stale (empty / base-only).
+  const page0Data = Array.from({ length: 10 }, (_, i) => ({
+    label: `Option ${i}`,
+    value: i,
+  }));
+  const alphaData = [{ label: 'Match-alpha', value: 'va' }];
+  const loadOptions = jest.fn(async (search: string) => {
+    if (search === '') {
+      // totalCount > data.length so allValuesLoaded stays false and the
+      // search path is not bypassed by the "all loaded" short-circuit.
+      return { data: page0Data, totalCount: 100 };
+    }
+    return { data: alphaData, totalCount: 1 };
+  });
+
+  render(<AsyncSelect {...defaultProps} options={loadOptions} />);
+  await open();
+  await waitFor(() => expect(loadOptions).toHaveBeenCalledWith('', 0, 10));
+
+  await type('alpha');
+  await waitFor(async () => {
+    const options = await findAllSelectOptions();
+    expect(options).toHaveLength(1);
+    expect(options[0]).toHaveTextContent('Match-alpha');
+  });
+
+  await type('');
+  await waitFor(() =>
+    expect(screen.queryByText('Match-alpha')).not.toBeInTheDocument(),
+  );
+
+  const callsBefore = loadOptions.mock.calls.filter(
+    args => args[0] === 'alpha',
+  ).length;
+  await type('alpha');
+  await waitFor(() => {
+    const callsAfter = loadOptions.mock.calls.filter(
+      args => args[0] === 'alpha',
+    ).length;
+    expect(callsAfter).toBeGreaterThan(callsBefore);
+  });
+  await waitFor(async () => {
+    const options = await findAllSelectOptions();
+    expect(options).toHaveLength(1);
+    expect(options[0]).toHaveTextContent('Match-alpha');
+  });
+});
+
+test('appends page>1 results during an active search and discards them when search changes', async () => {
+  // Covers the production branch `else { mergeData(data) }` in fetchPage that
+  // fires when search is non-empty AND page > 0 — i.e. user scrolled within
+  // a multi-page search result. Switching to a new search must replace, not
+  // retain, the prior search's accumulated pages.
+  type OptionRow = { label: string; value: string | number };
+  const pageSize = 5;
+  const aliceData: OptionRow[] = Array.from({ length: 5 }, (_, i) => ({
+    label: `Alice-${i}`,
+    value: `a${i}`,
+  }));
+  const alicePage1: OptionRow[] = Array.from({ length: 3 }, (_, i) => ({
+    label: `Alice-${i + 5}`,
+    value: `a${i + 5}`,
+  }));
+  const bobData: OptionRow[] = [{ label: 'Bob-0', value: 'b0' }];
+
+  const loadOptions = jest.fn(
+    async (
+      search: string,
+      page: number,
+    ): Promise<{
+      data: OptionRow[];
+      totalCount: number;
+    }> => {
+      if (search === '') {
+        return { data: [], totalCount: 100 };
+      }
+      if (search === 'alice') {
+        if (page === 0) return { data: aliceData, totalCount: 8 };
+        return { data: alicePage1, totalCount: 8 };
+      }
+      return { data: bobData, totalCount: 1 };
+    },
+  );
+
+  render(
+    <AsyncSelect {...defaultProps} pageSize={pageSize} options={loadOptions} />,
+  );
+  await open();
+
+  await type('alice');
+  await waitFor(() =>
+    expect(loadOptions).toHaveBeenCalledWith('alice', 0, pageSize),
+  );
+  await waitFor(async () => {
+    const options = await findAllSelectOptions();
+    expect(options).toHaveLength(5);
+  });
+  // Wait for loading to finish so handlePagination's `!isLoading` gate is
+  // open before we fire scroll.
+  await waitFor(() =>
+    expect(document.querySelector('.ant-select-arrow .ant-spin')).toBeNull(),
+  );
+
+  // Trigger pagination by dispatching a scroll event on the virtual-list
+  // scroll container. jsdom returns 0 for layout properties by default, so
+  // override the relevant ones before firing scroll. rc-virtual-list reads
+  // scrollTop via e.currentTarget in its onFallbackScroll handler, which
+  // then forwards to onPopupScroll (handlePagination here).
+  const holder = document.querySelector(
+    '.rc-virtual-list-holder',
+  ) as HTMLElement | null;
+  if (!holder) throw new Error('virtual-list holder not rendered');
+  Object.defineProperty(holder, 'scrollHeight', {
+    configurable: true,
+    get: () => 1000,
+  });
+  Object.defineProperty(holder, 'offsetHeight', {
+    configurable: true,
+    get: () => 200,
+  });
+  Object.defineProperty(holder, 'clientHeight', {
+    configurable: true,
+    get: () => 200,
+  });
+  Object.defineProperty(holder, 'scrollTop', {
+    configurable: true,
+    get: () => 900,
+    set: () => {},
+  });
+  fireEvent.scroll(holder);
+
+  await waitFor(() =>
+    expect(loadOptions).toHaveBeenCalledWith('alice', 1, pageSize),
+  );
+  await waitFor(async () => {
+    const options = await findAllSelectOptions();
+    // Page 0 (5) + page 1 (3) merged
+    expect(options).toHaveLength(8);
+  });
+
+  // Switching to a new search must replace the accumulated pages, not retain
+  // them.
+  await type('bob');
+  await waitFor(() =>
+    expect(loadOptions).toHaveBeenCalledWith('bob', 0, pageSize),
+  );
+  await waitFor(async () => {
+    const options = await findAllSelectOptions();
+    expect(options).toHaveLength(1);
+    expect(options[0]).toHaveTextContent('Bob-0');
+  });
+  expect(screen.queryByText('Alice-0')).not.toBeInTheDocument();
+  expect(screen.queryByText('Alice-7')).not.toBeInTheDocument();
+});
+
 test('does not duplicate options when using numeric values', async () => {
   render(
     <AsyncSelect

superset-frontend/packages/superset-ui-core/src/components/Select/AsyncSelect.tsx

@@ -160,6 +160,13 @@ const AsyncSelect = forwardRef(
     const [allValuesLoaded, setAllValuesLoaded] = useState(false);
     const selectValueRef = useRef(selectValue);
     const fetchedQueries = useRef(new Map<string, number>());
+    const initialOptionsRef = useRef<SelectOptionsType>(EMPTY_OPTIONS);
+    const inputValueRef = useRef('');
+    // Counts fetches whose `.finally` has not yet run. Loading is cleared only
+    // when this drops to 0, so a stale response (which returns early without
+    // updating selectOptions) cannot flip the spinner off while a newer
+    // request is still pending.
+    const inFlightFetchesRef = useRef(0);
     const mappedMode = isSingleMode ? undefined : 'multiple';
     const allowFetch = !fetchOnlyOnSearch || inputValue;
     const [maxTagCount, setMaxTagCount] = useState(
@@ -183,6 +190,10 @@ const AsyncSelect = forwardRef(
       selectValueRef.current = selectValue;
     }, [selectValue]);
 
+    useEffect(() => {
+      inputValueRef.current = inputValue;
+    }, [inputValue]);
+
     const sortSelectedFirst = useCallback(
       (a: AntdLabeledValue, b: AntdLabeledValue) =>
         sortSelectedFirstHelper(a, b, selectValueRef.current),
@@ -333,22 +344,78 @@ const AsyncSelect = forwardRef(
         setIsLoading(true);
 
         const fetchOptions = options as SelectOptionsPagePromise;
+        inFlightFetchesRef.current += 1;
         fetchOptions(search, page, pageSize)
           .then(({ data, totalCount }: SelectOptionsTypePage) => {
-            const mergedData = mergeData(data);
-            fetchedQueries.current.set(key, totalCount);
-            setTotalCount(totalCount);
-            if (
-              !fetchOnlyOnSearch &&
-              search === '' &&
-              mergedData.length >= totalCount
-            ) {
-              setAllValuesLoaded(true);
+            // Drop responses whose search arg no longer matches the user's
+            // current input — otherwise a slow base fetch can land after a
+            // search fetch (or a stale debounced search after a clear) and
+            // re-pollute the dropdown via mergeData / search-replace. Search
+            // responses are never cached in fetchedQueries: the cache stores
+            // only totalCount, so a cache hit would short-circuit the fetch
+            // and leave selectOptions stale (e.g. after restore-on-clear).
+            // Re-issuing the search is cheap and correct.
+            const matchesCurrentSearch = inputValueRef.current === search;
+            if (search && !matchesCurrentSearch) {
+              return;
+            }
+            if (!search) {
+              // Accumulate base pages in a ref independent of selectOptions
+              // (during an active search, selectOptions holds search results
+              // and is not a safe accumulator). The accumulator is kept up
+              // to date even when this response landed during a search, so
+              // restore-on-clear has a complete snapshot. We don't sort here
+              // — restore-on-clear sorts a copy at consumption time, and the
+              // live selectOptions path below goes through mergeData which
+              // sorts there. Sorting here too would double the per-page sort
+              // cost on large cached option sets.
+              const dataValues = new Set(data.map(opt => opt.value));
+              const accumulated = initialOptionsRef.current
+                .filter(opt => !dataValues.has(opt.value))
+                .concat(data);
+              initialOptionsRef.current = accumulated;
+              if (!fetchOnlyOnSearch && accumulated.length >= totalCount) {
+                setAllValuesLoaded(true);
+              }
+              fetchedQueries.current.set(key, totalCount);
+              if (matchesCurrentSearch) {
+                // No active search — push to live selectOptions and update
+                // totalCount. When matchesCurrentSearch is false, the user
+                // is mid-search; leave the search's totalCount in place so
+                // pagination math stays correct.
+                mergeData(data);
+                setTotalCount(totalCount);
+              }
+            } else if (page === 0) {
+              // Replace cached options with server results; preserve
+              // optimistic isNewOption entries inserted by handleOnSearch
+              // so allowNewOptions users can still click the value they
+              // typed when the server returns no match.
+              setSelectOptions(prevOptions => {
+                const dataValues = new Set(data.map(opt => opt.value));
+                const preservedNew = prevOptions.filter(
+                  opt => opt.isNewOption && !dataValues.has(opt.value),
+                );
+                return preservedNew
+                  .concat(data)
+                  .sort(sortComparatorForNoSearch);
+              });
+              setTotalCount(totalCount);
+            } else {
+              // page > 0 during an active search — append normally.
+              mergeData(data);
+              setTotalCount(totalCount);
             }
           })
           .catch(internalOnError)
           .finally(() => {
-            setIsLoading(false);
+            inFlightFetchesRef.current = Math.max(
+              0,
+              inFlightFetchesRef.current - 1,
+            );
+            if (inFlightFetchesRef.current === 0) {
+              setIsLoading(false);
+            }
           });
       },
       [
@@ -358,6 +425,7 @@ const AsyncSelect = forwardRef(
         internalOnError,
         options,
         pageSize,
+        sortComparatorForNoSearch,
       ],
     );
 
@@ -500,6 +568,7 @@ const AsyncSelect = forwardRef(
       fetchedQueries.current.clear();
       setAllValuesLoaded(false);
       setSelectOptions(EMPTY_OPTIONS);
+      initialOptionsRef.current = EMPTY_OPTIONS;
     }, [options]);
 
     useEffect(() => {
@@ -514,16 +583,36 @@ const AsyncSelect = forwardRef(
       [debouncedFetchPage],
     );
 
+    const previousInputValue = usePrevious(inputValue, '');
     useEffect(() => {
       if (loadingEnabled && allowFetch) {
         // trigger fetch every time inputValue changes
         if (inputValue) {
           debouncedFetchPage(inputValue, 0);
         } else {
+          // Cancel any pending debounced search fetch so it can't fire after
+          // we've already restored the base list.
+          debouncedFetchPage.cancel();
+          // On returning to empty input after a search, restore the cached
+          // base options so the dropdown shows the original page-0 list
+          // instead of the stale search results.
+          if (previousInputValue && initialOptionsRef.current.length > 0) {
+            setSelectOptions(
+              [...initialOptionsRef.current].sort(sortComparatorForNoSearch),
+            );
+          }
           fetchPage('', 0);
         }
       }
-    }, [loadingEnabled, fetchPage, allowFetch, inputValue, debouncedFetchPage]);
+    }, [
+      loadingEnabled,
+      fetchPage,
+      allowFetch,
+      inputValue,
+      previousInputValue,
+      debouncedFetchPage,
+      sortComparatorForNoSearch,
+    ]);
 
     useEffect(() => {
       if (loading !== undefined && loading !== isLoading) {
@@ -531,7 +620,11 @@ const AsyncSelect = forwardRef(
       }
     }, [isLoading, loading]);
 
-    const clearCache = () => fetchedQueries.current.clear();
+    const clearCache = () => {
+      fetchedQueries.current.clear();
+      initialOptionsRef.current = EMPTY_OPTIONS;
+      setAllValuesLoaded(false);
+    };
 
     useImperativeHandle(
       ref,

superset-frontend/packages/superset-ui-core/src/components/Select/utils.tsx

@@ -211,6 +211,10 @@ export const handleFilterOptionHelper = (
     return filterOption(search, option);
   }
 
+  if (filterOption === false) {
+    return true;
+  }
+
   if (filterOption) {
     const searchValue = search.trim().toLowerCase();
     if (optionFilterProps?.length) {

superset-frontend/packages/superset-ui-core/src/components/TableView/TableView.test.tsx

@@ -371,3 +371,37 @@ test('should handle large datasets with pagination', () => {
   expect(screen.getByRole('list')).toBeInTheDocument();
   expect(screen.getByText('1-10 of 100')).toBeInTheDocument();
 });
+
+test('should reset to first page when data reduces below current page', async () => {
+  // Start with 30 items, 10 per page = 3 pages
+  const initialData = Array.from({ length: 30 }, (_, i) => ({
+    id: i,
+    age: 20 + i,
+    name: `Person ${i}`,
+  }));
+
+  const props = {
+    ...mockedProps,
+    data: initialData,
+    pageSize: 10,
+  };
+
+  const { rerender } = render(<TableView {...props} />);
+
+  // Navigate to page 3 (last page)
+  const page3 = screen.getByRole('listitem', { name: '3' });
+  await userEvent.click(page3);
+
+  await waitFor(() => {
+    expect(screen.getByText('21-30 of 30')).toBeInTheDocument();
+  });
+
+  // Reduce data to only 5 items (fewer than current page would show)
+  const reducedData = initialData.slice(0, 5);
+  rerender(<TableView {...props} data={reducedData} />);
+
+  // Should reset to page 1 since page 3 no longer exists
+  await waitFor(() => {
+    expect(screen.getByText('1-5 of 5')).toBeInTheDocument();
+  });
+});

superset-frontend/packages/superset-ui-core/src/components/TableView/TableView.tsx

@@ -246,6 +246,21 @@ const RawTableView = ({
     }
   }, [initialSortBy, onServerPagination, serverPagination, sortBy]);
 
+  // Reset to first page when current page exceeds available pages
+  // (e.g., when filtering reduces the data below the current page)
+  const pageCount = Math.ceil(data.length / effectivePageSize);
+  useEffect(() => {
+    if (
+      withPagination &&
+      !serverPagination &&
+      !loading &&
+      pageIndex > pageCount - 1 &&
+      pageCount > 0
+    ) {
+      setPageIndex(0);
+    }
+  }, [withPagination, serverPagination, loading, pageIndex, pageCount]);
+
   return (
     <TableViewStyles {...props} ref={tableRef}>
       <TableCollection

superset-frontend/packages/superset-ui-core/src/query/types/QueryResponse.ts

@@ -77,6 +77,7 @@ export interface ChartDataResponseResult {
   // TODO(hainenber): define proper type for below attributes
   rejected_filters?: any[];
   applied_filters?: any[];
+  warning?: string | null;
   /**
    * Detected ISO 4217 currency code when AUTO mode is used.
    * Returns the currency code if all filtered data contains a single currency,

superset-frontend/plugins/plugin-chart-echarts/src/Treemap/constants.ts

@@ -21,8 +21,8 @@ import { TreePathInfo } from '../types';
 
 export const COLOR_SATURATION = [0.7, 0.4];
 export const LABEL_FONTSIZE = 11;
-export const BORDER_WIDTH = 2;
-export const GAP_WIDTH = 2;
+export const BORDER_WIDTH = 0;
+export const GAP_WIDTH = 0;
 
 export const extractTreePathInfo = (
   treePathInfo: TreePathInfo[] | undefined,

superset-frontend/plugins/plugin-chart-echarts/src/Treemap/transformProps.ts

@@ -214,7 +214,8 @@ export default function transformProps(
               colorAlpha: OpacityEnum.SemiTransparent,
               color: theme.colorText,
               borderColor: theme.colorBgBase,
-              borderWidth: 2,
+              borderWidth: BORDER_WIDTH,
+              gapWidth: GAP_WIDTH,
             },
             label: {
               ...labelProps,

superset-frontend/plugins/plugin-chart-echarts/test/Treemap/transformProps.test.ts

@@ -18,6 +18,7 @@
  */
 import { ChartProps } from '@superset-ui/core';
 import { supersetTheme } from '@apache-superset/core/theme';
+import { OpacityEnum } from '../../src/constants';
 import { EchartsTreemapChartProps } from '../../src/Treemap/types';
 import transformProps from '../../src/Treemap/transformProps';
 
@@ -74,4 +75,44 @@ describe('Treemap transformProps', () => {
       }),
     );
   });
+
+  test('should not render gaps between treemap nodes when filtered', () => {
+    const filteredChartProps = new ChartProps({
+      ...chartProps,
+      filterState: { selectedValues: ['Sylvester,bar1'] },
+    });
+
+    expect(
+      transformProps(filteredChartProps as EchartsTreemapChartProps),
+    ).toEqual(
+      expect.objectContaining({
+        echartOptions: expect.objectContaining({
+          series: [
+            expect.objectContaining({
+              data: expect.arrayContaining([
+                expect.objectContaining({
+                  children: expect.arrayContaining([
+                    expect.objectContaining({
+                      name: 'Arnold',
+                      children: expect.arrayContaining([
+                        expect.objectContaining({
+                          name: 'bar2',
+                          itemStyle: expect.objectContaining({
+                            borderWidth: 0,
+                            gapWidth: 0,
+                            colorAlpha: OpacityEnum.SemiTransparent,
+                          }),
+                          label: expect.objectContaining({}),
+                        }),
+                      ]),
+                    }),
+                  ]),
+                }),
+              ]),
+            }),
+          ],
+        }),
+      }),
+    );
+  });
 });

superset-frontend/plugins/plugin-chart-point-cluster-map/package.json

@@ -29,7 +29,7 @@
     "@math.gl/web-mercator": "^4.1.0",
     "mapbox-gl": "^3.24.0",
     "maplibre-gl": "^5.24.0",
-    "react-map-gl": "^8.1.1",
+    "react-map-gl": "^8.1.0",
     "supercluster": "^8.0.1"
   },
   "peerDependencies": {

superset-frontend/plugins/preset-chart-deckgl/src/layers/Path/Path.test.tsx

@@ -27,7 +27,7 @@ jest.mock('../../DeckGLContainer', () => ({
 }));
 
 jest.mock('../../factory', () => ({
-  createDeckGLComponent: jest.fn(() => () => null),
+  createCategoricalDeckGLComponent: jest.fn(() => () => null),
   GetLayerType: {},
 }));
 
@@ -53,6 +53,14 @@ const mockPayload = {
   },
 };
 
+const mockLayerParams = {
+  onContextMenu: jest.fn(),
+  filterState: undefined,
+  setDataMask: jest.fn(),
+  setTooltip: jest.fn(),
+  emitCrossFilters: false,
+};
+
 test('getLayer uses line_width_unit from formData', () => {
   const layer = getLayer({
     formData: mockFormData,
@@ -117,3 +125,518 @@ test('getPoints extracts points from path data', () => {
   expect(points[0]).toEqual([0, 0]);
   expect(points[2]).toEqual([2, 2]);
 });
+
+test('Fixed width mode returns constant width for all paths', () => {
+  const payload = {
+    data: {
+      features: [
+        {
+          path: [
+            [0, 0],
+            [1, 1],
+          ],
+          width: 5,
+        },
+        {
+          path: [
+            [2, 2],
+            [3, 3],
+          ],
+          width: 5,
+        },
+        {
+          path: [
+            [4, 4],
+            [5, 5],
+          ],
+          width: 5,
+        },
+      ],
+    },
+  };
+
+  const layer = getLayer({
+    formData: {
+      ...mockFormData,
+      min_width: 1,
+      max_width: 20,
+      line_width_multiplier: 1,
+    },
+    payload,
+    ...mockLayerParams,
+  });
+
+  const data = layer.props.data as any[];
+  const widths = data.map(d => d.width);
+
+  widths.forEach(width => {
+    expect(width).toBe(widths[0]);
+  });
+});
+
+test('Fixed width mode applies multiplier correctly', () => {
+  const payload = {
+    data: {
+      features: [
+        {
+          path: [
+            [0, 0],
+            [1, 1],
+          ],
+          width: 5,
+        },
+      ],
+    },
+  };
+
+  const layer = getLayer({
+    formData: {
+      ...mockFormData,
+      line_width_multiplier: 3,
+      min_width: 1,
+      max_width: 100,
+    },
+    payload,
+    ...mockLayerParams,
+  });
+
+  const data = layer.props.data as any[];
+  expect(data[0].width).toBe(15);
+});
+
+test('Fixed width mode enforces minimum width bound', () => {
+  const payload = {
+    data: {
+      features: [
+        {
+          path: [
+            [0, 0],
+            [1, 1],
+          ],
+          width: 0.1,
+        },
+      ],
+    },
+  };
+
+  const layer = getLayer({
+    formData: {
+      ...mockFormData,
+      min_width: 2,
+      max_width: 20,
+      line_width_multiplier: 1,
+    },
+    payload,
+    ...mockLayerParams,
+  });
+
+  const data = layer.props.data as any[];
+  expect(data[0].width).toBeGreaterThanOrEqual(2);
+});
+
+test('Fixed width mode enforces maximum width bound', () => {
+  const payload = {
+    data: {
+      features: [
+        {
+          path: [
+            [0, 0],
+            [1, 1],
+          ],
+          width: 100,
+        },
+      ],
+    },
+  };
+
+  const layer = getLayer({
+    formData: {
+      ...mockFormData,
+      min_width: 1,
+      max_width: 20,
+      line_width_multiplier: 1,
+    },
+    payload,
+    ...mockLayerParams,
+  });
+
+  const data = layer.props.data as any[];
+  expect(data[0].width).toBeLessThanOrEqual(20);
+});
+
+test('Fixed width mode defaults width to 1 when no width is provided', () => {
+  const payload = {
+    data: {
+      features: [
+        {
+          path: [
+            [0, 0],
+            [1, 1],
+          ],
+        },
+      ],
+    },
+  };
+
+  const layer = getLayer({
+    formData: {
+      ...mockFormData,
+      line_width: undefined,
+      min_width: 1,
+      max_width: 20,
+      line_width_multiplier: 1,
+    },
+    payload,
+    ...mockLayerParams,
+  });
+
+  const data = layer.props.data as any[];
+  expect(data[0].width).toBe(1);
+});
+
+test('Metric mode normalizes widths proportionally between min and max bounds', () => {
+  const payload = {
+    data: {
+      features: [
+        {
+          path: [
+            [0, 0],
+            [1, 1],
+          ],
+          width: 100,
+        },
+        {
+          path: [
+            [2, 2],
+            [3, 3],
+          ],
+          width: 200,
+        },
+        {
+          path: [
+            [4, 4],
+            [5, 5],
+          ],
+          width: 300,
+        },
+      ],
+    },
+  };
+
+  const layer = getLayer({
+    formData: {
+      ...mockFormData,
+      line_width: { type: 'metric', value: 'some_metric' },
+      min_width: 1,
+      max_width: 20,
+      line_width_multiplier: 1,
+    },
+    payload,
+    ...mockLayerParams,
+  });
+
+  const data = layer.props.data as any[];
+  const widths = data.map((d: any) => d.width);
+
+  expect(widths[0]).toBeCloseTo(1);
+  expect(widths[1]).toBeCloseTo(10.5);
+  expect(widths[2]).toBeCloseTo(20);
+});
+
+test('Metric mode applies multiplier after normalization', () => {
+  const payload = {
+    data: {
+      features: [
+        {
+          path: [
+            [0, 0],
+            [1, 1],
+          ],
+          width: 100,
+        },
+        {
+          path: [
+            [2, 2],
+            [3, 3],
+          ],
+          width: 200,
+        },
+      ],
+    },
+  };
+
+  const layer = getLayer({
+    formData: {
+      ...mockFormData,
+      line_width: { type: 'metric', value: 'some_metric' },
+      min_width: 1,
+      max_width: 20,
+      line_width_multiplier: 2,
+    },
+    payload,
+    ...mockLayerParams,
+  });
+
+  const data = layer.props.data as any[];
+
+  expect(data[0].width).toBeCloseTo(2);
+  expect(data[1].width).toBe(20);
+});
+
+test('Metric mode enforces bounds after multiplier', () => {
+  const payload = {
+    data: {
+      features: [
+        {
+          path: [
+            [0, 0],
+            [1, 1],
+          ],
+          width: 100,
+        },
+        {
+          path: [
+            [2, 2],
+            [3, 3],
+          ],
+          width: 500,
+        },
+      ],
+    },
+  };
+
+  const layer = getLayer({
+    formData: {
+      ...mockFormData,
+      min_width: 5,
+      max_width: 15,
+      line_width_multiplier: 10,
+    },
+    payload,
+    ...mockLayerParams,
+  });
+
+  const data = layer.props.data as any[];
+
+  data.forEach((d: any) => {
+    expect(d.width).toBeGreaterThanOrEqual(5);
+    expect(d.width).toBeLessThanOrEqual(15);
+  });
+});
+
+test('Metric mode handles equal width values.', () => {
+  const payload = {
+    data: {
+      features: [
+        {
+          path: [
+            [0, 0],
+            [1, 1],
+          ],
+          width: 100,
+        },
+        {
+          path: [
+            [2, 2],
+            [3, 3],
+          ],
+          width: 100,
+        },
+      ],
+    },
+  };
+
+  const layer = getLayer({
+    formData: {
+      ...mockFormData,
+      min_width: 1,
+      max_width: 20,
+      line_width_multiplier: 1,
+    },
+    payload,
+    ...mockLayerParams,
+  });
+
+  const data = layer.props.data as any[];
+
+  expect(data[0].width).toBe(data[1].width);
+});
+
+test('Metric mode handles null width values', () => {
+  const payload = {
+    data: {
+      features: [
+        {
+          path: [
+            [0, 0],
+            [1, 1],
+          ],
+          width: 100,
+        },
+        {
+          path: [
+            [2, 2],
+            [3, 3],
+          ],
+          width: null,
+        },
+        {
+          path: [
+            [4, 4],
+            [5, 5],
+          ],
+          width: 300,
+        },
+      ],
+    },
+  };
+
+  const layer = getLayer({
+    formData: {
+      ...mockFormData,
+      line_width: { type: 'metric', value: 'some_metric' },
+      min_width: 1,
+      max_width: 20,
+      line_width_multiplier: 1,
+    },
+    payload,
+    ...mockLayerParams,
+  });
+
+  const data = layer.props.data as any[];
+
+  expect(data[1].width).toBe(1);
+  expect(data[0].width).toBeCloseTo(1);
+  expect(data[2].width).toBeCloseTo(20);
+});
+
+test('Fixed color mode returns same color for all paths', () => {
+  const payload = {
+    data: {
+      features: [
+        {
+          path: [
+            [0, 0],
+            [1, 1],
+          ],
+        },
+        {
+          path: [
+            [2, 2],
+            [3, 3],
+          ],
+        },
+        {
+          path: [
+            [4, 4],
+            [5, 5],
+          ],
+        },
+      ],
+    },
+  };
+
+  const layer = getLayer({
+    formData: {
+      ...mockFormData,
+      color_picker: { r: 255, g: 100, b: 50, a: 1 },
+    },
+    payload,
+    ...mockLayerParams,
+  });
+
+  const data = layer.props.data as any[];
+  const expectedColor = [255, 100, 50, 255];
+
+  data.forEach((d: any) => {
+    expect(d.color).toEqual(expectedColor);
+  });
+});
+
+test('Categorical mode preserves distinct colors for selected categories', () => {
+  const payload = {
+    data: {
+      features: [
+        {
+          path: [
+            [0, 0],
+            [1, 1],
+          ],
+          color: [255, 0, 0, 255],
+          cat_color: 'A',
+        },
+        {
+          path: [
+            [2, 2],
+            [3, 3],
+          ],
+          color: [0, 0, 255, 255],
+          cat_color: 'B',
+        },
+        {
+          path: [
+            [4, 4],
+            [5, 5],
+          ],
+          color: [255, 0, 0, 255],
+          cat_color: 'A',
+        },
+      ],
+    },
+  };
+
+  const layer = getLayer({
+    formData: mockFormData,
+    payload,
+    ...mockLayerParams,
+  });
+
+  const data = layer.props.data as any[];
+
+  expect(data[0].color).toEqual(data[2].color);
+  expect(data[0].color).not.toEqual(data[1].color);
+});
+
+test('Breakpoint mode preserves colors assigned by addColor based on metric ranges', () => {
+  const payload = {
+    data: {
+      features: [
+        {
+          path: [
+            [0, 0],
+            [1, 1],
+          ],
+          color: [255, 0, 0, 255],
+          metric: 50,
+        },
+        {
+          path: [
+            [2, 2],
+            [3, 3],
+          ],
+          color: [0, 0, 255, 255],
+          metric: 200,
+        },
+        {
+          path: [
+            [4, 4],
+            [5, 5],
+          ],
+          color: [255, 0, 0, 255],
+          metric: 75,
+        },
+      ],
+    },
+  };
+
+  const layer = getLayer({
+    formData: mockFormData,
+    payload,
+    ...mockLayerParams,
+  });
+
+  const data = layer.props.data as any[];
+
+  expect(data[0].color).toEqual(data[2].color);
+  expect(data[0].color).not.toEqual(data[1].color);
+});

superset-frontend/plugins/preset-chart-deckgl/src/layers/Path/Path.tsx

@@ -21,13 +21,14 @@ import { PathLayer } from '@deck.gl/layers';
 import { JsonObject, QueryFormData } from '@superset-ui/core';
 import { commonLayerProps } from '../common';
 import sandboxedEval from '../../utils/sandbox';
-import { GetLayerType, createDeckGLComponent } from '../../factory';
+import { GetLayerType, createCategoricalDeckGLComponent } from '../../factory';
 import { Point } from '../../types';
 import {
   createTooltipContent,
   CommonTooltipRows,
 } from '../../utilities/tooltipUtils';
 import { HIGHLIGHT_COLOR_ARRAY } from '../../utils';
+import { isMetricValue } from '../utils/metricUtils';
 
 function setTooltipContent(formData: QueryFormData) {
   const defaultTooltipGenerator = (o: JsonObject) => (
@@ -50,14 +51,69 @@ export const getLayer: GetLayerType<PathLayer> = function ({
   emitCrossFilters,
 }) {
   const fd = formData;
-  const c = fd.color_picker;
-  const fixedColor = [c.r, c.g, c.b, 255 * c.a];
-  let data = payload.data.features.map((feature: JsonObject) => ({
-    ...feature,
-    path: feature.path,
-    width: fd.line_width,
-    color: fixedColor,
-  }));
+  let data = payload.data.features.map((feature: JsonObject) => {
+    if (feature.color) {
+      return { ...feature };
+    }
+
+    const c = fd.color_picker || { r: 0, g: 0, b: 0, a: 1 };
+    const color = [c.r, c.g, c.b, 255 * c.a];
+
+    return {
+      ...feature,
+      path: feature.path,
+      color,
+    };
+  });
+
+  // Variables for width scaling and normalization
+  const minWidth = Number(fd.min_width) || 1; // defaulted to 1
+  const maxWidth = Number(fd.max_width) || 20; // defaulted to 20
+  const multiplier = Number(fd.line_width_multiplier) || 1; // defaulted to 1
+
+  const widths = data.map((d: JsonObject) => d.width).filter(Number.isFinite);
+
+  // Metric or fixed value
+  const isMetricWidth = isMetricValue(fd.line_width);
+
+  if (isMetricWidth) {
+    // Get minimum and maximum widths in data set
+    const minVal = widths.length > 0 ? Math.min(...widths) : minWidth;
+    const maxVal = widths.length > 0 ? Math.max(...widths) : maxWidth;
+
+    data = data.map((d: JsonObject) => {
+      if (d.width == null) return { ...d, width: minWidth };
+
+      const normalized =
+        maxVal === minVal ? 0.5 : (d.width - minVal) / (maxVal - minVal);
+
+      // Map within range of min + max
+      let width = minWidth + normalized * (maxWidth - minWidth);
+
+      // Apply scaling multiplier
+      width *= multiplier;
+
+      // Enforce minimum and maximum width bounds
+      width = Math.max(minWidth, Math.min(maxWidth, width));
+
+      return { ...d, width };
+    });
+  } else {
+    // Fixed width mode
+    // Allows for use with legacy charts
+    const fixedWidth =
+      typeof fd.line_width === 'number'
+        ? fd.line_width
+        : typeof fd.line_width === 'object' && fd.line_width?.type === 'fix'
+          ? Number(fd.line_width.value)
+          : undefined;
+
+    data = data.map((d: JsonObject) => {
+      let width = (d.width ?? fixedWidth ?? 1) * multiplier;
+      width = Math.max(minWidth, Math.min(maxWidth, width));
+      return { ...d, width };
+    });
+  }
 
   if (fd.js_data_mutator) {
     const jsFnMutator = sandboxedEval(fd.js_data_mutator);
@@ -66,13 +122,15 @@ export const getLayer: GetLayerType<PathLayer> = function ({
 
   return new PathLayer({
     id: `path-layer-${fd.slice_id}` as const,
-    getColor: (d: any) => d.color,
+    getColor: (d: any) => d.color || [0, 0, 0, 255],
     getPath: (d: any) => d.path,
     getWidth: (d: any) => d.width,
     data,
     rounded: true,
     widthScale: 1,
     widthUnits: fd.line_width_unit,
+    widthMinPixels: Number(fd.min_width) || undefined,
+    widthMaxPixels: Number(fd.max_width) || undefined,
     ...commonLayerProps({
       formData: fd,
       setTooltip,
@@ -101,13 +159,23 @@ export const getHighlightLayer: GetLayerType<PathLayer> = function ({
   filterState,
 }) {
   const fd = formData;
+  const minWidth = Number(fd.min_width) || 1;
+  const maxWidth = Number(fd.max_width) || 20;
+  const multiplier = Number(fd.line_width_multiplier) || 1;
   const fixedColor = HIGHLIGHT_COLOR_ARRAY;
-  let data = payload.data.features.map((feature: JsonObject) => ({
-    ...feature,
-    path: feature.path,
-    width: fd.line_width,
-    color: fixedColor,
-  }));
+  let data = payload.data.features.map((feature: JsonObject) => {
+    const baseWidth = Number.isFinite(feature.width) ? feature.width : 1;
+    let width = baseWidth * multiplier;
+
+    width = Math.max(minWidth, Math.min(maxWidth, width));
+
+    return {
+      ...feature,
+      path: feature.path,
+      width,
+      color: fixedColor,
+    };
+  });
 
   if (fd.js_data_mutator) {
     const jsFnMutator = sandboxedEval(fd.js_data_mutator);
@@ -128,7 +196,13 @@ export const getHighlightLayer: GetLayerType<PathLayer> = function ({
     rounded: true,
     widthScale: 1,
     widthUnits: fd.line_width_unit,
+    widthMinPixels: Number(fd.min_width) || undefined,
+    widthMaxPixels: Number(fd.max_width) || undefined,
   });
 };
 
-export default createDeckGLComponent(getLayer, getPoints, getHighlightLayer);
+export default createCategoricalDeckGLComponent(
+  getLayer,
+  getPoints,
+  getHighlightLayer,
+);

superset-frontend/plugins/preset-chart-deckgl/src/layers/Path/buildQuery.test.ts

@@ -0,0 +1,355 @@
+/**
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements.  See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership.  The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied.  See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ */
+import buildQuery, { DeckPathFormData } from './buildQuery';
+
+const baseFormData: DeckPathFormData = {
+  datasource: '1__table',
+  viz_type: 'deck_path',
+  line_column: 'path_json',
+  line_type: 'json',
+  row_limit: 100,
+};
+
+test('Path buildQuery should not include metric when line_width is fixed type', () => {
+  const formData: DeckPathFormData = {
+    ...baseFormData,
+    line_width: {
+      type: 'fix',
+      value: 5,
+    },
+  };
+
+  const queryContext = buildQuery(formData);
+  const [query] = queryContext.queries;
+
+  expect(query.metrics).toEqual([]);
+});
+
+test('Path buildQuery should handle numeric line_width value with fixed type', () => {
+  const formData: DeckPathFormData = {
+    ...baseFormData,
+    line_width: {
+      type: 'fix',
+      value: 5,
+    },
+  };
+
+  const queryContext = buildQuery(formData);
+  const [query] = queryContext.queries;
+
+  expect(query.metrics).toEqual([]);
+});
+
+test('Path buildQuery should handle missing line_width', () => {
+  const formData: DeckPathFormData = {
+    ...baseFormData,
+  };
+
+  const queryContext = buildQuery(formData);
+  const [query] = queryContext.queries;
+
+  expect(query.metrics).toEqual([]);
+});
+
+test('Path buildQuery should include metric when line_width is metric type', () => {
+  const formData: DeckPathFormData = {
+    ...baseFormData,
+    line_width: {
+      type: 'metric',
+      value: 'COUNT(*)',
+    },
+  };
+
+  const queryContext = buildQuery(formData);
+  const [query] = queryContext.queries;
+
+  expect(query.metrics).toContain('COUNT(*)');
+});
+
+test('Path buildQuery should add line_column to groupby when using width metric', () => {
+  const formData: DeckPathFormData = {
+    ...baseFormData,
+    line_width: {
+      type: 'metric',
+      value: 'SUM(distance)',
+    },
+  };
+
+  const queryContext = buildQuery(formData);
+  const [query] = queryContext.queries;
+
+  expect(query.groupby).toContain('path_json');
+});
+
+test('Path buildQuery should handle adhoc SQL metric for line_width', () => {
+  const adhocMetric = {
+    label: 'custom_width',
+    expressionType: 'SQL' as const,
+    sqlExpression: 'SUM(weight) / COUNT(*)',
+  };
+  const formData: DeckPathFormData = {
+    ...baseFormData,
+    line_width: {
+      type: 'metric',
+      value: adhocMetric,
+    },
+  };
+
+  const queryContext = buildQuery(formData);
+  const [query] = queryContext.queries;
+
+  expect(query.metrics).toContainEqual(adhocMetric);
+});
+
+test('Path buildQuery should handle adhoc SIMPLE metric for line_width', () => {
+  const adhocMetric = {
+    label: 'AVG(traffic)',
+    expressionType: 'SIMPLE' as const,
+    column: { column_name: 'traffic' },
+    aggregate: 'AVG' as const,
+  };
+  const formData: DeckPathFormData = {
+    ...baseFormData,
+    line_width: {
+      type: 'metric',
+      value: adhocMetric,
+    },
+  };
+
+  const queryContext = buildQuery(formData);
+  const [query] = queryContext.queries;
+
+  expect(query.metrics).toContainEqual(adhocMetric);
+});
+
+test('Path buildQuery should handle metric type with undefined value', () => {
+  const formData: DeckPathFormData = {
+    ...baseFormData,
+    line_width: {
+      type: 'metric',
+      value: undefined,
+    },
+  };
+
+  const queryContext = buildQuery(formData);
+  const [query] = queryContext.queries;
+
+  expect(query.metrics).toEqual([]);
+});
+
+test('Path buildQuery should not duplicate width metric if already in metrics', () => {
+  const formData: DeckPathFormData = {
+    ...baseFormData,
+    metrics: ['AVG(weight)'],
+    line_width: {
+      type: 'metric',
+      value: 'AVG(weight)',
+    },
+  };
+
+  const queryContext = buildQuery(formData);
+  const [query] = queryContext.queries;
+
+  expect(query.metrics).toHaveLength(1);
+});
+
+test('Path buildQuery should preserve existing metrics when adding width metric', () => {
+  const formData: DeckPathFormData = {
+    ...baseFormData,
+    metrics: ['COUNT(*)'],
+    line_width: {
+      type: 'metric',
+      value: 'AVG(weight)',
+    },
+  };
+
+  const queryContext = buildQuery(formData);
+  const [query] = queryContext.queries;
+
+  expect(query.metrics).toContain('COUNT(*)');
+  expect(query.metrics).toContain('AVG(weight)');
+  expect(query.metrics).toHaveLength(2);
+});
+
+test('Path buildQuery should not modify existing metrics for fixed width', () => {
+  const formData: DeckPathFormData = {
+    ...baseFormData,
+    metrics: ['COUNT(*)', 'SUM(value)'],
+    line_width: {
+      type: 'fix',
+      value: 5,
+    },
+  };
+
+  const queryContext = buildQuery(formData);
+  const [query] = queryContext.queries;
+
+  expect(query.metrics).toEqual(['COUNT(*)', 'SUM(value)']);
+});
+
+test('Path buildQuery should handle undefined value in metric type gracefully', () => {
+  const formData: DeckPathFormData = {
+    ...baseFormData,
+    line_width: {
+      type: 'metric',
+      value: undefined,
+    },
+  };
+
+  const queryContext = buildQuery(formData);
+  const [query] = queryContext.queries;
+
+  // Should not add anything when value is undefined
+  expect(query.metrics).toEqual([]);
+});
+
+test('Path buildQuery should handle line_width with undefined type', () => {
+  const formData: DeckPathFormData = {
+    ...baseFormData,
+    line_width: {
+      type: undefined,
+      value: 2,
+    },
+  };
+
+  const queryContext = buildQuery(formData);
+  const [query] = queryContext.queries;
+
+  expect(query.metrics).toEqual([]);
+});
+
+// ─── Dimension (categorical color) ───
+
+test('Path buildQuery should include dimension column when specified', () => {
+  const formData: DeckPathFormData = {
+    ...baseFormData,
+    dimension: 'route_type',
+  };
+
+  const queryContext = buildQuery(formData);
+  const [query] = queryContext.queries;
+
+  expect(query.columns).toContain('route_type');
+});
+
+test('Path buildQuery should include breakpoint_metric when specified', () => {
+  const formData: DeckPathFormData = {
+    ...baseFormData,
+    breakpoint_metric: 'AVG(speed)',
+  };
+
+  const queryContext = buildQuery(formData);
+  const [query] = queryContext.queries;
+
+  expect(query.metrics).toContain('AVG(speed)');
+});
+
+test('Path buildQuery should add line_column to groupby when using breakpoint metric', () => {
+  const formData: DeckPathFormData = {
+    ...baseFormData,
+    breakpoint_metric: 'AVG(speed)',
+  };
+
+  const queryContext = buildQuery(formData);
+  const [query] = queryContext.queries;
+
+  expect(query.groupby).toContain('path_json');
+});
+
+test('Path buildQuery should not duplicate breakpoint metric if already in metrics', () => {
+  const formData: DeckPathFormData = {
+    ...baseFormData,
+    metrics: ['AVG(speed)'],
+    breakpoint_metric: 'AVG(speed)',
+  };
+
+  const queryContext = buildQuery(formData);
+  const [query] = queryContext.queries;
+
+  expect(query.metrics).toHaveLength(1);
+  expect(query.metrics).toContain('AVG(speed)');
+});
+
+test('Path buildQuery should handle breakpoint_metric and line_width metric together', () => {
+  const formData: DeckPathFormData = {
+    ...baseFormData,
+    line_width: {
+      type: 'metric',
+      value: 'SUM(distance)',
+    },
+    breakpoint_metric: 'AVG(speed)',
+  };
+
+  const queryContext = buildQuery(formData);
+  const [query] = queryContext.queries;
+
+  expect(query.metrics).toContain('SUM(distance)');
+  expect(query.metrics).toContain('AVG(speed)');
+});
+
+test('Path buildQuery should handle adhoc breakpoint metric', () => {
+  const adhocMetric = {
+    label: 'avg_speed',
+    expressionType: 'SQL' as const,
+    sqlExpression: 'AVG(speed_mph)',
+  };
+  const formData: DeckPathFormData = {
+    ...baseFormData,
+    breakpoint_metric: adhocMetric,
+  };
+
+  const queryContext = buildQuery(formData);
+  const [query] = queryContext.queries;
+
+  expect(query.metrics).toContainEqual(adhocMetric);
+});
+
+test('Path buildQuery should handle missing breakpoint_metric', () => {
+  const formData: DeckPathFormData = {
+    ...baseFormData,
+  };
+
+  const queryContext = buildQuery(formData);
+  const [query] = queryContext.queries;
+
+  expect(query.metrics).toEqual([]);
+});
+
+test('Path buildQuery should handle line_width and breakpoint_metrics together together', () => {
+  const formData: DeckPathFormData = {
+    ...baseFormData,
+    line_width: {
+      type: 'metric',
+      value: 'SUM(distance)',
+    },
+    breakpoint_metric: 'AVG(speed)',
+    js_columns: ['color'],
+    tooltip_contents: ['name'],
+    row_limit: 500,
+  };
+
+  const queryContext = buildQuery(formData);
+  const [query] = queryContext.queries;
+
+  expect(query.metrics).toContain('SUM(distance)');
+  expect(query.metrics).toContain('AVG(speed)');
+  expect(query.columns).toContain('color');
+  expect(query.columns).toContain('name');
+  expect(query.row_limit).toBe(500);
+});

superset-frontend/plugins/preset-chart-deckgl/src/layers/Path/buildQuery.ts

@@ -19,10 +19,13 @@
 import {
   buildQueryContext,
   ensureIsArray,
+  getMetricLabel,
   SqlaFormData,
   QueryFormColumn,
+  QueryFormMetric,
 } from '@superset-ui/core';
 import { addNullFilters, addTooltipColumnsToQuery } from '../buildQueryUtils';
+import { isMetricValue } from '../utils/metricUtils';
 
 export interface DeckPathFormData extends SqlaFormData {
   line_column?: string;
@@ -32,10 +35,26 @@ export interface DeckPathFormData extends SqlaFormData {
   js_columns?: string[];
   tooltip_contents?: unknown[];
   tooltip_template?: string;
+  line_width?:
+    | string
+    | { type?: 'fix' | 'metric'; value?: QueryFormMetric | number };
+  line_width_multiplier?: number;
+  min_width?: number;
+  max_width?: number;
+  dimension?: string;
+  breakpoint_metric?: QueryFormMetric;
 }
 
 export default function buildQuery(formData: DeckPathFormData) {
-  const { line_column, metric, js_columns, tooltip_contents } = formData;
+  const {
+    line_column,
+    metric,
+    js_columns,
+    tooltip_contents,
+    line_width,
+    dimension,
+    breakpoint_metric,
+  } = formData;
 
   if (!line_column) {
     throw new Error('Line column is required for Path charts');
@@ -46,7 +65,7 @@ export default function buildQuery(formData: DeckPathFormData) {
       const columns = ensureIsArray(
         baseQueryObject.columns || [],
       ) as QueryFormColumn[];
-      const metrics = ensureIsArray(baseQueryObject.metrics || []);
+      let metrics = ensureIsArray(baseQueryObject.metrics || []);
       const groupby = ensureIsArray(
         baseQueryObject.groupby || [],
       ) as QueryFormColumn[];
@@ -63,6 +82,49 @@ export default function buildQuery(formData: DeckPathFormData) {
         columns.push(line_column);
       }
 
+      // Include dimension column for categorical color mode
+      if (dimension && !columns.includes(dimension)) {
+        columns.push(dimension);
+      }
+
+      // Add metric if line_width is a metric type
+      const isMetric = isMetricValue(line_width);
+      const rawWidthValue =
+        typeof line_width === 'string'
+          ? line_width
+          : typeof line_width === 'number'
+            ? undefined
+            : line_width?.value;
+      const widthMetric: QueryFormMetric | null =
+        isMetric &&
+        rawWidthValue !== undefined &&
+        typeof rawWidthValue !== 'number'
+          ? (rawWidthValue as QueryFormMetric)
+          : null;
+
+      // ensure metric is not added to metric array twice
+      const existingLabels = new Set(metrics.map(m => getMetricLabel(m)));
+      if (widthMetric && !existingLabels.has(getMetricLabel(widthMetric))) {
+        metrics = [...metrics, widthMetric];
+      }
+
+      // ensure line_column is in groupby when aggregating by width metric
+      if (widthMetric && !groupby.includes(line_column)) {
+        groupby.push(line_column);
+      }
+
+      if (breakpoint_metric) {
+        const breakpointLabel = getMetricLabel(breakpoint_metric);
+        const currentLabels = new Set(metrics.map(m => getMetricLabel(m)));
+        if (!currentLabels.has(breakpointLabel)) {
+          metrics = [...metrics, breakpoint_metric];
+        }
+        // ensure line_column is in groupby when aggregating
+        if (!groupby.includes(line_column)) {
+          groupby.push(line_column);
+        }
+      }
+
       jsColumns.forEach(col => {
         if (!columns.includes(col) && !groupby.includes(col)) {
           columns.push(col);

superset-frontend/plugins/preset-chart-deckgl/src/layers/Path/controlPanel.test.ts

@@ -0,0 +1,242 @@
+/**
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements.  See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership.  The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied.  See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ */
+import type {
+  ControlPanelSectionConfig,
+  ControlSetRow,
+  ControlSetItem,
+} from '@superset-ui/chart-controls';
+import controlPanel from './controlPanel';
+
+test('controlPanel should have Path Size section', () => {
+  const pathSizeSection = controlPanel.controlPanelSections.find(
+    (
+      section: ControlPanelSectionConfig | null,
+    ): section is ControlPanelSectionConfig =>
+      section != null && section.label === 'Path Size',
+  );
+
+  expect(pathSizeSection).toBeDefined();
+  expect(pathSizeSection?.expanded).toBe(true);
+});
+
+test('controlPanel should include pathLineWidthFixedOrMetric control', () => {
+  const pathSizeSection = controlPanel.controlPanelSections.find(
+    (
+      section: ControlPanelSectionConfig | null,
+    ): section is ControlPanelSectionConfig =>
+      section != null && section.label === 'Path Size',
+  );
+
+  const control = pathSizeSection?.controlSetRows
+    .flat()
+    .find(
+      (control: ControlSetItem) =>
+        control &&
+        typeof control === 'object' &&
+        'name' in control &&
+        control.name === 'line_width',
+    ) as any;
+
+  expect(control).toBeDefined();
+  expect(control.config.type).toBe('FixedOrMetricControl');
+  expect(control.config.default).toEqual({ type: 'fix', value: 1 });
+});
+
+test('controlPanel should include line_width_unit control with pixels as default', () => {
+  const pathSizeSection = controlPanel.controlPanelSections.find(
+    (
+      section: ControlPanelSectionConfig | null,
+    ): section is ControlPanelSectionConfig =>
+      section != null && section.label === 'Path Size',
+  );
+
+  const lineWidthRow = pathSizeSection?.controlSetRows.find(
+    (row: ControlSetRow) =>
+      row.some(
+        (control: ControlSetItem) =>
+          control &&
+          typeof control === 'object' &&
+          'name' in control &&
+          control.name === 'line_width_unit',
+      ),
+  );
+
+  const lineWidthControl = lineWidthRow?.find(
+    (control: ControlSetItem) =>
+      control &&
+      typeof control === 'object' &&
+      'name' in control &&
+      control.name === 'line_width_unit',
+  ) as any;
+
+  expect(lineWidthControl).toBeDefined();
+  expect(lineWidthControl?.config?.default).toBe('pixels');
+});
+
+test('controlPanel should include min_width control with default of 1', () => {
+  const minWidthSection = controlPanel.controlPanelSections.find(
+    (
+      section: ControlPanelSectionConfig | null,
+    ): section is ControlPanelSectionConfig =>
+      section != null && section.label === 'Path Size',
+  );
+
+  const minWidthRow = minWidthSection?.controlSetRows.find(
+    (row: ControlSetRow) =>
+      row.some(
+        (control: ControlSetItem) =>
+          control &&
+          typeof control === 'object' &&
+          'name' in control &&
+          control.name === 'min_width',
+      ),
+  );
+
+  const minWidthControl = minWidthRow?.find(
+    (control: ControlSetItem) =>
+      control &&
+      typeof control === 'object' &&
+      'name' in control &&
+      control.name === 'min_width',
+  ) as any;
+
+  expect(minWidthControl).toBeDefined();
+  expect(minWidthControl?.config?.default).toBe(1);
+});
+
+test('controlPanel should include max_width control with default of 20', () => {
+  const maxWidthSection = controlPanel.controlPanelSections.find(
+    (
+      section: ControlPanelSectionConfig | null,
+    ): section is ControlPanelSectionConfig =>
+      section != null && section.label === 'Path Size',
+  );
+
+  const maxWidthRow = maxWidthSection?.controlSetRows.find(
+    (row: ControlSetRow) =>
+      row.some(
+        (control: ControlSetItem) =>
+          control &&
+          typeof control === 'object' &&
+          'name' in control &&
+          control.name === 'max_width',
+      ),
+  );
+
+  const maxWidthControl = maxWidthRow?.find(
+    (control: ControlSetItem) =>
+      control &&
+      typeof control === 'object' &&
+      'name' in control &&
+      control.name === 'max_width',
+  ) as any;
+
+  expect(maxWidthControl).toBeDefined();
+  expect(maxWidthControl?.config?.default).toBe(20);
+});
+
+test('controlPanel should include line_width_multiplier control with default of 1', () => {
+  const lineWidthMultiplierSection = controlPanel.controlPanelSections.find(
+    (
+      section: ControlPanelSectionConfig | null,
+    ): section is ControlPanelSectionConfig =>
+      section != null && section.label === 'Path Size',
+  );
+
+  const lineWidthMultiplierRow =
+    lineWidthMultiplierSection?.controlSetRows.find((row: ControlSetRow) =>
+      row.some(
+        (control: ControlSetItem) =>
+          control &&
+          typeof control === 'object' &&
+          'name' in control &&
+          control.name === 'line_width_multiplier',
+      ),
+    );
+
+  const lineWidthMultiplierControl = lineWidthMultiplierRow?.find(
+    (control: ControlSetItem) =>
+      control &&
+      typeof control === 'object' &&
+      'name' in control &&
+      control.name === 'line_width_multiplier',
+  ) as any;
+
+  expect(lineWidthMultiplierControl).toBeDefined();
+  expect(lineWidthMultiplierControl?.config?.default).toBe(1);
+});
+
+test('controlPanel should have Path Color section', () => {
+  const pathColorSection = controlPanel.controlPanelSections.find(
+    (
+      section: ControlPanelSectionConfig | null,
+    ): section is ControlPanelSectionConfig =>
+      section != null && section.label === 'Path Color',
+  );
+
+  expect(pathColorSection).toBeDefined();
+  expect(pathColorSection?.expanded).toBe(true);
+});
+
+test('controlPanel should have Path Color section with color scheme controls', () => {
+  const pathColorSection = controlPanel.controlPanelSections.find(
+    (
+      section: ControlPanelSectionConfig | null,
+    ): section is ControlPanelSectionConfig =>
+      section != null && section.label === 'Path Color',
+  );
+
+  const controlNames = pathColorSection?.controlSetRows
+    .flat()
+    .filter(
+      (control: ControlSetItem) =>
+        control && typeof control === 'object' && 'name' in control,
+    )
+    .map((control: any) => control.name);
+
+  expect(controlNames).toContain('color_scheme_type');
+  expect(controlNames).toContain('color_picker');
+  expect(controlNames).toContain('dimension');
+  expect(controlNames).toContain('color_scheme');
+  expect(controlNames).toContain('breakpoint_metric');
+  expect(controlNames).toContain('default_breakpoint_color');
+  expect(controlNames).toContain('color_breakpoints');
+});
+
+test('color_scheme_type should default to fixed_color', () => {
+  const pathColorSection = controlPanel.controlPanelSections.find(
+    (
+      section: ControlPanelSectionConfig | null,
+    ): section is ControlPanelSectionConfig =>
+      section != null && section.label === 'Path Color',
+  );
+
+  const schemeTypeControl = pathColorSection?.controlSetRows
+    .flat()
+    .find(
+      (control: ControlSetItem) =>
+        control &&
+        typeof control === 'object' &&
+        'name' in control &&
+        control.name === 'color_scheme_type',
+    ) as any;
+
+  expect(schemeTypeControl).toBeDefined();
+  expect(schemeTypeControl?.config?.default).toBe('fixed_color');
+});

superset-frontend/plugins/preset-chart-deckgl/src/layers/Path/controlPanel.ts

@@ -26,7 +26,6 @@ import {
   jsTooltip,
   jsOnclickHref,
   viewport,
-  lineWidth,
   lineType,
   reverseLongLat,
   mapboxStyle,
@@ -34,8 +33,12 @@ import {
   mapProvider,
   tooltipContents,
   tooltipTemplate,
+  pathLineWidthFixedOrMetric,
+  generateDeckGLColorSchemeControls,
 } from '../../utilities/Shared_DeckGL';
 import { dndLineColumn } from '../../utilities/sharedDndControls';
+import { validateNonEmpty } from '@superset-ui/core';
+import { COLOR_SCHEME_TYPES } from '../../utilities/utils';
 
 const config: ControlPanelConfig = {
   controlPanelSections: [
@@ -71,25 +74,83 @@ const config: ControlPanelConfig = {
         [mapboxStyle],
         [maplibreStyle],
         [viewport],
-        ['color_picker'],
-        [lineWidth],
+        [reverseLongLat],
+        [autozoom],
+      ],
+    },
+    {
+      label: t('Path Size'),
+      expanded: true,
+      controlSetRows: [
+        [pathLineWidthFixedOrMetric],
         [
           {
             name: 'line_width_unit',
             config: {
               type: 'SelectControl',
               label: t('Line width unit'),
-              default: 'meters',
+              default: 'pixels',
               choices: [
                 ['meters', t('meters')],
                 ['pixels', t('pixels')],
               ],
-              renderTrigger: true,
             },
           },
         ],
-        [reverseLongLat],
-        [autozoom],
+        [
+          {
+            name: 'min_width',
+            config: {
+              type: 'TextControl',
+              label: t('Minimum Width'),
+              isFloat: true,
+              validators: [validateNonEmpty],
+              renderTrigger: true,
+              default: 1,
+              description: t(
+                'Minimum width size of the path, in pixels or meters.',
+              ),
+            },
+          },
+          {
+            name: 'max_width',
+            config: {
+              type: 'TextControl',
+              label: t('Maximum Width'),
+              isFloat: true,
+              validators: [validateNonEmpty],
+              renderTrigger: true,
+              default: 20,
+              description: t(
+                'Maximum width size of the path, in pixels or meters.',
+              ),
+            },
+          },
+        ],
+        [
+          {
+            name: 'line_width_multiplier',
+            config: {
+              type: 'TextControl',
+              label: t('Width scale multiplier'),
+              renderTrigger: true,
+              isFloat: true,
+              default: 1,
+              description: t(
+                'Scale factor applied to metric-driven line widths',
+              ),
+            },
+          },
+        ],
+      ],
+    },
+    {
+      label: t('Path Color'),
+      expanded: true,
+      controlSetRows: [
+        ...generateDeckGLColorSchemeControls({
+          defaultSchemeType: COLOR_SCHEME_TYPES.fixed_color,
+        }),
       ],
     },
     {

superset-frontend/plugins/preset-chart-deckgl/src/layers/Path/transformProps.test.ts

@@ -0,0 +1,364 @@
+/**
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements.  See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership.  The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied.  See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ */
+import { ChartProps, DatasourceType } from '@superset-ui/core';
+import transformProps from './transformProps';
+
+interface PathFeature {
+  path: [number, number][];
+  width?: number;
+  metric?: number;
+  cat_color?: string;
+  extraProps?: Record<string, unknown>;
+  [key: string]: unknown;
+}
+
+const samplePath1 = JSON.stringify([
+  [-122.4, 37.8],
+  [-122.3, 37.9],
+]);
+const samplePath2 = JSON.stringify([
+  [-122.5, 37.7],
+  [-122.4, 37.8],
+]);
+const samplePath3 = JSON.stringify([
+  [-122.6, 37.6],
+  [-122.5, 37.7],
+]);
+
+const mockChartProps: Partial<ChartProps> = {
+  rawFormData: {
+    line_column: 'path_json',
+    line_type: 'json',
+    viewport: {},
+  },
+  queriesData: [
+    {
+      data: [
+        {
+          path_json: samplePath1,
+          'AVG(weight)': 100,
+          'SUM(distance)': 500,
+          route_type: 'express',
+        },
+        {
+          path_json: samplePath2,
+          'AVG(weight)': 200,
+          'SUM(distance)': 1000,
+          route_type: 'local',
+        },
+        {
+          path_json: samplePath3,
+          'AVG(weight)': 50,
+          'SUM(distance)': 250,
+          route_type: 'express',
+        },
+      ],
+    },
+  ],
+  datasource: {
+    type: DatasourceType.Table,
+    id: 1,
+    name: 'test_datasource',
+    columns: [],
+    metrics: [],
+  },
+  height: 400,
+  width: 600,
+  hooks: {},
+  filterState: {},
+  emitCrossFilters: false,
+};
+
+test('Path transformProps should parse JSON paths correctly', () => {
+  const result = transformProps(mockChartProps as ChartProps);
+  const features = result.payload.data.features as PathFeature[];
+
+  expect(features.length).toBe(3);
+  features.forEach(f => {
+    expect(f.path).toBeDefined();
+    expect(Array.isArray(f.path)).toBe(true);
+    expect(f.path.length).toBeGreaterThan(0);
+  });
+});
+
+test('Path transformProps should handle empty records', () => {
+  const props = {
+    ...mockChartProps,
+    queriesData: [{ data: [] }],
+  };
+
+  const result = transformProps(props as ChartProps);
+  const features = result.payload.data.features as PathFeature[];
+
+  expect(features).toHaveLength(0);
+});
+
+test('Path transformProps should handle missing line_column', () => {
+  const props = {
+    ...mockChartProps,
+    rawFormData: {
+      ...mockChartProps.rawFormData,
+      line_column: undefined,
+    },
+  };
+
+  const result = transformProps(props as ChartProps);
+  const features = result.payload.data.features as PathFeature[];
+
+  expect(features).toHaveLength(0);
+});
+
+test('Path transformProps should handle invalid JSON path data', () => {
+  const props = {
+    ...mockChartProps,
+    queriesData: [
+      {
+        data: [{ path_json: 'not valid json' }, { path_json: '12345' }],
+      },
+    ],
+  };
+
+  const result = transformProps(props as ChartProps);
+  const features = result.payload.data.features as PathFeature[];
+
+  expect(features.length).toBe(2);
+  // Should not throw, paths should be empty arrays
+  features.forEach(f => {
+    expect(Array.isArray(f.path)).toBe(true);
+  });
+});
+
+test('Path transformProps should use fixed width value when line_width type is "fix"', () => {
+  const props = {
+    ...mockChartProps,
+    rawFormData: {
+      ...mockChartProps.rawFormData,
+      line_width: {
+        type: 'fix',
+        value: 5,
+      },
+    },
+  };
+
+  const result = transformProps(props as ChartProps);
+  const features = result.payload.data.features as PathFeature[];
+
+  expect(features.length).toBe(3);
+  features.forEach(f => {
+    expect(f.width).toBe(5);
+  });
+});
+
+test('Path transformProps should use fixed width with string value', () => {
+  const props = {
+    ...mockChartProps,
+    rawFormData: {
+      ...mockChartProps.rawFormData,
+      line_width: {
+        type: 'fix',
+        value: '10',
+      },
+    },
+  };
+
+  const result = transformProps(props as ChartProps);
+  const features = result.payload.data.features as PathFeature[];
+
+  features.forEach(f => {
+    expect(f.width).toBe(10);
+  });
+});
+
+test('Path transformProps should not set width when line_width is missing', () => {
+  const props = {
+    ...mockChartProps,
+    rawFormData: {
+      ...mockChartProps.rawFormData,
+      line_width: undefined,
+    },
+  };
+
+  const result = transformProps(props as ChartProps);
+  const features = result.payload.data.features as PathFeature[];
+
+  features.forEach(f => {
+    expect(f.width).toBeUndefined();
+  });
+});
+
+test('Path transformProps should use metric value for width when line_width type is "metric"', () => {
+  const props = {
+    ...mockChartProps,
+    rawFormData: {
+      ...mockChartProps.rawFormData,
+      line_width: {
+        type: 'metric',
+        value: 'AVG(weight)',
+      },
+    },
+  };
+
+  const result = transformProps(props as ChartProps);
+  const features = result.payload.data.features as PathFeature[];
+
+  expect(features).toHaveLength(3);
+  expect(features[0]?.width).toBe(50);
+});
+
+test('Path transformProps should include metric from breakpoint_metric', () => {
+  const props = {
+    ...mockChartProps,
+    rawFormData: {
+      ...mockChartProps.rawFormData,
+      breakpoint_metric: 'AVG(weight)',
+    },
+  };
+
+  const result = transformProps(props as ChartProps);
+  const features = result.payload.data.features as PathFeature[];
+
+  const metrics = features
+    .map(f => f.metric)
+    .filter((m): m is number => m !== undefined)
+    .sort((a, b) => a - b);
+
+  expect(metrics).toEqual([50, 100, 200]);
+});
+
+test('Path transformProps should fall back to base metric when breakpoint_metric is missing', () => {
+  const props = {
+    ...mockChartProps,
+    rawFormData: {
+      ...mockChartProps.rawFormData,
+      metric: 'AVG(weight)',
+      breakpoint_metric: undefined,
+    },
+  };
+
+  const result = transformProps(props as ChartProps);
+  const features = result.payload.data.features as PathFeature[];
+
+  const metrics = features
+    .map(f => f.metric)
+    .filter((m): m is number => m !== undefined)
+    .sort((a, b) => a - b);
+  expect(metrics).toEqual([50, 100, 200]);
+});
+
+test('Path transformProps should include both breakpoint_metric and width metrics if they are different', () => {
+  const props = {
+    ...mockChartProps,
+    rawFormData: {
+      ...mockChartProps.rawFormData,
+      breakpoint_metric: 'AVG(weight)',
+      line_width: {
+        type: 'metric',
+        value: 'SUM(distance)',
+      },
+    },
+  };
+
+  const result = transformProps(props as ChartProps);
+  const features = result.payload.data.features as PathFeature[];
+
+  expect(features).toHaveLength(3);
+  expect(result.payload.data.metricLabels).toEqual([
+    'AVG(weight)',
+    'SUM(distance)',
+  ]);
+});
+
+test('Path transformProps should not include both breakpoint_metric and width metrics if they are the same', () => {
+  const props = {
+    ...mockChartProps,
+    rawFormData: {
+      ...mockChartProps.rawFormData,
+      breakpoint_metric: 'SUM(distance)',
+      line_width: {
+        type: 'metric',
+        value: 'SUM(distance)',
+      },
+    },
+  };
+
+  const result = transformProps(props as ChartProps);
+
+  expect(result.payload.data.metricLabels).toEqual(['SUM(distance)']);
+});
+
+test('Path transformProps should set cat_color from dimension column', () => {
+  const props = {
+    ...mockChartProps,
+    rawFormData: {
+      ...mockChartProps.rawFormData,
+      dimension: 'route_type',
+    },
+  };
+
+  const result = transformProps(props as ChartProps);
+  const features = result.payload.data.features as PathFeature[];
+
+  expect(features).toHaveLength(3);
+  expect(features[0]?.cat_color).toBe('express');
+  expect(features[1]?.cat_color).toBe('local');
+  expect(features[2]?.cat_color).toBe('express');
+});
+
+test('Path transformProps should include metric labels when breakpoint_metric is set', () => {
+  const props = {
+    ...mockChartProps,
+    rawFormData: {
+      ...mockChartProps.rawFormData,
+      breakpoint_metric: 'AVG(weight)',
+    },
+  };
+
+  const result = transformProps(props as ChartProps);
+
+  expect(result.payload.data.metricLabels).toContain('AVG(weight)');
+});
+
+test('Path transformProps should include metric labels from base metric', () => {
+  const props = {
+    ...mockChartProps,
+    rawFormData: {
+      ...mockChartProps.rawFormData,
+      metric: 'SUM(distance)',
+    },
+  };
+
+  const result = transformProps(props as ChartProps);
+
+  expect(result.payload.data.metricLabels).toContain('SUM(distance)');
+});
+
+test('Path transformProps should have empty metric labels when no metric is set', () => {
+  const props = {
+    ...mockChartProps,
+    rawFormData: {
+      ...mockChartProps.rawFormData,
+      metric: undefined,
+      breakpoint_metric: undefined,
+    },
+  };
+
+  const result = transformProps(props as ChartProps);
+
+  expect(result.payload.data.metricLabels).toEqual([]);
+});

superset-frontend/plugins/preset-chart-deckgl/src/layers/Path/transformProps.ts

@@ -16,7 +16,7 @@
  * specific language governing permissions and limitations
  * under the License.
  */
-import { ChartProps, DTTM_ALIAS } from '@superset-ui/core';
+import { ChartProps, DTTM_ALIAS, getMetricLabel } from '@superset-ui/core';
 import { addJsColumnsToExtraProps, DataRecord } from '../spatialUtils';
 import {
   createBaseTransformResult,
@@ -26,6 +26,7 @@ import {
   addPropertiesToFeature,
 } from '../transformUtils';
 import { DeckPathFormData } from './buildQuery';
+import { isFixedValue, getFixedValue } from '../utils/metricUtils';
 
 declare global {
   interface Window {
@@ -48,6 +49,8 @@ interface PathFeature {
   path: [number, number][];
   metric?: number;
   timestamp?: unknown;
+  width?: number;
+  cat_color?: string;
   extraProps?: Record<string, unknown>;
   [key: string]: unknown;
 }
@@ -91,6 +94,9 @@ function processPathData(
   reverseLongLat: boolean = false,
   metricLabel?: string,
   jsColumns?: string[],
+  widthMetricLabel?: string,
+  fixedWidthValue?: number | string | null,
+  categoryColumn?: string,
 ): PathFeature[] {
   if (!records.length || !lineColumn) {
     return [];
@@ -103,6 +109,8 @@ function processPathData(
       'timestamp',
       DTTM_ALIAS,
       metricLabel,
+      widthMetricLabel,
+      categoryColumn,
       ...(jsColumns || []),
     ].filter(Boolean) as string[],
   );
@@ -130,6 +138,24 @@ function processPathData(
         feature.metric = metricValue;
       }
     }
+    // Set width from metric or fixed value
+    if (fixedWidthValue != null) {
+      // Use fixed width
+      const parsedFixedWidth = parseMetricValue(fixedWidthValue);
+      if (parsedFixedWidth !== undefined) {
+        feature.width = parsedFixedWidth;
+      }
+    } else if (widthMetricLabel && record[widthMetricLabel] != null) {
+      // Use metric value for width
+      const widthValue = parseMetricValue(record[widthMetricLabel]);
+      if (widthValue !== undefined) {
+        feature.width = widthValue;
+      }
+    }
+
+    if (categoryColumn && record[categoryColumn] != null) {
+      feature.cat_color = String(record[categoryColumn]);
+    }
 
     feature = addJsColumnsToExtraProps(feature, record, jsColumns);
     feature = addPropertiesToFeature(feature, record, excludeKeys);
@@ -143,11 +169,37 @@ export default function transformProps(chartProps: ChartProps) {
     line_column,
     line_type = 'json',
     metric,
+    line_width,
+    dimension,
     reverse_long_lat = false,
     js_columns,
+    breakpoint_metric,
   } = formData as DeckPathTransformPropsFormData;
 
-  const metricLabel = getMetricLabelFromFormData(metric);
+  // Check so legacy values still work
+  const fixedWidthValue =
+    typeof line_width === 'number'
+      ? line_width
+      : isFixedValue(line_width)
+        ? getFixedValue(line_width)
+        : undefined;
+
+  const widthMetricLabel = getMetricLabelFromFormData(line_width);
+
+  const breakpointMetricLabel = breakpoint_metric
+    ? getMetricLabel(breakpoint_metric)
+    : undefined;
+  const baseMetricLabel = getMetricLabelFromFormData(metric);
+  const metricLabel = breakpointMetricLabel || baseMetricLabel;
+
+  // ensure all metric labels are included
+  const metricLabels = [
+    ...(metricLabel ? [metricLabel] : []),
+    ...(widthMetricLabel && widthMetricLabel !== metricLabel
+      ? [widthMetricLabel]
+      : []),
+  ];
+
   const records = getRecordsFromQuery(chartProps.queriesData);
   const features = processPathData(
     records,
@@ -156,11 +208,10 @@ export default function transformProps(chartProps: ChartProps) {
     reverse_long_lat,
     metricLabel,
     js_columns,
+    widthMetricLabel,
+    fixedWidthValue,
+    dimension,
   ).reverse();
 
-  return createBaseTransformResult(
-    chartProps,
-    features,
-    metricLabel ? [metricLabel] : [],
-  );
+  return createBaseTransformResult(chartProps, features, metricLabels);
 }

superset-frontend/plugins/preset-chart-deckgl/src/utilities/Shared_DeckGL.tsx

@@ -285,6 +285,22 @@ export const lineWidth = {
   },
 };
 
+// created new const so as not to break lineWidth usages in other charts
+export const pathLineWidthFixedOrMetric = {
+  name: 'line_width',
+  config: {
+    type: 'FixedOrMetricControl', // using existing type
+    label: t('Line width'),
+    default: { type: 'fix', value: 1 }, // kept same default as before
+    description: t(
+      'The width of the lines as either a fixed value or variable width based on a metric.',
+    ),
+    mapStateToProps: (state: ControlPanelState) => ({
+      datasource: state.datasource,
+    }),
+  },
+};
+
 export const fillColorPicker: CustomControlItem = {
   name: 'fill_color_picker',
   config: {
@@ -673,6 +689,24 @@ export const deckGLColorBreakpointsSelect: CustomControlItem = {
   },
 };
 
+export const deckGLBreakpointMetric: CustomControlItem = {
+  name: 'breakpoint_metric',
+  config: {
+    ...sharedControls.metric,
+    label: t('Breakpoint Metric'),
+    default: null,
+    validators: [],
+    description: t(
+      'Select the metric used to determine which color breakpoint range each path falls into.',
+    ),
+    // mapStateToProps: (state: ControlPanelState) => ({
+    //   datasource: state.datasource,
+    // }),
+    visibility: ({ controls }: { controls: any }) =>
+      isColorSchemeTypeVisible(controls, COLOR_SCHEME_TYPES.color_breakpoints),
+  },
+};
+
 export const breakpointsDefaultColor: CustomControlItem = {
   name: 'default_breakpoint_color',
   config: {
@@ -725,6 +759,7 @@ export const generateDeckGLColorSchemeControls = ({
   [deckGLFixedColor],
   disableCategoricalColumn ? [] : [deckGLCategoricalColor],
   [deckGLCategoricalColorSchemeSelect],
+  [deckGLBreakpointMetric],
   [breakpointsDefaultColor],
   [deckGLColorBreakpointsSelect],
 ];

superset-frontend/src/SqlLab/components/HighlightedSql/index.tsx

@@ -47,6 +47,13 @@ const Title = styled.h4`
   font-weight: ${({ theme }) => theme.fontWeightStrong};
 `;
 
+const StyledTabs = styled(Tabs)`
+  margin-top: ${({ theme }) => theme.sizeUnit * -8}px;
+  .ant-tabs-nav {
+    margin-bottom: ${({ theme }) => theme.sizeUnit * 4}px;
+  }
+`;
+
 const shrinkSql = (sql: string, maxLines: number, maxWidth: number) => {
   const ssql = sql || '';
   let lines = ssql.split('\n');
@@ -94,7 +101,7 @@ function HighlightSqlModal({ rawSql, sql }: HighlightedSqlModalTypes) {
   }
 
   return (
-    <Tabs
+    <StyledTabs
       defaultActiveKey="executed"
       items={[
         {

superset-frontend/src/chartCustomizations/components/DynamicGroupBy/controlPanel.test.ts

@@ -0,0 +1,53 @@
+/**
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements.  See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership.  The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied.  See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ */
+import config from './controlPanel';
+
+type ControlConfig = {
+  label?: unknown;
+  description?: unknown;
+};
+
+type ControlItem = {
+  config: ControlConfig;
+} | null;
+
+function collectFunctionProps(cfg: typeof config) {
+  const fns: Array<() => unknown> = [];
+  cfg.controlPanelSections.forEach(section => {
+    section?.controlSetRows.forEach(row => {
+      (row as ControlItem[]).forEach(item => {
+        if (item && typeof item === 'object' && 'config' in item) {
+          const { label, description } = item.config;
+          if (typeof label === 'function') fns.push(label as () => unknown);
+          if (typeof description === 'function')
+            fns.push(description as () => unknown);
+        }
+      });
+    });
+  });
+  return fns;
+}
+
+test('DynamicGroupBy controlPanel label and description functions return strings', () => {
+  const fns = collectFunctionProps(config);
+  expect(fns.length).toBeGreaterThan(0);
+  fns.forEach(fn => {
+    expect(typeof fn()).toBe('string');
+  });
+});

superset-frontend/src/chartCustomizations/components/DynamicGroupBy/controlPanel.ts

@@ -49,12 +49,12 @@ const config: ControlPanelConfig = {
             name: 'canSelectMultiple',
             config: {
               type: 'CheckboxControl',
-              label: t('Can select multiple values'),
+              label: () => t('Can select multiple values'),
               default: true,
               renderTrigger: true,
               resetConfig: true,
               affectsDataMask: true,
-              description: t('Allow users to select multiple values'),
+              description: () => t('Allow users to select multiple values'),
             },
           },
         ],
@@ -63,12 +63,13 @@ const config: ControlPanelConfig = {
             name: 'enableEmptyFilter',
             config: {
               type: 'CheckboxControl',
-              label: t('Chart customization value is required'),
+              label: () => t('Chart customization value is required'),
               default: false,
               renderTrigger: true,
-              description: t(
-                'User must select a value before applying the chart customization',
-              ),
+              description: () =>
+                t(
+                  'User must select a value before applying the chart customization',
+                ),
             },
           },
         ],

superset-frontend/src/chartCustomizations/components/TimeColumn/controlPanel.test.ts

@@ -0,0 +1,53 @@
+/**
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements.  See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership.  The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied.  See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ */
+import config from './controlPanel';
+
+type ControlConfig = {
+  label?: unknown;
+  description?: unknown;
+};
+
+type ControlItem = {
+  config: ControlConfig;
+} | null;
+
+function collectFunctionProps(cfg: typeof config) {
+  const fns: Array<() => unknown> = [];
+  cfg.controlPanelSections.forEach(section => {
+    section?.controlSetRows.forEach(row => {
+      (row as ControlItem[]).forEach(item => {
+        if (item && typeof item === 'object' && 'config' in item) {
+          const { label, description } = item.config;
+          if (typeof label === 'function') fns.push(label as () => unknown);
+          if (typeof description === 'function')
+            fns.push(description as () => unknown);
+        }
+      });
+    });
+  });
+  return fns;
+}
+
+test('TimeColumn controlPanel label and description functions return strings', () => {
+  const fns = collectFunctionProps(config);
+  expect(fns.length).toBeGreaterThan(0);
+  fns.forEach(fn => {
+    expect(typeof fn()).toBe('string');
+  });
+});

superset-frontend/src/chartCustomizations/components/TimeColumn/controlPanel.ts

@@ -30,12 +30,11 @@ const config: ControlPanelConfig = {
             name: 'enableEmptyFilter',
             config: {
               type: 'CheckboxControl',
-              label: t('Filter value is required'),
+              label: () => t('Filter value is required'),
               default: false,
               renderTrigger: true,
-              description: t(
-                'User must select a value before applying the filter',
-              ),
+              description: () =>
+                t('User must select a value before applying the filter'),
             },
           },
         ],

superset-frontend/src/chartCustomizations/components/TimeGrain/controlPanel.test.ts

@@ -0,0 +1,53 @@
+/**
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements.  See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership.  The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied.  See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ */
+import config from './controlPanel';
+
+type ControlConfig = {
+  label?: unknown;
+  description?: unknown;
+};
+
+type ControlItem = {
+  config: ControlConfig;
+} | null;
+
+function collectFunctionProps(cfg: typeof config) {
+  const fns: Array<() => unknown> = [];
+  cfg.controlPanelSections.forEach(section => {
+    section?.controlSetRows.forEach(row => {
+      (row as ControlItem[]).forEach(item => {
+        if (item && typeof item === 'object' && 'config' in item) {
+          const { label, description } = item.config;
+          if (typeof label === 'function') fns.push(label as () => unknown);
+          if (typeof description === 'function')
+            fns.push(description as () => unknown);
+        }
+      });
+    });
+  });
+  return fns;
+}
+
+test('TimeGrain controlPanel label and description functions return strings', () => {
+  const fns = collectFunctionProps(config);
+  expect(fns.length).toBeGreaterThan(0);
+  fns.forEach(fn => {
+    expect(typeof fn()).toBe('string');
+  });
+});

superset-frontend/src/chartCustomizations/components/TimeGrain/controlPanel.ts

@@ -30,12 +30,11 @@ const config: ControlPanelConfig = {
             name: 'enableEmptyFilter',
             config: {
               type: 'CheckboxControl',
-              label: t('Customization value is required'),
+              label: () => t('Customization value is required'),
               default: false,
               renderTrigger: true,
-              description: t(
-                'User must select a value before applying the customization',
-              ),
+              description: () =>
+                t('User must select a value before applying the customization'),
             },
           },
         ],

superset-frontend/src/components/Chart/chartAction.ts

@@ -42,7 +42,10 @@ import {
   getQuerySettings,
   getChartDataUri,
 } from 'src/explore/exploreUtils';
-import { addDangerToast } from 'src/components/MessageToasts/actions';
+import {
+  addDangerToast,
+  addWarningToast,
+} from 'src/components/MessageToasts/actions';
 import { logEvent } from 'src/logger/actions';
 import { Logger, LOG_ACTIONS_LOAD_CHART } from 'src/logger/LogUtils';
 import { allowCrossDomain as domainShardingEnabled } from 'src/utils/hostNamesConfig';
@@ -813,6 +816,11 @@ export function exploreJSON(
               }),
             ),
         );
+        (queriesResponse as QueryData[]).forEach(response => {
+          if (response.warning) {
+            dispatch(addWarningToast(response.warning, { noDuplicate: true }));
+          }
+        });
         return dispatch(
           chartUpdateSucceeded(queriesResponse as QueryData[], key as number),
         );

superset-frontend/src/components/Chart/chartActions.test.ts

@@ -31,6 +31,7 @@ import {
   AnnotationSourceType,
   AnnotationStyle,
 } from '@superset-ui/core';
+import * as toastActions from 'src/components/MessageToasts/actions';
 import { LOG_EVENT } from 'src/logger/actions';
 import * as exploreUtils from 'src/explore/exploreUtils';
 import * as actions from 'src/components/Chart/chartAction';
@@ -412,6 +413,56 @@ describe('chart actions', () => {
       );
       expect(result).toEqual([1, 2, 3]);
     });
+
+    test('dispatches addWarningToast when a query response includes a warning', async () => {
+      const warningMessage =
+        'Results truncated to 1,000 rows due to memory constraints.';
+      fetchMock.removeRoute(MOCK_URL);
+      fetchMock.post(
+        `glob:*${MOCK_URL}*`,
+        { result: [{ warning: warningMessage }] },
+        { name: MOCK_URL },
+      );
+      const addWarningToastSpy = jest.spyOn(toastActions, 'addWarningToast');
+
+      const actionThunk = actions.postChartFormData(
+        { viz_type: 'my_viz' } as QueryFormData,
+        false,
+        undefined,
+        undefined,
+      );
+      await actionThunk(
+        dispatch as unknown as actions.ChartThunkDispatch,
+        mockGetState as unknown as () => actions.RootState,
+        undefined,
+      );
+
+      expect(addWarningToastSpy).toHaveBeenCalledWith(warningMessage, {
+        noDuplicate: true,
+      });
+      addWarningToastSpy.mockRestore();
+      fetchMock.removeRoute(MOCK_URL);
+      setupDefaultFetchMock();
+    });
+
+    test('does not dispatch addWarningToast when no query response has a warning', async () => {
+      const addWarningToastSpy = jest.spyOn(toastActions, 'addWarningToast');
+
+      const actionThunk = actions.postChartFormData(
+        { viz_type: 'my_viz' } as QueryFormData,
+        false,
+        undefined,
+        undefined,
+      );
+      await actionThunk(
+        dispatch as unknown as actions.ChartThunkDispatch,
+        mockGetState as unknown as () => actions.RootState,
+        undefined,
+      );
+
+      expect(addWarningToastSpy).not.toHaveBeenCalled();
+      addWarningToastSpy.mockRestore();
+    });
   });
 
   // eslint-disable-next-line no-restricted-globals -- TODO: Migrate from describe blocks

superset-frontend/src/dashboard/actions/dashboardLayout.ts

@@ -34,6 +34,7 @@ import { DropResult } from 'src/dashboard/components/dnd/dragDroppableConfig';
 import { GetState, LayoutItem, RootState } from '../types';
 import { updateLayoutComponents } from './dashboardFilters';
 import { setUnsavedChanges } from './dashboardState';
+
 type AppDispatch = ThunkDispatch<RootState, undefined, AnyAction>;
 
 // Component CRUD -------------------------------------------------------------

superset-frontend/src/dashboard/actions/dashboardState.ts

@@ -468,9 +468,12 @@ export function saveDashboardRequest(
     );
     const cleanedData: JsonObject = {
       ...data,
-      certified_by: certified_by || '',
-      certification_details:
-        certified_by && certification_details ? certification_details : '',
+      ...(certified_by !== undefined && {
+        certified_by,
+        certification_details: certified_by
+          ? (certification_details ?? '')
+          : '',
+      }),
       css: css || '',
       dashboard_title: dashboard_title || t('[ untitled dashboard ]'),
       owners: ensureIsArray(owners as JsonObject[]).map((o: JsonObject) =>

superset-frontend/src/dashboard/components/SliceAdder.tsx

@@ -118,7 +118,7 @@ const NewChartButtonContainer = styled.div`
   ${({ theme }) => css`
     display: flex;
     justify-content: flex-end;
-    padding-right: ${theme.sizeUnit * 2}px;
+    padding: ${theme.sizeUnit * 3}px ${theme.sizeUnit * 2}px 0;
   `}
 `;
 

superset-frontend/src/explore/components/ControlPanelsContainer.test.tsx

@@ -234,6 +234,26 @@ describe('ControlPanelsContainer', () => {
     );
   });
 
+  test('renders section with function label and description', async () => {
+    getChartControlPanelRegistry().remove('table');
+    getChartControlPanelRegistry().registerValue('table', {
+      controlPanelSections: [
+        {
+          label: () => t('Dynamic Section Label'),
+          description: () => t('Dynamic section description'),
+          expanded: true,
+          controlSetRows: [['groupby']],
+        },
+      ],
+    });
+    render(<ControlPanelsContainer {...getDefaultProps()} />, {
+      useRedux: true,
+    });
+    await waitFor(() => {
+      expect(screen.getByText('Dynamic Section Label')).toBeInTheDocument();
+    });
+  });
+
   test('hidden state of controls is correctly applied', async () => {
     getChartControlPanelRegistry().remove('table');
     getChartControlPanelRegistry().registerValue('table', {

superset-frontend/src/explore/components/ControlPanelsContainer.tsx

@@ -630,10 +630,17 @@ export const ControlPanelsContainer = (props: ControlPanelsContainerProps) => {
             line-height: 1.3;
           `}
         >
-          {label}
+          {typeof label === 'function' ? (label as () => ReactNode)() : label}
         </span>{' '}
         {description && (
-          <Tooltip id={sectionId} title={description}>
+          <Tooltip
+            id={sectionId}
+            title={
+              typeof description === 'function'
+                ? (description as () => ReactNode)()
+                : description
+            }
+          >
             <Icons.InfoCircleOutlined css={iconStyles} />
           </Tooltip>
         )}

superset-frontend/src/explore/components/controls/DateFilterControl/DateFilterLabel.tsx

@@ -125,7 +125,7 @@ const getTooltipTitle = (
 ) =>
   isLabelTruncated ? (
     <div>
-      {label && <strong>{label}</strong>}
+      {label && <strong>{t(label)}</strong>}
       {range && (
         <div
           css={(theme: SupersetTheme) => css`
@@ -160,7 +160,7 @@ export default function DateFilterLabel(props: DateFilterControlProps) {
   const [timeRangeValue, setTimeRangeValue] = useState(value);
   const [validTimeRange, setValidTimeRange] = useState<boolean>(false);
   const [evalResponse, setEvalResponse] = useState<string>(value);
-  const [tooltipTitle, setTooltipTitle] = useState<ReactNode | null>(value);
+  const [tooltipTitle, setTooltipTitle] = useState<ReactNode | null>(t(value));
   const theme = useTheme();
   const [labelRef, labelIsTruncated] = useCSSTextTruncation<HTMLSpanElement>();
 
@@ -175,7 +175,7 @@ export default function DateFilterLabel(props: DateFilterControlProps) {
       if (error) {
         setEvalResponse(error || '');
         setValidTimeRange(false);
-        setTooltipTitle(value || null);
+        setTooltipTitle(t(value) || null);
       } else {
         /*
           HRT == human readable text

superset-frontend/src/explore/components/controls/FilterControl/AdhocFilterEditPopoverSimpleTabContent/AdhocFilterEditPopoverSimpleTabContent.test.tsx

@@ -486,6 +486,70 @@ test('sets comparator to undefined when operator is IS_NULL or IS_NOT_NULL', ()
   });
 });
 
+test('hides the value input when operator is IS_NULL', () => {
+  setup({
+    adhocFilter: new AdhocFilter({
+      expressionType: ExpressionTypes.Simple,
+      subject: 'value',
+      operatorId: Operators.IsNull,
+      operator: OPERATOR_ENUM_TO_OPERATOR_TYPE[Operators.IsNull].operation,
+      comparator: undefined,
+      clause: Clauses.Where,
+    }),
+  });
+  expect(
+    screen.queryByPlaceholderText('Filter value (case sensitive)'),
+  ).not.toBeInTheDocument();
+});
+
+test('hides the value input when operator is IS_NOT_NULL', () => {
+  setup({
+    adhocFilter: new AdhocFilter({
+      expressionType: ExpressionTypes.Simple,
+      subject: 'value',
+      operatorId: Operators.IsNotNull,
+      operator: OPERATOR_ENUM_TO_OPERATOR_TYPE[Operators.IsNotNull].operation,
+      comparator: undefined,
+      clause: Clauses.Where,
+    }),
+  });
+  expect(
+    screen.queryByPlaceholderText('Filter value (case sensitive)'),
+  ).not.toBeInTheDocument();
+});
+
+test('hides the value input when operator is IS_TRUE', () => {
+  setup({
+    adhocFilter: new AdhocFilter({
+      expressionType: ExpressionTypes.Simple,
+      subject: 'value',
+      operatorId: Operators.IsTrue,
+      operator: OPERATOR_ENUM_TO_OPERATOR_TYPE[Operators.IsTrue].operation,
+      comparator: undefined,
+      clause: Clauses.Where,
+    }),
+  });
+  expect(
+    screen.queryByPlaceholderText('Filter value (case sensitive)'),
+  ).not.toBeInTheDocument();
+});
+
+test('hides the value input when operator is IS_FALSE', () => {
+  setup({
+    adhocFilter: new AdhocFilter({
+      expressionType: ExpressionTypes.Simple,
+      subject: 'value',
+      operatorId: Operators.IsFalse,
+      operator: OPERATOR_ENUM_TO_OPERATOR_TYPE[Operators.IsFalse].operation,
+      comparator: undefined,
+      clause: Clauses.Where,
+    }),
+  });
+  expect(
+    screen.queryByPlaceholderText('Filter value (case sensitive)'),
+  ).not.toBeInTheDocument();
+});
+
 test('should not call API when column has no advanced data type', async () => {
   const props = getAdvancedDataTypeTestProps();
 

superset-frontend/src/explore/components/controls/FilterControl/AdhocFilterEditPopoverSimpleTabContent/index.tsx

@@ -377,6 +377,14 @@ const AdhocFilterEditPopoverSimpleTabContent: FC<Props> = props => {
   const shouldFocusComparator =
     !!subjectSelectProps.value && !!operatorSelectProps.value;
 
+  const isUnaryOperator =
+    operatorId !== undefined &&
+    DISABLE_INPUT_OPERATORS.includes(operatorId as Operators);
+
+  const hasComparatorOptions =
+    (operatorId && MULTI_OPERATORS.has(operatorId as Operators)) ||
+    suggestions.length > 0;
+
   const comparatorSelectProps = {
     allowClear: true,
     allowNewOptions: true,
@@ -389,9 +397,6 @@ const AdhocFilterEditPopoverSimpleTabContent: FC<Props> = props => {
     value: comparator as SelectValue,
     onChange: onComparatorChange,
     notFoundContent: t('Type a value here'),
-    disabled:
-      operatorId !== undefined &&
-      DISABLE_INPUT_OPERATORS.includes(operatorId as Operators),
     placeholder: createSuggestionsPlaceholder(),
   };
 
@@ -554,49 +559,45 @@ const AdhocFilterEditPopoverSimpleTabContent: FC<Props> = props => {
           }))}
         {...operatorSelectProps}
       />
-      {(operatorId && MULTI_OPERATORS.has(operatorId as Operators)) ||
-      suggestions.length > 0 ? (
-        <Tooltip
-          title={
-            advancedDataTypesState.errorMessage ||
-            advancedDataTypesState.parsedAdvancedDataType
-          }
-        >
-          <SelectWithLabel
-            css={css`
-              margin-top: ${theme.marginXS}px;
-            `}
-            labelText={labelText}
-            options={suggestions}
-            {...comparatorSelectProps}
-          />
-        </Tooltip>
-      ) : (
-        <Tooltip
-          title={
-            advancedDataTypesState.errorMessage ||
-            advancedDataTypesState.parsedAdvancedDataType
-          }
-        >
-          <div
-            css={css`
-              margin-top: ${theme.marginXS}px;
-            `}
-          />
-          <Input
-            data-test="adhoc-filter-simple-value"
-            name="filter-value"
-            ref={comparatorInputRef}
-            onChange={onInputComparatorChange}
-            value={typeof comparator === 'string' ? comparator : undefined}
-            placeholder={t('Filter value (case sensitive)')}
-            disabled={
-              operatorId !== undefined &&
-              DISABLE_INPUT_OPERATORS.includes(operatorId as Operators)
+      {!isUnaryOperator &&
+        (hasComparatorOptions ? (
+          <Tooltip
+            title={
+              advancedDataTypesState.errorMessage ||
+              advancedDataTypesState.parsedAdvancedDataType
             }
-          />
-        </Tooltip>
-      )}
+          >
+            <SelectWithLabel
+              css={css`
+                margin-top: ${theme.marginXS}px;
+              `}
+              labelText={labelText}
+              options={suggestions}
+              {...comparatorSelectProps}
+            />
+          </Tooltip>
+        ) : (
+          <Tooltip
+            title={
+              advancedDataTypesState.errorMessage ||
+              advancedDataTypesState.parsedAdvancedDataType
+            }
+          >
+            <div
+              css={css`
+                margin-top: ${theme.marginXS}px;
+              `}
+            />
+            <Input
+              data-test="adhoc-filter-simple-value"
+              name="filter-value"
+              ref={comparatorInputRef}
+              onChange={onInputComparatorChange}
+              value={typeof comparator === 'string' ? comparator : undefined}
+              placeholder={t('Filter value (case sensitive)')}
+            />
+          </Tooltip>
+        ))}
     </>
   );
   return (

superset-frontend/src/explore/components/controls/ViewQuery.tsx

@@ -62,6 +62,8 @@ const StyledSyntaxContainer = styled.div`
 
 const StyledThemedSyntaxHighlighter = styled(CodeSyntaxHighlighter)`
   flex: 1;
+  height: ${({ theme }) => theme.sizeUnit * 26}px;
+  margin-top: 0;
 `;
 
 const StyledFooter = styled.div`
@@ -163,7 +165,12 @@ const ViewQuery: FC<ViewQueryProps> = props => {
         ) : (
           <StyledThemedSyntaxHighlighter
             language={language}
-            customStyle={{ flex: 1, marginBottom: theme.sizeUnit * 3 }}
+            customStyle={{
+              flex: 1,
+              marginBottom: theme.sizeUnit * 3,
+              fontSize: theme.fontSize * 0.75,
+              padding: 0,
+            }}
           >
             {currentSQL}
           </StyledThemedSyntaxHighlighter>

superset-frontend/src/features/semanticLayers/MultiEnumControl.test.tsx

@@ -0,0 +1,96 @@
+/**
+ * Licensed to the Apache Software Foundation (ASF) under one
+ * or more contributor license agreements.  See the NOTICE file
+ * distributed with this work for additional information
+ * regarding copyright ownership.  The ASF licenses this file
+ * to you under the Apache License, Version 2.0 (the
+ * "License"); you may not use this file except in compliance
+ * with the License.  You may obtain a copy of the License at
+ *
+ *   http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+ * KIND, either express or implied.  See the License for the
+ * specific language governing permissions and limitations
+ * under the License.
+ */
+import type { ControlProps } from '@jsonforms/core';
+import { render, screen, userEvent } from 'spec/helpers/testing-library';
+
+import { MultiEnumControl } from './jsonFormsHelpers';
+
+const baseProps = (overrides: Partial<ControlProps> = {}): ControlProps =>
+  ({
+    label: 'Tags',
+    path: 'tags',
+    enabled: true,
+    schema: {
+      type: 'array',
+      items: {
+        enum: ['a', 'b', 'c'],
+        'x-enumNames': ['Apple', 'Banana', 'Cherry'],
+      },
+    },
+    uischema: { type: 'Control', scope: '#/properties/tags', options: {} },
+    data: [],
+    handleChange: jest.fn(),
+    config: {},
+    ...overrides,
+  }) as unknown as ControlProps;
+
+test('renders enum labels from items.x-enumNames', async () => {
+  render(<MultiEnumControl {...baseProps()} />);
+  await userEvent.click(screen.getByRole('combobox'));
+  expect(await screen.findByText('Apple')).toBeInTheDocument();
+  expect(screen.getByText('Banana')).toBeInTheDocument();
+  expect(screen.getByText('Cherry')).toBeInTheDocument();
+});
+
+test('falls back to raw enum values when x-enumNames is absent', async () => {
+  const props = baseProps({
+    schema: { type: 'array', items: { enum: ['red', 'green'] } },
+  });
+  const { container } = render(<MultiEnumControl {...props} />);
+  await userEvent.click(screen.getByRole('combobox'));
+  await screen.findAllByText('red');
+  const options = container.ownerDocument.querySelectorAll(
+    '.ant-select-item-option-content',
+  );
+  expect(Array.from(options).map(el => el.textContent)).toEqual([
+    'red',
+    'green',
+  ]);
+});
+
+test('emits the new array via handleChange when an option is picked', async () => {
+  const handleChange = jest.fn();
+  render(<MultiEnumControl {...baseProps({ handleChange })} />);
+  await userEvent.click(screen.getByRole('combobox'));
+  await userEvent.click(await screen.findByText('Banana'));
+  expect(handleChange).toHaveBeenLastCalledWith('tags', ['b']);
+});
+
+test('renders existing data as selected tags using x-enumNames labels', () => {
+  render(<MultiEnumControl {...baseProps({ data: ['a', 'c'] })} />);
+  // Selected items render in a hidden listbox with role=option,
+  // but the tag text is the user-visible label.
+  expect(screen.getByText('Apple')).toBeInTheDocument();
+  expect(screen.getByText('Cherry')).toBeInTheDocument();
+  expect(screen.queryByText('Banana')).not.toBeInTheDocument();
+});
+
+test('shows a loading state when config.refreshingSchema is true', () => {
+  const { container } = render(
+    <MultiEnumControl {...baseProps({ config: { refreshingSchema: true } })} />,
+  );
+  expect(container.querySelector('.ant-select-arrow-loading')).toBeTruthy();
+});
+
+test('treats non-array data as an empty selection without crashing', () => {
+  render(<MultiEnumControl {...baseProps({ data: undefined })} />);
+  // No tags rendered when data is missing
+  expect(screen.queryByText('Apple')).not.toBeInTheDocument();
+  expect(screen.queryByText('Banana')).not.toBeInTheDocument();
+});

superset-frontend/src/features/semanticLayers/jsonFormsHelpers.test.ts

@@ -16,7 +16,7 @@
  * specific language governing permissions and limitations
  * under the License.
  */
-import type { JsonSchema } from '@jsonforms/core';
+import type { JsonSchema, UISchemaElement } from '@jsonforms/core';
 
 import {
   areDependenciesSatisfied,
@@ -24,8 +24,16 @@ import {
   buildUiSchema,
   getDynamicDependencies,
   serializeDependencyValues,
+  multiEnumEntry,
+  enumNamesEntry,
 } from './jsonFormsHelpers';
 
+const control = {
+  type: 'Control',
+  scope: '#',
+} as unknown as UISchemaElement;
+const ctx = { rootSchema: {} as JsonSchema, config: {} };
+
 test('areDependenciesSatisfied returns true for present dependency values', () => {
   expect(
     areDependenciesSatisfied(['database', 'schema'], {
@@ -148,3 +156,38 @@ test('serializeDependencyValues is stable and sorted by key', () => {
     JSON.stringify({ database: 'analytics', warehouse: 'compute_wh' }),
   );
 });
+
+test('multiEnumEntry.tester matches array schemas with non-empty items.enum', () => {
+  const schema = {
+    type: 'array',
+    items: { enum: ['a', 'b'] },
+  } as unknown as JsonSchema;
+  expect(multiEnumEntry.tester(control, schema, ctx)).toBe(35);
+});
+
+test.each([
+  ['empty items.enum', { type: 'array', items: { enum: [] } }],
+  ['items without enum', { type: 'array', items: { type: 'string' } }],
+  ['array without items', { type: 'array' }],
+  ['scalar enum', { type: 'string', enum: ['a', 'b'] }],
+])('multiEnumEntry.tester does not match %s', (_label, schema) => {
+  expect(multiEnumEntry.tester(control, schema as JsonSchema, ctx)).toBe(-1);
+});
+
+test('enumNamesEntry.tester matches scalar enum with x-enumNames', () => {
+  const schema = {
+    type: 'string',
+    enum: ['a', 'b'],
+    'x-enumNames': ['Alpha', 'Beta'],
+  } as JsonSchema;
+  expect(enumNamesEntry.tester(control, schema, ctx)).toBe(5);
+});
+
+test('enumNamesEntry.tester does not match array schemas (multiEnum owns those)', () => {
+  const schema = {
+    type: 'array',
+    items: { enum: ['a'], 'x-enumNames': ['Alpha'] },
+    'x-enumNames': ['Alpha'],
+  } as JsonSchema;
+  expect(enumNamesEntry.tester(control, schema, ctx)).toBe(-1);
+});

superset-frontend/src/features/semanticLayers/jsonFormsHelpers.tsx

@@ -252,25 +252,108 @@ function EnumNamesControl(props: ControlProps) {
   );
 }
 const EnumNamesRenderer = withJsonFormsControlProps(EnumNamesControl);
-const enumNamesEntry = {
+export const enumNamesEntry = {
   // Rank 5: higher than the default string renderer (2–3) so this fires
   // whenever x-enumNames is present, regardless of the underlying type.
+  // Array-of-enum schemas are handled by ``multiEnumEntry`` below — this
+  // renderer only targets scalar string/number controls.
   tester: rankWith(
     5,
-    schemaMatches(s => {
-      const names = (s as Record<string, unknown>)['x-enumNames'];
-      return Array.isArray(names) && (names as unknown[]).length > 0;
-    }),
+    and(
+      schemaMatches(s => {
+        const names = (s as Record<string, unknown>)['x-enumNames'];
+        return Array.isArray(names) && (names as unknown[]).length > 0;
+      }),
+      schemaMatches(s => (s as Record<string, unknown>)?.type !== 'array'),
+    ),
   ),
   renderer: EnumNamesRenderer,
 };
 
+/**
+ * Renderer for ``{type: 'array', items: {enum: [...]}}`` schemas.  Renders
+ * a single Antd Select with ``mode="multiple"`` (tag-style multi-select),
+ * matching the natural expectation of a "pick several from a list" control.
+ *
+ * Without this, the default ``PrimitiveArrayControl`` from the upstream
+ * library renders an "Add …" button that creates one single-select per
+ * element — visually wrong for an enum multi-select and unable to display
+ * ``items.x-enumNames`` labels.
+ *
+ * The renderer is dynamic-aware: when the host form is refreshing the
+ * schema (e.g. compatible options narrowing as the user picks), the Select
+ * shows a loading indicator without becoming disabled, so the user can
+ * continue editing while options refresh.
+ */
+export function MultiEnumControl(props: ControlProps) {
+  const { refreshingSchema } = props.config ?? {};
+  const arraySchema = props.schema as Record<string, unknown>;
+  const itemsSchema =
+    (arraySchema.items as Record<string, unknown>) ??
+    ({} as Record<string, unknown>);
+
+  const enumValues = (itemsSchema.enum as unknown[]) ?? [];
+  const enumNames =
+    (itemsSchema['x-enumNames'] as string[]) ?? enumValues.map(String);
+
+  const options = enumValues.map((value, index) => ({
+    value: value as string | number,
+    label: enumNames[index] ?? String(value),
+  }));
+
+  const value = Array.isArray(props.data) ? (props.data as unknown[]) : [];
+
+  const tooltip = (props.uischema?.options as Record<string, unknown>)
+    ?.tooltip as string | undefined;
+
+  return (
+    <Form.Item label={props.label} tooltip={tooltip}>
+      <Select
+        mode="multiple"
+        value={value as (string | number)[]}
+        onChange={next => props.handleChange(props.path, next)}
+        options={options}
+        style={{ width: '100%' }}
+        disabled={!props.enabled}
+        loading={!!refreshingSchema}
+        allowClear
+        optionFilterProp="label"
+        placeholder={
+          (props.uischema?.options as Record<string, unknown>)
+            ?.placeholderText as string | undefined
+        }
+      />
+    </Form.Item>
+  );
+}
+const MultiEnumRenderer = withJsonFormsControlProps(MultiEnumControl);
+export const multiEnumEntry = {
+  // Rank 35: must beat upstream ``PrimitiveArrayRenderer`` (rank 30) so an
+  // ``array``/``items.enum`` schema renders as one Antd multi-select tag
+  // box instead of the "Add" repeater pattern that PrimitiveArray uses.
+  tester: rankWith(
+    35,
+    schemaMatches(s => {
+      const schema = s as Record<string, unknown>;
+      if (schema?.type !== 'array') return false;
+      const items = schema.items as Record<string, unknown> | undefined;
+      return (
+        !!items &&
+        Array.isArray(items.enum) &&
+        (items.enum as unknown[]).length > 0
+      );
+    }),
+  ),
+  renderer: MultiEnumRenderer,
+};
+
 export const renderers = [
   ...rendererRegistryEntries,
   passwordEntry,
   constEntry,
   readOnlyEntry,
   enumNamesEntry,
+  multiEnumEntry,
   dynamicFieldEntry,
 ];
 

superset-frontend/src/features/semanticViews/AddSemanticViewModal.tsx

@@ -254,7 +254,10 @@ export default function AddSemanticViewModal({
           !schema?.properties ||
           Object.keys(schema.properties).length === 0
         ) {
-          // No runtime config needed — fetch views right away
+          // Preserve top-level runtime metadata (e.g. x-singleView) even when
+          // there are no form fields, then fetch views right away.  Skip the
+          // apply call entirely if the backend returned no schema at all.
+          if (schema) applyRuntimeSchema(schema);
           fetchViews(uuid, {}, gen);
         } else {
           applyRuntimeSchema(schema);
@@ -456,6 +459,31 @@ export default function AddSemanticViewModal({
   const viewsDisabled =
     loadingViews || (!loadingViews && availableViews.length === 0);
 
+  // When ``x-singleView: true`` the runtime form fully describes a single
+  // semantic view (e.g. a MetricFlow cube).  Hide the picker and auto-select
+  // whatever ``get_semantic_views`` returned so the Add button can fire
+  // without an extra user click.
+  const singleViewMode =
+    (runtimeSchema as Record<string, unknown> | null)?.['x-singleView'] ===
+    true;
+
+  useEffect(() => {
+    if (!singleViewMode) return;
+    const namesToAdd = availableViews
+      .filter(v => !v.already_added)
+      .map(v => v.name)
+      .slice(0, 1);
+    setSelectedViewNames(prev => {
+      if (
+        prev.length === namesToAdd.length &&
+        prev.every((n, i) => n === namesToAdd[i])
+      ) {
+        return prev;
+      }
+      return namesToAdd;
+    });
+  }, [singleViewMode, availableViews]);
+
   return (
     <StandardModal
       show={show}
@@ -511,8 +539,12 @@ export default function AddSemanticViewModal({
           </>
         )}
 
-        {/* Semantic Views — always visible once a layer is selected */}
-        {selectedLayerUuid && !loadingRuntime && (
+        {/* Semantic Views — always visible once a layer is selected, unless
+            the runtime schema declares ``x-singleView: true``: extensions
+            (e.g. MetricFlow cubes) whose runtime form fully describes a
+            single view set that flag so the picker disappears and the
+            view is auto-selected when ``get_semantic_views`` returns it. */}
+        {selectedLayerUuid && !loadingRuntime && !singleViewMode && (
           <ModalFormField label={t('Semantic Views')}>
             <Select
               ariaLabel={t('Semantic views')}

superset-frontend/src/features/users/UserListModal.tsx

@@ -94,7 +94,7 @@ function UserListModal({
     } else {
       try {
         await createUser(values);
-        addSuccessToast(t('The group has been created successfully.'));
+        addSuccessToast(t('The user has been created successfully.'));
       } catch (err) {
         await handleError(err, Actions.CREATE);
       }